• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.34-38
• /
• 1991

This paper describes and discusses the employment of EMG pattern analysis to provide upper-motor-neuron paraplegics with patient-responsive control of FES (functional electrical stimulation) for the purpose of walker-supported walking. The use of above - lesion EMG signals as a solution to the control problem is considered. The AR (autoregressive) parameters are identified by Kalman filter algorithm using DSP chip and classified by fuzzy theory. The control and stimuli part of the below-lesion are based on microprocessor(8031). The designed stimulator is a 4-channel version. The experiments described above have only attempted to discriminate between standing function and sit-down function. A further advantage of the this system is applied for motor rehabilitation of social readaption of paralyzed humans.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1960_1961
• /
• 2009

본 논문에서는 PID, PWM, HSC, 컴퓨터와의 호스트 통신, 외부 DAC 인터페이스를 FPGA만을 이용하여 하나의 Chip에 구현하고 DC 서보 모터의 속도를 설정한 제어 상태로 안정화시킬 수 있는 시스템을 구현하고자 한다. 컴퓨터에서 설정한 설정치(SV)와 P, I, D의 이득 값을 호스트 통신으로 데이터 블록은 해당 블록으로 전달하며 DC 서보 모터의 엔코더에서 나오는 $90^{\circ}$ 위상차가 있는 2채널의 펄스는 HSC 블록을 거쳐 프로세스치(PV)를 생성 고 이로부터 얻어진 SV와 PV의 편차(E)를 산출한 후 PID 제어 동작을 수행한다. 그 결과인 조작치(MV)를 PWM 블록에 제공하여 실질적으로 DC 서보 모터를 구동하는 H-bridge 회로를 구동한다. 또한 FPGA 내부의 SV, PV, E, MV를 오실로스코프로 계측하기 위해 DAC 인터페이스 블록을 첨가 하여 외부 디지털 아날로그 변환기(DAC)를 제어 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.564-567
• /
• 2005

For the application of monitoring system of the machine tool to industry, the requirements such as high reliability and low cost need to be satisfied. In this study, a reliable but inexpensive monitoring method for machine tool is introduced. To improve the monitoring reliability, several kinds of information related to machining and operation are selected; real-time video clip from USB camera, operation data and signal from CNC and feed motor torque. Especially, to improve the quality of real-time video clip, a camera housing is developed, it can significantly reduce the vibration effect and prevent from coolant and chip. The collected information are transferred to the monitoring terminals in remote sites using OPC and TCP/IP protocol over Ethernet, which give us convenience of development and interoperability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.140-142
• /
• 2008

Thrust ripples in Permanent Magnet Linear Motor(PMLSM) are mainly generated by cogging force. Cogging force caused by the interaction between the iron core and the Permanent Magnet(PM), and end effect. This paper has proposed a control method for thrust ripples suppression and design of one-chip proceeding digital controller using TMS320LF2407. This control method is realized by Field Oriented Control(FOC) adding to current compensation. The effectiveness of proposed control method is verified by experimentation comparing between the compensation and non-compensation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1025-1028
• /
• 1993

In this paper, an intelligent control scheme with multi-stage fuzzy inference is developed for a myoelectric prosthesis to achieve natural control with tactile feedback based on fuzzy control strategies. Strain gauges and a potentiometer are added to the prosthesis for tactile feedback with a PWM motor driver developed to save the battery power. According to the multi-stage fuzzy inference, the prosthesis can determine the stiffness of the object and hold an object without injuring it, meanwhile, the hysteresis phenomenon is an 80196KC single-chip microcontroller to replace the original controller.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.77-80
• /
• 1989

This paper describes a study on the locomotion control system for a indoor-use mobile wheelchair. Three lode of operations - BASIC, AUTOMATIC and PROGRAMMED - are employed as basic algorithm building block. One-chip microcomputer 8031 is dominating the control of actuation part and it can control the range of rotating speed of the wheel both right and left by servo motor. Keyboard is employed as a command input device. This system is intended to improve the daily life of the disabled by the intelligent interactive operation scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.153-154
• /
• 2006

Development of sorting machine for photo diode and its control system is addressed. The sorting machine for optical communication device requires high positional precision because the alignment is one of the most important point in the sorting process. This sorting method describes how to detect the target chip's angle and position from the wafer. The machine vision system is used for the feedback control. This sorting machine is implemented by motion controller, machine vision and various solenoid valve and is interfaced with RS-232c, GPIB and PCI communication. This system gets the position accuracy within $1{\mu}m$ with our experiments.

