• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.589-594
• /
• 1998

Heat and fluid flow in the motor block room of a motorized car is numerically simulated. The motorized car, composed of a motor block room and a passenger room, supplies additional Power to achieve the design speed. A motor block, a transformer, and a fan are equipped in the motor block room. Flow phenomena in the ducts on the motor block and power transformer are investigated. Also, the three dimensional heat and fluid flow in the motor block room is simulated to give a qualitative information of the flow characteristics.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2567-2572
• /
• 2011

It is the key component that motor block system affect safety and performance of railway. It is very important to examine the performance of motor block for improvement of safety and reliability of rolling stock. As such, the motor block is an essential part of rolling stock. But provisioning quantities and spare quantities depend on the operator' experience. There are many problems that occur lots of spare or lack of spare. If there are lots of spare, it is difficult to keep the circumstance by cost issues. On the contrary, if there are lack of spare, it may have a adverse effect on the whole railway. Thus, this study offers method to estimate optimal spare of motor block using the analysis of data related with Failure rate, MTBF, standards and guidelines. And we expect this study to contribute to determine optimal spare parts.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1858-1862
• /
• 2005

Stepping motor normally operates without feedback and may loss the synchronization. This problem can be prevented by using positional feedback. This paper introduces one method for closed loop control of stepping motor and a method for combining full-step control and micro-step control. This combination controlling apparatus can perform position control with high accuracy in a high speed, so that it will not suffer from vibration (or hunting) problem when stopping motor. Controlling apparatus contains a position counter block for detecting rotor position of stepping motor, a driving block for supplying current to windings of stepping motor, a control block for comparing output signal of position counter block with command position (desired position) and outputting current command signal based on deviation between current position and command position of rotor. To output current command signal, the control block refers to a sine wave data table. This table contains value of duty cycle of Pulse Width Modulation signal. As the second object of this paper, the process of building this data table is also presented.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.313-315
• /
• 2009

In this thesis, A methodology of system implement for PID controller, PWM logic, HSC logic, Host Communication and external DAC interface are implemented into single FPGA chip is proposed. The implemented system is used to control the speed of DC servo motor. A DATA block transfers set point value(SV) and P, I, D gain parameters to the corresponding Blocks respectively by the Host Communication to Computer. A HSC block generates process value(PV) by a pulse and $90^{\circ}$ shifted pulse from the encoder A PID block makes error(E) signal from the set value and process value and output manufacture value(MV) through the PID controller. In PWM block using the MV from the PID block, drives H-bridge controlling the Motor. Also DAC interface controls the DAC to graph the digital signal such as SV, PV, E, MV in FPGA onto the Oscilloscope.

• The Korean Journal of Pain
• /
• v.30 no.1
• /
• pp.62-65
• /
• 2017

Reactivation of the latent varicella zoster virus in the sensory ganglion causes herpes zoster (HZ). Its characteristic symptom is a painful rash in the involved dermatome. HZ-induced motor weakness is rare and is usually resolved within one year of the onset, but some patients permanently experience motor dysfunction. Epidural steroid administration, with antiviral therapy, can be effective in treating pain from HZ and preventing postherpetic neuralgia. But an epidural block is contraindicated in patients receiving thromboprophylaxis. A psoas compartment block (PCB) provides equivalent analgesic efficacy with significantly low incidence of complication, compared to an epidural block. A 68 year old male patient recieving thromboprophylaxis presented with motor weakness following painful rash in his left L4 dermatome. Ten days before presentation, herpetic rash occurred on his left leg. We performed PCB with a steroid and local anesthetic, which successfully and safely alleviated the pain and motor weakness from HZ.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.288-292
• /
• 2013

This paper presents the result of life-cycle cost (LCC) estimation for domestic products propulsion control system (motor block unit) of KTX-1 considering periodic maintenance. Life cycle costing is one of the most effective approaches for the cost analysis of long-life systems such as the KTX-1. Life cycle costing includes the cost of concept design, development, manufacture, operation, maintenance and disposal. To estimate LCC for domestic products motor block unit, it was analyzed physical breakdown structure (PBS) on motor unit in view of maintenance cost and unit cost etc. As a results, life cycle cost on motor block unit increased moderately expect for periodical time when major parts are replaced at the same time. hereafter this results will be reflected in the domestic products being developed.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1663-1668
• /
• 2017

A BLDC motor with higher number of phases has several advantages, compared to the conventional three-phase BLDC motors. It can reduce the commutation torque ripple and the iron loss without increasing the voltage per phase and increase the reliability and power density. Higher number of phases increase the torque-per-ampere ratio for the same machine volume and output power by widening the electrical conduction period. In this paper, the proposed seven-phase BLDC motor drive system is made into several functional modular blocks, so that it can be easily extended to other ac motor applications: back-EMF block, hysteresis current control block, pwm inverter block, phase current block, and speed/torque control block. Also in a system of BLDC motor drive, the PI controller has been widely used in the speed controller because of the simple implementation. To obtain a good speed response in a general drive system using the PI controller, the high bandwidth of a controller is established. therefore, in this paper, a Fuzzy controller is applied to the 7-phase BLDC motor drive system in order to improve the speed control performance. The Fuzzy controller is compared with a conventional PI controller through the experiment with respect to speed dynamic responses. These experimental results show that the Fuzzy controller of the 7-phase BLDC motor drive system is superior over the conventional PI controller. The algorithm using the Fuzzy controller can improve a comfortable ride in the field of high performance 7-phase BLDC motor drive applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.827-835
• /
• 2015

In this paper, we present the implementation method of Dynamic Matrix Control(DMC) block for use with a Rapid Control Prototyping(RCP) system and consider the speed control of a DC motor using the developed DMC block. Firstly, we briefly introduce a lab-built RCP system. Secondly, we present a method for implementing a DMC block using C-language, which enables the DMC algorithm to be represented in a library block that can be used in a Simulink environment. Finally, we use the developed DMC block for the speed control of a DC motor, through which we show that the DMC-based control system can be easily implemented and applied to the real-time control of systems with relatively fast dynamics.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.657-658
• /
• 2008

This paper presents a impletation of vector control of induction motor using Matlab/Simulink and dSPACE DS1104. System consists of digital input block, digital ouput block, ADC block, protection block, motor control block and PWM block. It is applied indirect vector control and PI controller to speed controller and current controller.