• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.535-541
• /
• 2014

In this research, three degree-of-freedom parallel spherical robot is developed for an artificial eyeball. The proposed system is comprised of a moving and a base plate, three prismatic actuators, and a ball joint for an angular movement of the moving plate. The vector analysis is employed to investigate the relationship between positions of the actuators and a pose of the moving plate. The required ranges for every actuators are calculated using the derived inverse kinematics in regard to the combination of two different levels for the size of the system component. Then the size of every components is determined from the analyzed trend. PI controller is employed for the position control of the moving plate. Finally the proposed system is verified using an arbitrary path of the angular movement.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.167-176
• /
• 2007

The purpose of this study was to offer suitable model for performing Tippelt motion and data for training Tippelt motion through the quantitative kinematical analysis of Tippelt motion in parallel bars. The results of analysing kinematic variations through three-dimensional reflection analysis of three members of the national team as the objects of the study were shown as follows. 1. It seemed that the shoulder-joints which are stretched as much as possible affects the whole Tippelt motion while one is swinging downward. The time of process of the center of mass for the body reaching to the maximum flection point should be quick and body's moving from the vertical phase to the front direction should be controled as much as possible. 2. While one is swinging upward, the stability of flying motion could be made certain by the control of body's rapid moving to the front direction and stretching shoulder-joints and hip-joint to reverse direction. 3. While one is flying upward, the body should be erected quickly and lessening the angle of the hip-joint affects the elevation of flight. When the powerful counter turn motion is performed, the stable motion could be made. As a result of this study, It seems that sudden fall and the maximum stretch of shoulder-joints is important during performing Tippelt motion in parallel bars. Also, it concludes that the maximum bending of hip-joints at the starting point of upward swing, sudden stretch to the reverse direction of shoulder-joints and hip-joints when one is leaving bars, control of body's moving to the front direction, and lessening the angle of hip-joints at the flying phase is important.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.433-437
• /
• 1988

Direct measurement of the relative position between the end effector of robot and moving objects reduces difficulties caused by the joint encoder reading and transformation. For those purpose, the on-line sensing method using PSD sensor was developed in this paper. The sensor was calibrated on the precision table. Then, the relative position of a moving objects on the conveyor was measured while the robot was tracking the one.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.105-116
• /
• 1995

In this paper, we propose a new a new EOST by using the optical JTC(joint transform correlator) as the feature extraction park, because the JTC can adaptively detect the relative displacements of moving targest. Firstly, we derive the BPEJCT(binary phase extraction JTC) which is a phase type JTC and can remove the intracless correlation peaks of the conventional JTC. Then, especially we hardware construction for driving the BPEJTC in real, and with the Kalman target estimation alogorithm, we carried out a target tracking experiment only to show the possibility of real-time implementation of the EOST.

• Journal of the Korean Data and Information Science Society
• /
• v.6 no.2
• /
• pp.41-50
• /
• 1995

In this paper, an iterative procedure, which detects the location of the outliers and the joint estimates of the outliers effects and the model parameters in the autoregressive moving average model with two types of outliers, is proposed. The performance of the procedure is compared with the one in Chen and Liu(1993) through the Monte Carlo simulation. The proposed procedure is very robust in the sense that applies the procedures to the stationary time series model with any types of outliers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5624-5638
• /
• 2016

A novel method based on Surf points is proposed to detect and lock-track single ground target in aerial videos. Videos captured by moving cameras contain complex motions, which bring difficulty in moving object detection. Our approach contains three parts: moving target template detection, search area estimation and target tracking. Global motion estimation and compensation are first made by grids-sampling Surf points selecting and matching. And then, the single ground target is detected by joint spatial-temporal information processing. The temporal process is made by calculating difference between compensated reference and current image and the spatial process is implementing morphological operations and adaptive binarization. The second part improves KALMAN filter with surf points scale information to predict target position and search area adaptively. Lastly, the local Surf points of target template are matched in this search region to realize target tracking. The long-term tracking is updated following target scaling, occlusion and large deformation. Experimental results show that the algorithm can correctly detect small moving target in dynamic scenes with complex motions. It is robust to vehicle dithering and target scale changing, rotation, especially partial occlusion or temporal complete occlusion. Comparing with traditional algorithms, our method enables real time operation, processing $520{\times}390$ frames at around 15fps.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.57-65
• /
• 1994

A collision-free path planning algorithm between an articulated robot and polyhedral obstacles using configuration space is presented. In configuration space, a robot is treated as a point and obstacles are treated as grown forbidden regions. Hence path planning problem is transformed into moving a point from start position to goal position without entering forbidden regions. For mapping to 3D joint space, slice projection method is used for first revolute joint and inverse kinematics is used for second and third revolute joint considering kinematic characteristics of industrial robot. Also, three projected 2D joint spaces are used in search of collision-free path. A proper example is provided to illustrate the proposed algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.5
• /
• pp.485-497
• /
• 2014

This paper presents the robot vision control schemes based on the Newton-Raphson (N-R) and the Extended Kalman Filter (EKF) methods for the tracking of moving targets. The vision system model used in this study involves the six camera parameters. The difference is that refers to the uncertainty of the camera's orientation and focal length, and refers to the unknown relative position between the camera and the robot. Both N-R and EKF methods are employed towards the estimation of the six camera parameters. Based on the these six parameters estimated using three cameras, the robot's joint angles are computed with respect to the moving targets, using both N-R and EKF methods. The two robot vision control schemes are tested by tracking the moving target experimentally. Given the experimental results, the two robot control schemes are compared in order to evaluate their strengths and weaknesses.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.244-248
• /
• 1996

Nowadays, most shop floors using industrial robots have many problems such as constructing robot workcell, generating robot arm moving trajectory, etc.. In the case of programming robot-arms for a specific task, shop operator commonly use the teach pendant to record the target position and determine the moving trajectory. However, such a teaching process may result in an inefficient trajectory in the sense of moving distance and joint angle fluctuation. Moreover, shop operators who have little knowledge about robot programming process need a lot of learning time and cost. The purpose of this paper is to propose a user friendly robot programming method to program robot-arms easily and efficiently for shop operator so that the programming time is reduced and a short and stable trajectory is obtained.