• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.289-308
• /
• 1988

The center of resistance is a important determining factor of tooth movement pattern. Laser speckle interferometry, recently developed for noninvasive measurement of small displacements (microns), was used to detect the center of resistance of a maxillary canine which has normal tooth axis and distal curved root in dry human skull. Laser holographic interferometry was used to verify the results of laser speckle interferometry The following result were obtained; 1. In measurement of the degree of rotation, center of resistance was localized when the traction line passed 4.4/18.0 level from alveola crest to root apex. 2. In measurement of the degree of tipping, center of resistance was localized when the traction line passed 4.6/18.0 level from alveola crest to root apex. 3. In holographic determination, the center of resistance was observed when the traction line passed between 3mm to 6mm level from alveola crest to root apex, therefore the results using laser speckle interferometry was coincided with holographic results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.315-318
• /
• 1996

In this paper a new positioning method for cylindrical work pieces on rotating supports is studied. A work piece on a rotating axis is positioned by an impact drive mechanism (IDM) whose driving parameters are steadily updated by observing the object movement. The application of this actuator and the use of a multi-functional PC board for all necessary input and output operations such as e.g. data acquisition or wave form generation allow an alignment with a precision of less than 1.mu.m in a relatively short time and at low cost compared to conventional methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.52-56
• /
• 2004

Unmanned Aerial Vehicles (UAVs) are remotely piloted or self-piloted aircraft by inputted program in advance or artificial intelligence. In this study Aileron and Elevator are used to control the movement of airplane for horizontal and vertical flights about its longitudinal and lateral axis. In an introduction, the drone was linearly modeled by extracting aerodynamic parameter through flight test and simulation, lift and drag coefficient corresponding to angle of attack, changes of pitching moment coefficient. In the main subject, the flight simulation was performed after constructing hardware using TMS320F2812 from TI company and PID with lateral and longitudinal controller for horizontal and vertical flights. Flying characteristics of two system were estimated and compared through real flight test with hardware equipped algorithm and adaptive algorithm that was applied to consider external factors such as turbulence. In conclusion the control performance of the controller with proposed algorithm was streamlined at lateral and longitudinal controller respectively, we will discuss guidance command to pass way point.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.76-84
• /
• 2017

This paper presents an efficient method for generating spatiotemporal images in order to detect leukocyte motion in microvessels. Leveraging the constraint that leukocytes move along the contour line of the blood vessel wall, our proposed method efficiently generates spatiotemporal images for leukocyte motion detection. To that end, translational motion caused by in vivo movement is first removed by a template matching method. Second, the blood vessel region is detected by an automatic threshold selection method in order to binarize temporal variance images. Then, the contour of the blood vessel wall is expressed via B-spline function. Finally, using the detected blood vessel wall's contour as an initial curve, the plasma layer for the most accurate position is determined in order to find the spatial axis via snake, and the spatiotemporal images are generated. Experimental results show that the spatiotemporal images are generated effectively through comparison of each step with three images.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.652-658
• /
• 2004

In this paper, we report the numerical and experimental solutions of the axi-symmetric flows in the axial plane driven by an impingement of fluid from the bottom wall of a circular cylinder. We managed to visualize successfully the flow pattern shown on the vertical plane through the container axis. The numerical results are shown to compare well with the experimental results for the case of infinity Rossby number. The satisfactory agreement between the two results was possible when in the numerics the free surface was treated as a solid wall so that a no-slip condition was applied on the surface. The numerical solutions reveal that inertial oscillation plays an important role at small Rossby numbers, or at a larger background rotation.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2009

Arytenoid motion has long been recognized as complex. Misunderstandings about the specifics of arytenoid motion remain prevalent. The resultant misunderstandings have led to erroneous or suboptimal clinical approaches to the treatment of vocal fold immobility. A thorough understanding of the anatomy of the arytenoid and cricoid cartilages, the cricoarytenoid joint, and related ligaments, muscles, and other structures is essential in order to fully understand laryngeal motion disorders. Arytenoid motion occurs in three directions. Movements involving a change anteriorly and posteriorly, as well as vertically, are due to the revolving or pitchlike motion of the arytenoid along the minor axis of the cricoid's elliptically shaped facet. The medial and lateral movements are due to the orientation of the arytenoid which in turn is determined by the forward, lateral, and inferior inclination of the cricoid-arytenoid facet. During adduction it is the outward angulation of the vocal process from the body of the arytenoid that allows the entire length of the vocal proceses to approximate one another and to have this meeting occur at the proper vertical height.

• Tunnel and Underground Space
• /
• v.7 no.4
• /
• pp.299-309
• /
• 1997

Soil and rock improvement and reinforcement techniques are applied to achieve safe tunnel excavation in difficult geological conditions. The Umbrella Arch Method(UAM), one of the auxiliary techniques, is used to reduce ground permeability and improve stabtility of the tunnel by inserting a series of steel pipes into ground around the crown inclined to the longitudinal axis of the tunnel. Additionally, multi-step grouting is added through the steel pipes. UAM combines the advantages of a modern forepoling system with the grouting injection method. This technique has been applied in subway, road and utility tunneling sites for the last few years in Korea. This paper presents the results of analysis of the case studies on ground movements associated with UAM used in the Seoul Subway line 5 constructon site. Improvement of tunnel stability and decrease of ground settlement expected with pipe insertion are also discussed. Finally, the method to minimize ground settlements caused by NATM tunnelling are suggested.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.19-25
• /
• 1999

The research has extracted two kinds of specimen, one is rolling direction material(R-material) and the other rectangular of rolling direction(V-material), from Al alloy 7075 rolled. We have come to a conclusion by measuring crack propagation behavior with movement type microscope and Replica. 1) R-material shows 130% higher, approx. 39.2MPa in fatigue strength than V-material, approx. 29.4MPa. 2) In crack proportion, contrary to V-material growing directly toward specimen axis, R-material grows neared to shear direction. 3) The life proves that R-material is approx. 122% higher than V-material at 43.1MPa and approx. 135% higher at 47MPa. 4) The correlation between fatigue crack length and fracture life ratio applied to 'log(2a)=A+B ($N/N_f$)'equation shows inappropriate, because property value of Al alloy is low and the difference of chemical composition is high comparing with steel material.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.1
• /
• pp.35-42
• /
• 1990

The area where age dating of the seafloor and interpretation of geomagnetic basic structure are conducted is also important in the aspect of geophysics. Near the sea mount (water depth to the top is 3900m and 6500m to the bottom), there are Mesozoic magnetic lineations at the sea-side flank along the trench axis. A two dimensional model analysis of Talwani and Heirtzler(1964) and a three dimensional model analysis of Talwani are performed by using data obtained from the marine proton magnetometer. Distribution, direction of the lineation, amplitude and period of magnetic anomaly are correlated and analysed with speed of the plate movement and lineation of the sea mount. In the west and north-west Pacific there are lots of huge sea mounts retaining the history of oceanic crust. This indicates that geomagnetic basis subsided into the oceanic crust and has interest in the aspects of the isostasy theory of the gravity.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2320-2322
• /
• 1999

This paper was studied on the surface discharge characteristics and tracking phenomena on the solid insulator in liquid nitrogen ($LN_2$) at atmospheric pressure. In order to investigate the bubbles which have much influence on electric surface discharge in liquid nitrogen, Knife type electrode and plane electrode were arranged in different modes(Mode A, Mode B, and Mode C) and investigated for surface discharge and tracking phenomena. In Mode A, by the movement of bubbles tracking damage was formed under the electrodes. The tracking pattern in Mode B was formed along the electrode axis.