• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.189-196
• /
• 2015

As the number of children's libraries has increased in Korea, it has been discussed to improve the quality of design in the libraries. In a reading room of children's library, spatial consideration should be focused on the children under 10 years old since they are in important points to learn Hangul and to develop reading habits. This study is aimed to examine the characteristics of a floor-sitting reading room, where children can feel like a home, stay in clean and safe and play while reading. The seven case studies of floor-sitting reading rooms are analyzed from the viewpoint of each factor of physical environment, including structure, furniture, and decoration. The following is the summary of findings of this study. First, floor-sitting reading rooms tend to compose main reading areas around bookshelves. Reading areas create the characters by changing floor levels and arranging furniture associated with windows, columns, and wall-type bookshelves. In the reading areas, movable low-level tables are frequently placed for flexible space uses, and seats for reading tend to put together with fixed bookshelves. Second, the central areas of the reading rooms are often shaped in the forms of pods, storytelling areas, sculptures, and unique furniture. Especially storytelling areas and pods play the cores of the reading rooms with the varying steps of floors and pictorial graphics on walls. Third, decoration elements in the reading rooms are designed with graphics, visual displays, and sculptural decorations. In my case studies, spatial elements such as reading nooks, attics, tunnels, and shelters are not often found in the floor-sitting reading rooms even though children like to have them. Since it is the advantage of floor-sitting reading rooms where children can take off shoes and act freely, we should look for the design of such spatial elements in the floor-sitting reading rooms.

• 한국콘텐츠학회논문지
• /
• 제8권6호
• /
• pp.8-15
• /
• 2008

본 논문에서는 광 마이크로폰의 주파수 응답특성 분석을 위해 시스템을 제안하고 구현하였다. 현재 사용되어지고 있는 캐패시턴스 마이크로폰과 광섬유 전송로형 광 마이크로폰(FOM)은 낮은 지향성과 크기, 무게, 비싼 가격 등에서 단점을 나타내고 있다. 반면 제안된 광 마이크로폰은 저가의 소자로 구성할 수 있으며, 소형, 경량화, 높은 지향성 등의 장점을 갖는다. 본 논문에서 제안하는 광 마이크로폰의 헤드 부는 인가된 음압에 따라서 전후로 움직이게 되어있으며, 반사판이 부착되어 있는 형태로 구성되어 있다. 광 헤드와 진동판사이의 거리를 변화시켜가며 응답특성을 측정하여 선형성과 민감도가 최대인 지점을 동작 점으로 결정하였다. 컴퓨터 기반 음향 측정/분석 프로그램인 Smaart Live와 USBPre를 사용하여 음향 신호의 주파수를 변화시켜 가며 구현한 광 마이크로폰의 광전 변환된 신호의 출력을 측정하였으며, 기존의 캐패시턴스 마이크로폰과 비교 분석하였다. 측정된 광 마이크로폰은 비교 콘덴서 마이크로폰과 거의 동일한 출력 특성을 나타내었으며, 주파수 대역폭은 약 ${\pm}3$[dB] 이내에서 300[Hz]-3[kHz] 정도의 성능을 나타내었다.

• 한국도서관정보학회지
• /
• 제36권2호
• /
• pp.13-30
• /
• 2005

이 연구는 조선시대에 간행되었던 $\lceil$사서$\rfloor$의 하나인 한문본 대학 제판본에 관한 형태서지적 분석이다. 국내 여러 기관 및 개인이 소장하고 있는 한문본 대학 판본을 조사하여, 그 형태적 특성을 분석하고. 이를 토대로 한문본 대학 판본 중에서 가장 많이 간행되었던 $\lceil$대학장구대전$\rfloor$의 계통별 체계화를 시도하였다. 연구결과, 한문본 대학은 한성지역의 중앙관서와 경상감영에서 주로 간행하였고, 시기적으로는 $17\~19$세기에 가장 많이 간행되었던 특징을 보이고 있다. 특히 $\lceil$대학장구대전$\rfloor$의 경우 명나라 호광(胡廣) 등이 편찬한 $\lceil$사서오경대전$\rfloor$을 저본으로 하여 이를 복각한 '명본복각계열'과 조선에서 주조한 활자로 간행한 '활자본계열'로 판본의 계통이 형성되어 있음이 밝혀졌다.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.709-715
• /
• 2011

