• Korean Journal of Biological Psychiatry
• /
• v.18 no.3
• /
• pp.163-167
• /
• 2011

Complex regional pain syndrome (CRPS) is a disease that causes chronic spontaneous pain and hyperesthesia of one or more parts of legs and arms, which is accompanied with problems of the automatic nervous system or the motor nervous system. However, up to date, it is unclear what causes the syndrome and how to diagnose and treat it. Although several treatments including medication and sympathetic nerve block are performed against CRPS, the therapeutic effect of the treatments is limited. The electroconvulsive thera-py (ECT), of which the mechanism is not clarified, is a treatment used for treatment-resistant depression. ECT is also reported to be effective against pain. Therefore, we performed the ECT for a 24-year-old female patient who has been diagnosed as CRPS. Her pain had not been much improved by medications and interventional procedures. At admission to a psychiatric ward for ECT, she com-plained of over 8 points of pain on visual analogue scale and the constrained movement around the painful part. Eight ECTs-three times a week-were performed for three weeks in hospital and then the ECT once a week was performed after her leaving the hospital. During the ECTs, pain had been reduced and the range of movement in the constrained parts had increased. Further systematic re-search is needed to confirm the effect of electroconvulsive therapy against CRPS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.96-105
• /
• 2013

This paper presents a standardization method for designing wire harness systems, based on the control types and functional blocks, for use in commercial vehicles. With a rapid increase in the installation of systems with added new features, it is very important to develop a reliable wire harness design in a short time by standardizing wire harness designs and reusing the standard design. Because the function of a system, particularly, for commercial vehicles, varies significantly on the basis of the requirements, regulations, and options, it is not effective to establish one standard design for one system. In addition, a system with the same function may differ in terms of the input conditions and output loads on the basis of the installed vehicle types, and it is not practical to standardize a harness design targeting an entire system. In this study, the wire harness designs of a system were classified into six categories based on the control types of the system: switch driven, control of a switch, control of an electronic control unit, unit driven, control of a unit, and connector operation. Then, a wire harness design of each system was divided into three blocks according to their functions: the control, drive, and monitoring blocks. The standard wire harness designs were made for each functional block of each control type. The advantage of this proposed method is that an effective and practical design can be obtained, which covers the diversities in the same system for different grades of commercial vehicles with a reduction in the number of wire harness supplements.

• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.67-73
• /
• 2000

Background: This study intends to evaluate the benefits of the administation of continuous infusion and demand doses of 0.125% ropivacaine compared with 0.125% bupivacaine after addition of fentanyl using patient controlled epidural analgesia (PCEA) for pain control during labor. Methods: Thirty-nine American Society of Anesthesiologists physical status 1 or 2 parturients were randomized by double blind design to receive either 0.125% bupivacaine with fentanyl 1 ug/ml or equivalent concentration of ropivacaine/fentanyl using PCEA; with 6~8 ml/hr basal rate, 3 ml bolus, 5 min lockout, 30 ml/hr dose limit. We assessed analgesia, the amount of study solution used in PCEA, sensory levels, motor block (0~3 scales), side effects and patient satisfaction. A postpartum questionnaire was carried out afterward. Results: There were no differences in visual analogue scores (VAS) for pain, hourly study solution use, sensory levels, side effects and patient satisfaction between groups. However, patients administered ropivacaine/fentanyl had significantly less demand, less administered in PCEA, less numbness and restriction of movement compared with patients in the bupivacaine/fentanyl group. Conclusions: Ropivacaine 0.125% with fentanyl, when administerd epidurally by PCEA for labor analgesia, was equally efficious as bupivaciane 0.125% with fentanyl, having with minimal numbness and restriction of motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1405-1408
• /
• 2005

An embedded system has been applied to many fields including households and industrial sites. In the past, user interface products with simple functions were commercialized .but now user demands are increasing and the system has more various applicable fields due to a high penetration rate of the Internet. Therefore, the demand for embedded system is tend to rise In this paper, we Implementation of an embedded system for image tracking. This system is used a fixed IP for the reliable server operation on TCP/IP networks. A real time broadcasting of video image on the internet was developed by using an USB camera on the embedded Linux system. The digital camera is connected at the USB host port of the embedded board. all input images from the video camera is continuously stored as a compressed JPEG file in a directory at the Linux web-server. And each frame image data from web camera is compared for measurement of displacement Vector. That used Block matching algorithm and edge detection algorithm for past speed. And the displacement vector is used at pan/tilt motor control through RS232 serial cable. The embedded board utilized the S3C2410 MPU Which used the ARM 920T core form Samsung. The operating system was ported to embedded Linux kernel and mounted of root file system. And the stored images are sent to the client PC through the web browser. It used the network function of Linux and it developed a program with protocol of the TCP/IP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2017

Botulinum toxin (BoNT) injections have been used not only in the field of cosmetic surgery such as forehead and eye wrinkle treatment but also in the treatment of chronic migraine, dystonia, spasticity, temporomandibular disorders (TMD). BoNT injections are the only approved therapies to date for prophylactic treatment of chronic migraine patients. Unlike the previously known paralysis of motor neurons, the mechanism of action for migraine is to block the release of non-cholinergic neurotransmitters such as substance P, CGRP, and glutamate, which are associated with peripheral sensitization and neurogenic inflammation in the sensory nerve, it is hypothesized that the signal is blocked. This review focuses on the analgesic effects of BoNT and suggests the direction for the development of injection methods for chronic migraine patients.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.223-227
• /
• 2006

