• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.900-906
• /
• 2010

This note proposes vibration-free motor control through modified LQG/LTR methodology. A conventional LQG/LTR method is a design tool in the frequency domain. However, unlike the conventional one, the proposed one is a time response based design method. This feature is firstly designed by parameterized settling time control gain through the target loop design procedure and the feature is secondly realized by loop transfer recovery. In order to show convergence to the target loop transfer functions, asymptotic behaviors of the open and the closed loop transfer functions are shown. At the conclusion, it is verified that the proposed method is robustly stable to parametric uncertainties through ${\mu}$-plot.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1196-1203
• /
• 2011

Statistical optimum methodology of table of orthogonal array, ANOM, ANOVA and RSM are applied to formulate optimum allocation design with design variables. It can be minimized average SPL of control volume, the objective function in closed system by optimal allocated positions of absorbing material. Structural natural frequency and acoustic natural frequency of cavity are analyzed by FEM and BEM in the closed system. Using BEM, average SPL of specific control volume is calculated according to the condition before using absorbing material and after using it. It is shown that noise is reduced by $5.02dB_{RMS}$ by absorbing material located at optimal position and minimum $1.83dB_{RMS}$ and maximum $3.47dB_{RMS}$ by the table of orthogonal array.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.546-551
• /
• 2013

This paper deals with the optimum design of the stator and rotor shape of the interior permanent magnet synchronous motors (IPMSM) that are used in applications for automobiles. IPMSMs have the following advantages: high power, high torque, high efficiency, etc. However, cogging torque which causes noise and vibrations is generated at the same time. The optimum design of shape of a IPMSM was carried out with the aim of reducing cogging torque. Six variables which affect to the performance of a IPMSM are chosen. The main effect variables were determined and applied to the response surface methodology (RSM). When compared to the initial model using the finite elements method (FEM), the optimum model highly reduces the cogging torque and improves the total harmonics distortion (THD) of the back-electro motive force (EMF). A prototype of the designed model was manufactured and experimented on to verify the feasibility of the IPMSM.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.97-102
• /
• 2001

This paper is concerned with optimal design of a linear DC motor which is steading fast in OA and FA systems due to simplicity in structure high-speed operation and high-precision positioning. The approach is based on the statistic method. In this study, firstly, we determine factors that affect significantly the objective function using 2-level factorial design. And then the Response Surface Methodology was app1ied to optimize these factors. Through this application design factors could be optimized within a short term and low experimental cost.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1842-1850
• /
• 2017

Reducing the noise and vibration of the BLDC motors is very essential for some special applications. In this paper, a new structural design is introduced to increase the natural frequencies of the stator in BLDC motors as increasing the natural frequencies can reduce the severe effects of the structural resonances, including high levels of noise and vibration. The design is based on placing a single hole on definite regions at the stator cross sectional area (each region contains one tooth and its upper parts in the stator yoke) in an optimum way by which the natural frequencies at different modes are shifted to the higher values. The optimum diameter and locations for the holes are extracted by the Response Surface Methodology (RSM) and the modal analyses in the iterative process are done by Finite Element Method (FEM). Moreover, the motor performance by the optimum stator structure is analyzed by FEM and compared with the prototype motor. Preventing the stator magnetic saturation and the motor cogging torque enhancement are the two constraints of the optimization problem. The optimal structural design method is applied experimentally and the validity of the design method is confirmed by the simulated and experimental results.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.18-21
• /
• 2004

This paper presents the optimization for shape design of a field coil used High Temperature Superconducting Motor (HTSM). In materials of HTSM, critical current Ic is more sensitive to magnetic fields directed along the axis or the unit cell ($B_{\bot}$). Thus, in the shape design of the HTS magnet. the maximum $B_{\bot}$ should be reduced to limit Ic. In order to reduce the maximum $B_{\bot}$, the shape optimization of the magnet, which is used for the field coil of HTSM, is necessary. It can be accomplished by using Response Surface Methodology (RSM). Finally, the result of RSM is verified by comparison with these experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1536-1545
• /
• 2008

In this paper, we research a new method for efficiency improvement of a single-phase Induction motor by minimization of the stator loss. To make this, we perform winding design which is based on balanced and quasi-balanced operation condition. It gives efficiency improvement greatly but poor starting torque simultaneously. To obtain the best efficiency improvement maintaining the maximum and starting torque, the optimal winding specification and rotor dimension is determined with variation of secondary resistance, running capacitor and turn ratio. Finally, this paper gives the comparison between the simulation results and experimental results.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.365-369
• /
• 2002

In this paper, DC motor controller has been designed by using SoC. SoC is short for System on a chip. This is a methodology that both a processor and some applications are integrated in a chip. In order to design this system based on SoC, PIC 16C57 has been selected as a processor because it has not too many instruction sets and simple data path named a harvard structure. And motor control module has been programmed by using VHDL. The advantages of the design based on SoC are as follows: simple structure, high speed working, easily verifying and simulating the system.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.2
• /
• pp.15-19
• /
• 2022

Purpose: This pilot study aimed to clarify features of motor module during walking in exercise experts who experienced lately repeated training for sports skill. To identify motor modules, autoencoder machine learning algorithm was used, and modules were extracted from muscle activities of lower extremities. Research design, data and methodology: A total of 10 university students were participated. 5 students did not experience any sports training before, and 5 students did experience sports training more than 5 years. Eight muscle activities of dominant lower extremity were measured. After modules were extracted by autoencoder, the numbers of modules and spatial muscle weight values were compared between two groups. Results: There was no significant difference in the minimal number of motor modules that explain more than 90% of original data between groups. However, in similarity analysis, three motor modules were shown high similarity (r>0.8) while one module was shown low similarity (r<0.5). Conclusions: This study found not only common motor modules between exercise novice and expert during walking, but also found that a specific motor module, which would be associated with high motor control ability to distinguish the level of motor performance in the field of sports.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.623-627
• /
• 2006

This paper deals with the optimum rotor design solution on torque ripple reduction for a SynRM with concentrated winding using response surface methodology (RSM). The RSM has been achieved to use the experimental design method in combination with finite element method (FEM)and well adapted to make analytical model for a complex problem considering a lot of interaction of design variables. Comparisons are given with characteristics of a SynRM according to flux barrier number, flux barrier width variation, respectively.