Chattering in cutting operations are usually a cumbersome part of the manufacturing process in mechanical. Particular, machining performance such as that of the boring process is limited by cutting condition at the movable components. Among various sources of chatter vibration, detrimental point in cutting condition is found a mechanical condition on overhang. It limits cutting speed, depth, surface roughness and tool wear failure as result because the all properties are varying with the metal removal process. In this case, we have to observe the resonance frequencies of a boring bar for continuous cutting. In the established research, boring bar vibration of cutting system has been measured with the aid of accelerometer. However, the inherent parameters of internal turning operations are severely limit for the real time monitoring on accelerometers. At this point, this paper is proposed other method for real time monitoring during continuous cutting with optical fiber at the inside of boring bar. This method has been used a plastic fiber in the special jig on boring bar by based on experimental modal analysis. In this study, improvement of monitoring system on continuous internal cutting was attempted using optical fiber sensor of inside type because usually chattering is investigated experimentally measuring the variation in chip thickness. It is demonstrated that the optical fiber sensor is possibility to measure of chattering with real time in boring process.

• 한국가구학회지
• /
• 제22권3호
• /
• pp.190-198
• /
• 2011

This study intended to present a new direction of differentiated and innovative furniture design for small living space overcoming the uniformity of conventional small living. In order to achieve these goals, a new piece of furniture with multi functions useful for such small space has been designed and explained in this study. This new type multi-functional furniture can be utilized as kitchen, dining table, home bar or office stand depending on the user's necessity. In particular, it provides more adaptability to changing life and spatial availabilities for small living space in terms of space division, separation and fusion features. Based on the needs of small living space brought by social changes, the conventional concept of small living space, which divides space by partitions or walls, should be changed into flexible perception of space. Also, this research proposed the features of furniture design for functional shifts in terms of its functional, structural, and systematical aspects. In this respect, space can be regarded as a variable place and the image of space can be differently appreciated by means of shift, functional transition and mobility. That is, small living space can be perceived as kitchen, living space or working space at the same time. In conclusion, the versatile use of limited space can be a solution to the issues related to small living space; the convertible and movable furniture called F4 Island presented in this study can transform such spatially limited space into a space with multiple functions to meet the requirements of its residents.

• 디자인학연구
• /
• 제11권1호
• /
• pp.245-258
• /
• 1998

과학기술의 발달과 생활양식의 변화로 인해 주택의 역할은 가족구성원들을 위한 생활공간 뿐 아니라 사무실을 대신하는 업무공간으로 확장되고 있으며, 그에 따라 업무에 필요한 기기나 물품들은 편리하게 사용하고 수납하기 위한 재택 근무가구의 수요도 증가하고 있다. 이 연구에서는 선행 개발된 재택 근무 공간 및 가구에 대한 지침과 연구결과를 바탕으로 하여, 기능적인 측면에서는 편리하고 효율적인 작업이 가능하고 형태적인 측면에서는 주택이라는 특성에 부합하는 다음과 같은 가구의 디자인을 개발하였다. 1. 패널부착형 조합가구 : 가변성과 확장성을 기본개념으로 하여 원하는 형태와 크기의 unit를 다양하게 조합할 수 있는 시스템 가구 2. 캐비넷 형 워크스테이션 : 하나의 가구에 재택 무에 필요한 기능을 집약시켜 최소한의 공간으로 최대의 효율성을 추구하는 가구 3. 이동식 다목적 가구 : 간단한 작업이나 보조기능을 위한 이동성이 뛰어난 가구 재택 근무는 시간과 공간의 효율성으로 인해 미래의 업무 형태로 발전될 가능성이 크며, 따라서 보다 다양한 기능과 형태를 지니는 디자인의 지속적인 개발이 요구된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.382-382
• /
• 2018

