• Structural Engineering and Mechanics
• /
• 제42권5호
• /
• pp.729-745
• /
• 2012

This study presents dynamic analysis of laminated beams traversed by moving loads using a multilayered beam element based on the first-order shear deformation theory. The present element consists of N layers with different thickness and material property, and has (3N + 7) degrees of freedom corresponding three axial, four transversal, and 3N rotational displacements. Delamination and interfacial slip are not allowed. Comparisons with analytical and/or numerical results available in literature for some illustrative examples are made. Numerical results for natural frequencies, deflections and stresses of laminated beams are given to explain the effect of load speed, lamina layup, and boundary conditions.

• Geomechanics and Engineering
• /
• 제36권2호
• /
• pp.99-109
• /
• 2024

Studying the dynamic behavior of axially moving cylindrical shells in hygro-thermal environments has important theoretical and engineering value for aircraft design. Therefore, in this paper, considering hygro-thermal effect, the nonlinear forced vibration of an axially moving cylindrical shell made of functionally graded materials (FGM) is studied. It is assumed that the material properties vary continuously along the thickness and contain pores. The Donnell thin shell theory is used to derive the motion equations of FGM cylindrical shells with hygro-thermal loads. Under the four sides clamped (CCCC) boundary conditions, the Gallekin method and multi-scale method are used for nonlinear analysis. The effects of power law index, porosity coefficient, temperature rise, moisture concentration, axial velocity, prestress, damping and external excitation amplitude on nonlinear forced vibration are explored through parametric research. It can be found that, the changes in temperature and humidity have a significant effect. Increasing in temperature and humidity will cause the resonance position to shift to the left and increase the resonance amplitude.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.75-83
• /
• 2023

For three-dimensional finite element welding residual stress simulation, several methods are available. Two widely used methods are the moving heat source model using heat flux and the temperature boundary condition model using the temperature profile of the welded beads. However, each model has pros and cons in terms of calculation times and difficulties in determining welding parameters. In this paper, a new method using the moving temperature profile model is proposed to perform efficiently 3-D FE welding residual stress analysis for large structures. Comparison with existing experimental residual stress measurement data of two-pass welding pipe and SNL(Sandia National Laboratories) mock-up canister shows the accuracy and efficiency of the proposed method.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.785-786
• /
• 2005

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.47-48
• /
• 2006

• Korean Journal of Mathematics
• /
• 제12권1호
• /
• pp.91-106
• /
• 2004

We prove the regularity of a moving interface of the solutions of the initial value problem of equation (1.1) is $C^{\infty}$.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권5_6호
• /
• pp.305-320
• /
• 2004

움직임 객체 분할은 내용 기반 응용을 위하여 핵심적인 것이다. 다중 프레임 차이 누적은 프레임 차이 정보를 누적하여 움직임 에지를 검출한다. 검출된 움직임 에지와 분할될 현재 프레임의 에지를 비교하여 움직임 객체 에지를 생성한다. 그러나 실시간 카메라로 입력되는 연속 동영상의 움직임 객체 에지에는 객체 색과 배경 색의 일치 혹은 객체의 움직임 감소로 말미암아 에지 단락이 발생한다. 에지 단락은 매우 심각한 문제로서 움직임 객체의 영상 품질을 심하게 손상시키는 경우도 있다. 본 연구에서는 강건하고 포괄적인 에지 연결 알고리즘을 개발하여 이 문제를 해결하였다. 또한 본 연구에서는 자동 움직임 객체 분할 알고리즘을 개발하여 분명하고 깨끗한 모양의 움직임 객체를 자동으로 분할하였다. 개발한 알고리즘은 CIF 영상을 초당 30 프레임 이상 처리할 수 있다. 본 논문에서 개발한 알고리즘은 MPEG-4 내용 기반 코딩 시스템에 적용할 수 있다.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.805-815
• /
• 2010

This paper studies the influence of internal moving fluid and flow-induced structural instability of multi-wall carbon nanotubes conveying fluid. Detailed results are demonstrated for the variation of natural frequencies with flow velocity, and the flow-induced divergence and flutter instability characteristics of multi-wall carbon nanotubes conveying fluid and modelled as a thin-walled beam are investigated. Effects of various boundary conditions, Van der Waals forces, and non-classical transverse shear and rotary inertia are incorporated in this study. The governing equations and three different boundary conditions are derived through Hamilton's principle. Numerical analysis is performed by using extended Galerkin's method which enables us to obtain more exact solutions compared with conventional Galerkin's method. This paper also presents the comparison between the characteristics of single-wall and multi-wall carbon nanotubes considering the effect of van der Waals forces. Variations of critical flow velocity for different boundary conditions of two-wall carbon nanotubes are investigated and pertinent conclusion is outlined.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.204-211
• /
• 1993

Laplace 방정식을 Green 공식으로 해석한 경계요소법을 이용하여 수치수조에서 비선형파를 재현하였다. 미지수는 유체영역의 경계에 설정한 각 절점에서의 속도포텐셜과 수면변위이며 이를 구하기 위하여 지배방정식과 자유수면 경계조건을 기본식으로 하는 연립 1차방정식을 구성하였다. 동력학적 자유수면 경계조건에서 속도의 제곱항을 고려하였으며 자유수면 경계에서 속도포텐셜의 연직변화를 고려하여 이의 시간미분을 계산하였다. 본 수치모델을 이용하여 고립파와 Stokes의 2차 파낭을 재현한 결과, 이론치와 매우 잘 일치함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제44권4호
• /
• pp.521-538
• /
• 2012

In this study, the transverse vibrations of an axially moving flexible beams resting on multiple supports are investigated. The time-dependent velocity is assumed to vary harmonically about a constant mean velocity. Simple-simple, fixed-fixed, simple-simple-simple and fixed-simple-fixed boundary conditions are considered. The equation of motion becomes independent from geometry and material properties and boundary conditions, since equation is expressed in terms of dimensionless quantities. Then the equation is obtained by assuming small flexural rigidity. For this case, the fourth order spatial derivative multiplies a small parameter; the mathematical model converts to a boundary layer type of problem. Perturbation techniques (The Method of Multiple Scales and The Method of Matched Asymptotic Expansions) are applied to the equation of motion to obtain approximate analytical solutions. Outer expansion solution is obtained by using MMS (The Method of Multiple Scales) and it is observed that this solution does not satisfy the boundary conditions for moment and incline. In order to eliminate this problem, inner solutions are obtained by employing a second expansion near the both ends of the flexible beam. Then the outer and the inner expansion solutions are combined to obtain composite solution which approximately satisfying all the boundary conditions. Effects of axial speed and flexural rigidity on first and second natural frequency of system are investigated. And obtained results are compared with older studies.