• 전자공학회논문지SC
• /
• 제40권4호
• /
• pp.225-234
• /
• 2003

터보 압축기는 구조적으로 임펠러를 고속회전 시켜야한다. 범용전동기에 높은 기어비를 가진 기어박스를 이용하여 구현하였는데, 이는 관성 모멘트, 마찰손 및 압축기의 크기를 증가시켰다. 최근 터보 압축기의 연구는 초고속 동기전동기를 장착하고 있고 기어박스를 제거하여 크기와 마찰손을 최소화하는 방향으로 진행되고 있다. 본 연구에서는 150마력 70,000rpm 직접 구동방식의 터보 압축기를 개발하기 위하여 초고속 동기전동기용 인버터제어기, 공압제어기 및 MMI 기능을 통합한 단일 DSP(Digital Signal Processor) 구조의 통합제어기를 구현하였다. 이는 하드웨어적인 부분만 아니라 소프트웨어적인 측면에서도 역시 통합 작업이 필요하였다. 이러한 통합으로 하드웨어적으로는 제어 시스템이 간략화 되었으며, 소프트웨어적으로도 동일한 개발환경에서 각 제어기가 구현되고 통합되었다. 이를 개발 및 제작하여 150마력 70,000rpm 직접 구동 방식의 터보 압축기에 적용하였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.299-308
• /
• 1998

본 논문에서는 신뢰할 수 있는 SRM 구동시스템과 기존의 PI제어기에 4개의 규칙으로 이루어진 FLM(Fuzzy Logic Modifier)를 제안하였다. 저가격 원칩 마이크로컨트롤러인 인텔사의 i80C196KC는 속도 제어기와 초기 기동을 포함한 SRM 구동 컨트롤러를 설계하기 위해 사용되었다. 폐루프 시스템에 안정된 효과를 보이는 FLM을 Pl 제어기에 추가함으로써 부적절하게 설정된 PI 제어기의 이득값에 대해 강인한 제어성능을 보인다. 시뮬레이션 및 실험결과는 6/4극 SRM에 대해 제안된 제어 방식이 우수함을 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1439-1444
• /
• 2005

Induction motors are the most commonly used electrical drives because they are rugged, mechanically simple, adaptable to widely different operating conditions, and simple to control. The most common faults in squirrel-cage induction motors are bearing, stator and rotor faults. Surveys conducted by the IEEE and EPRI show that the most common fault in induction motor is bearing failure (${\sim}$40% of failure). Thence, this paper addresses experimental results for diagnosing faults with different rolling element bearing damage via motor current spectral analysis. Rolling element bearings generally consist of two rings, an inner and outer, between which a set of balls or rollers rotate in raceways. We set the experimental test bed to detect the rolling-element bearing misalignment of 3 type induction motors with normal condition bearing system, shaft deflection system by external force and a hole drilled through the outer race of the shaft end bearing of the four pole test motor. This paper takes the initial step of investigating the efficacy of current monitoring for bearing fault detection by incipient bearing failure. The failure modes are reviewed and the characteristics of bearing frequency associated with the physical construction of the bearings are defined. The effects on the stator current spectrum are described and related frequencies are also determined. This is an important result in the formulation of a fault detection scheme that monitors the stator currents. We utilized the FFT, Wavelet analysis and averaging signal pattern by inner product tool to analyze stator current components. The test results clearly illustrate that the stator signature can be used to identify the presence of a bearing fault.