Complex regional pain syndrome (CRPS) is clinically characterized by pain, abnormal regulation of blood flow and sweating, edema of skin and subcutaneous tissues, sensory and motor disturbances, and trophic changes of the skin. A 21-year-old man was suffering from pain and swelling in his right hand and forearm. His arm had been in splints for 3 weeks following an extension injury of the right fingers and wrist, with the pain having developed 2 weeks after the splinting. He was treated with various nerve blocks including continuous epidural infusion, thoracic sympathetic block and peripheral nerve blocks, and squeezing his edematous region under general anesthesia as well as intravenous lidocaine and ketamine infusions. However, all of the performed treatments had no effect on the patient's pain or hand swelling. As a next line therapy, spinal cord stimulation should be considered because of intractable severe pain and swelling to almost all other modalities of therapy. We therefore performed an early intervention of spinal cord stimulation for the patient with refractory CRPS type I 5 months after the onset of pain and have got an excellent result.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.2
• /
• pp.245-252
• /
• 2013

PURPOSE: The aim of this study is to verify the effectiveness of modified constraint-induced movement therapy(mCIMT) on upper function and activities of daily living in people with subacute stroke patients. METHODS: Eighteen participants, with subacute stroke that were randomly assigned to either the experimental group(n=9) or the control group(n=9). For subjects from the experimental group modified Constraint-Induced Movement Therapy was performed. exercise program, the patient trained in affected side upper extremity with restricted non-affected side for 1 hour and using in activity daily living for 4 hours for five times per week, during 4 weeks. For subjects from the control group, conventional upper extremity training was performed. Outcomes such as the box and block test(BBT), Fugl-Meyer motor function assessment(FMA), and modified Barthel index(MBI) were measured before and after training. Between-group and within-group comparisons were analyzed by using Independent t-test and Paired t-test respectively. RESULTS: These finding suggest that experimental group was significant increase in BBT, FMA, MBI(p<.05). In comparison of two group, experimental group was high upper function and activity daily living than control group. CONCLUSION: This study showed experimental group can be used to improve upper function and activity daily living than control group. Thus it indicates that mCIMT will be more improved through the continued upper extremity exercise program.

• Nutrition Research and Practice
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2009

We investigated the nutritional state of B vitamins and the neuropsychological functions in 25 subjects, aged $63.1{\pm}6.3$ years, residing in rural areas of Korea. Nutritional states of thiamin, riboflavin, and pyridoxine were assessed enzymatically in the erythrocytes, and folate concentrations were measured microbiologically in the plasma and erythrocytes. A battery of composite neuropsychological test was administered to the subjects. Plasma folate was correlated with the total intelligence score (p=0.049). Folate levels in the erythrocytes were correlated with the performance intelligence scores such as block design (p=0.017) and picture arrangement (p=0.016). The red cell folate was correlated with memory scores such as general memory (p=0.009) and delayed recall (p=0.000). Although it did not reach statistical significance, verbal memory (p=0.053) was highly correlated with the red cell folate. The red cell folate was also correlated positively with the percent of conceptual level response number score (p=0.029), and negatively with the grooved pegboard test score for the non-dominant hand (p=0.010). Fine motor coordination was also influenced by folate nutrition, as finger tapping scores in both hands were significantly correlated with red cell folate (dominant hand; p=0.026, non-dominant hand; p=0.004). Other B vitamins such as thiamin, riboflavin, and vitamin $B_6$ were not as strongly correlated with neuropsychological function test scores as folate was. These results suggest that folate nutrition influences neuropsychological function test scores significantly in humans. Further studies are needed to explore the relationship between folate or other vitamin B nutrition and neuropsychological functions and the implications thereof.

• PNF and Movement
• /
• v.17 no.2
• /
• pp.199-206
• /
• 2019

Purpose: The purpose of this study was to evaluate the effects of a virtual upper extremity training program using the RAPAEL Smart Glove on upper extremity function in stroke survivors with chronic hemiparesis and to focus the training program development using the Smart Glove as a feasibility study. Methods: This study was conducted using a single group and pre-post test research design in the outpatient departments of local rehabilitation units. Ten chronic hemiparetic stroke survivors with a diagnosis of first stroke received therapeutic rehabilitation at the rehabilitation units. All the participants used a virtual reality program with the RAPAEL Smart Glove for 30 minutes per session 3 days a week over 8 weeks. They also received conventional occupational therapy with functional electrical stimulation for 40 minutes per session 3 days a week for 8 weeks as an additional therapy. To analyze the effects of this therapeutic intervention, four clinical measures, including the box-block test (BBT), the Wolf motor function test (WMFT), the trail-making score, the Jebsen Taylor hand function test (JTHFT), and grip strength, were used. Results: Upon completion of the intervention in week 8, all the participants demonstrated significant WMFT, JTT, BBT, grip strength, and trail-making score gains compared to the respective baselines at week 0. Conclusion: This study suggests that virtual upper extremity training using the RAPAEL Smart Glove has a reasonable and beneficial effects on upper extremity function in chronic hemiparetic stroke survivors.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.185-191
• /
• 2021

The characteristics of the foundry sand were analyzed for water jacket core required to prevent structural deformation from the heat generated in the cylinder bore during the casting of the cylinder block of an automobile. The sand core tensile strength tester, AFS-GFN, and optical microscope were used to evaluate the its properties. If the SiO2 content is high in the foundry sand, the dimensional defects and veining defects occur due to high temperature expansion. Also, if it is too low, the core breakage, porosities, chemical burn-on defects occur. The particle size index and grain shape influenced the core strength and resin consumption, resulting in fluctuations in defect types. The higher the alkalinity of the dried sand, the lower the core strength. And the more basic, the lower the core strength. At the resin content of 1.6~1.8%, the increase in core strength after 1 hour curing was approximately at its maximum.