• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.129-135
• /
• 2011

Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has the centrifugal roller and a ramp plate in the flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study ball type is proposed instead of roller type of movable flange to resolve claim. Also experiments are carried out for new model to evaluate performances.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.85-90
• /
• 2013

Dry CVT consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study ball type is proposed instead of roller type of movable flange to resolve the claim. Simulation is carried out for new model to verificate performance, experiments are carried out for new model to evaluate performances.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.823-829
• /
• 2005

The extent of slack is correlative with the wheelbase of vehicle as well as the distance between the inner faces of flanges. Since the movable clearance of wheel flange is getting reduced in curved track, the vehicle is more difficult to negotiate the track. By this reason, a certain extent of slack is normally designed for curved track to allow the movable clearance corresponding to that of straight track. In case of some foreign railways,. the fixed extent of slack has been classified by the ranges of curve radius. In case of KNR, the slack is calculated by a formula for each case of curve radius and it therefore seems quite precise method. However, since there is a wide range of slack adjustment $(S'=0\~15mm)$ in calculation formula itself, too excessive or too little slack can be calculated. This study is to approach the technical review on slack calculation and to offer the reasonable slack design through the full-scale experiment at sharp curved track without slack.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.59-64
• /
• 2003

Continuously Variable Transmission (CVT) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The main advantages of the U with V-belt, which has been Popular in Asia, are a simple mechanism less maintenance and low cost. One of the important factors which have an influence on the performance of the CVT is change of axial distance. Base on an experiment the effects of transfer torque and speed ratio of both driving pulley and driven pulley during the alteration of axial distance were studied.

• 한국강구조학회 논문집
• /
• 제23권3호
• /
• pp.283-294
• /
• 2011

강재 거더교의 다이아프램과 상 하부 플랜지에 부착된 온도게이지의 값을 측정하여, 온도 분포와 시간적 변화를 검토하고, 도로교 설계기준과 비교하였다. 또한 측정 자료를 기초로 하여 일일 기온, 일 최고기온, 일 최저기온에 대한 교량 부재온도와의 상관관계를 각각 분석하여 회귀분석식과 신뢰도를 나타내는 상관계수를 산정하였다. 구조해석에서는 대상교량을 3차원 전체모델링을 수행하고, 실제의 온도 측정 자료를 기반으로 한 온도 하중을 부과하여 계산된 온도 응력값과 시방 규정상의 온도하중에 의한 단면력을 서로 비교 분석한다. 본 연구에서 구해진 대기 온도분포와 강교량 부재 온도 상관관계로부터 상하 플랜지의 온도차를 예측할 수 있고 이 결과를 이용하면 설계 시 신뢰성 있는 부재의 온도하중을 산정할 수 있어, 추후 강합성교량의 온도 영향 평가에 있어서 기초적 자료가 될 것이라 기대한다.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.73-80
• /
• 2006

The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important factors which have an influence on the performance of the CVT are the weight of the centrifugal roller, the change of axial distance and spring force. Based on an experiment, the effects of load torque, speed ratio, and revolution of both the driving pulley and the driven pulley during the alteration of the axial distance, roller weight and spring constant were studied.