최근 기후변화 및 도시화로 인해 집중호우와 도시 내의 불투수층이 증가하고 있으며, 현재 도심의 강우관리시스템이 한계에 달하여 수재해 피해가 급증하고 있다. 이와 같은 문제를 해결하기 위한 방안으로 저영향개발 기법이 대두되고 있으며, 본 기법은 해당 지역의 강우를 분산식 빗물처리 하여 도시 내의 수문학적 특성을 개발이전 상태로 회복 및 유지하는 기술이다. 저영향개발 기법의 종류는 투수성 포장, 옥상녹화, 빗물정원, 식생저류지, 식생화분 등이 있다. 본 연구에서는 저영향개발 기법 중 하나인 투수성 아스팔트에 대한 우수저감 효과를 분석하기 위해 경상남도 양산시 부산대학교 양산캠퍼스 그린인프라 저영향개발 센터에서 주차장형 LID 시설의 투수성 아스팔트 포장과 대조군인 불투수 콘크리트 포장을 실험대상으로 선정하였다. 포장체는 $10.85m(L){\times}2.3m(B){\times}0.9 m(H)$의 크기로 원지반 침투가 없는 박스형 실험시설로써 이동형 강우모의장치를 이용하여 인공강우실험을 실시하였다. 강우모의 시에 발생하는 지표유출 및 침투유출은 각 유공관을 통해 모니터링 박스에 차집되어 실시간으로 웹사이트 상에 저장된다. 저장된 자료를 이용하여 투수성아스팔트의 첨두유출량 저감, 지체시간지연효과를 분석하였다. 분석된 결과를 통해 첨두유출량은 11%저감되었고 투수성 아스팔트와 불투수 콘크리트는 각각 3시간, 1시간 동안 유출되어 2시간의 차이를 보여준다.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.461-472
• /
• 2021

Objectives: This study was conducted to determine the differences in EC concentrations according to the type of sampler by measuring and analyzing EC. Methods: Elemental carbon was measured in diesel engine vehicles and at the roadside. Using NIOSH method 5040, a cassette was coupled to 37 mm and 27 mm quartz filters and measurements were performed 21 times. There were 14 types of measurement methods, and polystyrene, polypropylene, and metal samplers were evenly placed inside the movable chamber. Results: The results measured using the 37 mm conductive cassette (closed/open) and the IOM sampler made of conductive materials showed a higher ratio than the other results. When the 37 mm conductive cassette was measured with the lid open, it showed a statistically significantly higher ratio than with other measurement methods (p<0.05). Conclusions: Checking the EC concentration a total of 21 times at each ratio based on the concentration of the 3-stage polystyrene cassette, it was statistically significantly higher when the 37 mm conductive cassette was open. This same cassette also showed a slightly higher EC concentration when closed. It was ascertained that some DEE was collected on the cassette wall surface due to the electrical conductivity of the polystyrene cassette, resulting in sample loss. Since EC is composed of fine particles, it is thought that electrical conductivity may affect its concentration.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.56-63
• /
• 2023

In this study, the vibration signal of the mold was measured and analyzed to monitor the process information and characteristics during the press molding process. A necklace-type picture frame mold was used for press molding, and the vibration signal was measured by GY-61 acceleration sensor module attached to the surface of the upper (movable) mold base. The change of the vibration signal of the mold according to press speed was analyzed. As a result, the vibration signal had a large change at five sections: "Holder contact", "Punch contact and start of pressing", "End of pressing", "Mold open", and "Demolding". The time difference between "Punch contact and start of pressing" and "End of pressing" means the pressing time which is the actual time the material is molded under pressing pressure. The time intervals for each section, represented by the time interval between "Holder contact" and "Punch contact and start of pressing", can be used to compare and evaluate the press speed applied to the process. By comparing the vibration signals at 60 rpm and 90 rpm, the amplitude at the section of "Punch contact and start of pressing" increased as the press speed increased. This result means that as the press speed increases, more force and pressure is applied to the material. Also, the peak values of the other sections were found to increase as the press speed increased. It was found that the pressing time, the time interval between "Punch contact and start of pressing" and "End of pressing", decreases as the pressing speed increases. Similarly, press speed factor, the time interval between "Holder contact", and "Punch contact and start of pressing", is found to be shorter. Therefore, based on the result of this study, the pressing time, press speed, pressing(punching) pressure of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process information and characterization can be evaluated as the change of the mold vibration during press molding.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.