• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.895-896
• /
• 2006

This paper presents an analytical solution to calculate parameters of permanent magnet synchronous motor equipped with surface-mounted magnet by using transfer relations theorem(TRT) in terms of two-dimensional model in polar coordinates. The analytical results are validated by comparison with finite element analyses (FEA).

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.33-39
• /
• 2003

This paper presents the self-commissioning for surface-mounted permanent magnet synchronous motor. The proposed strategy executes three tests with a vector controlled inverter drive system. To do this, synchronous d-q axes currents are appropriately controlled for each test. From the three tests, armature resistance, armature inductance, equivalent iron loss resistance, and emf coefficient are identified automatically. The validity of the proposed strategy is confirmed by experimental results.

• Journal of Power Electronics
• /
• 제3권3호
• /
• pp.197-204
• /
• 2003

An improved nonlinear speed control of a permanent magnet synchronous motor (PMSM) is presented A quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived Using this model, to overcome the drawbacks of conventional nonlinear control scheme, the improved nonlinear control scheme which employs time delay control (TDC) scheme is proposed. To show the validity of the proposed control scheme, simulation studies are carried out and compared with the conventional control scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.427-429
• /
• 2005

In order to tune the speed controller in the linear servo applications the accurate information of a mover mass including a load mass is always required. This paper suggests the mass estimation method of a permanent magnet linear synchronous motor(PMLSM) by using the parameter estimation method of Least-Squares algorithm. First, the deterministic autoregressive moving average(DARMA) model of the mechanical dynamic system is derived. The application of the Least-Squares algorithm shows that the mass can be accurately estimated both in the simulation results and in the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.114-115
• /
• 2013

This paper proposes an estimation method of back emf for the sensorless controlled high speed PMSM drive in turbo compressors with air bearings. The back emf of PMSM motor varies due to the temperature variation, which deteriorates the control performance of sensorless controlled PMSM drives. The proposed method is based on the current model of the PMSM motor. The simulation results show that the proposed method estimates the back emf of sensorless controlled PMSM drives with reasonable accuracy for parameter adaptation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.269-271
• /
• 1998

Reluctance Synchronous Motors(RSM) with new rotor shape are considered in this paper. Since the stator of a RSM is similar as that of an induction motor, attention is focused here on the rotor structure. We have designed the parameter of RSM and analyzed the characteristics of the electromagnetic energy conversion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.131-134
• /
• 2001

The accurate identification of the motor parameters is crucially important to achieve high dynamic performance of induction motors. In this paper, the motor parameters such as rotor resistance, stator(rotor) leakage inductance, mutual inductance are measured for torque monitoring and indirect vector control. To demonstrate the practical significance of the results, some experimental results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.677-679
• /
• 1993

The necessary parameter and states for the field-oriented control scheme of induction motor have been correctly estimated by EKF(Extended Kalman Filter). In this paper, Reduced-Order EKF(Extended Kalman Filter) is proposed tn estimate rotor speed and rotor flux. It is profitable in the implementation of field-oriented control scheme rather than Full-Order EKF because of saving operational quantity. The simulation results show that the proposed Reduced-Order EKF is excellent performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.886-889
• /
• 2003

In this paper a design of educational robot based on a PC and/or a microprocessor is discussed. The educational robot has 5 DOF and Is made with Swiss Mini Servomotor and Motor Controller IC LM629N. Also, a GUI(Graphical User Interface) is programmed by Visual Basic. This system is completed to consider control properties of the educational robot with 5-DOF that can be changed the parameter of controller by software.

• 전기의세계
• /
• 제31권2호
• /
• pp.126-131
• /
• 1982

Induction motors are known to cause voltage dip, oscillating torque and inrush current on the dynamic period. To compensate for these undesirable effects, the prediction of dynamic performances is required. The dynamic performances are determinated by circuit time constants. From this point of view, in this paper, the dynamic equivalent circuit included only three time-constant parameters are presented. To predict more simply dynamic performances, the new characteristics time constant parameters are analyzed, and now these parameters are described as the function of circuit time constants. This paper reviews and analyzes the use of series capacitance compensations, and the use of this analysis can make simply a prediction about oscillating conditions.