• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.1
• /
• pp.73-83
• /
• 2003

Out of a total of 437 subjects surveyed, 83.3 put on motocycle suits when they drive. Though the suits are not comfortable, many motocycle riders put them on for safty reasons. To protect a driver's body, motocycle suits should be patched with protective bands or safty pads in various areas like part of waist, backbone, pelvis and knees. The ratio of dissatisfaction with the preceding motocycle suits was great owing to inconvenience in washing and in posture, especially heavy suits. Their favorite suits were found to be linking or coupled types among two piece styles. Leather was shown to be the preferable material and they wanted designs which the protective bands, or pads can be attatched on each portion for needs of safty against impact but designed for comfort and ease of movenment.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.5
• /
• pp.449-460
• /
• 2014

Since the emergence of domestically produced automobiles in 1964, the number of automobiles in circulation in South Korea has increased constantly. With this rapidly increasing number of automobiles, automobile-induced environmental pollution has become an issue of great concern, especially with regard to air pollution. Of the carbon composites contained in automobile exhaust gas, PAHs are known to be carcinogenic and highly deleterious to humans and thus need to be urgently mitigated. To address this issue of PAHs, this study was conducted to estimate qualitative of particulate PAHs contained in carbon composites in automobile exhaust gas, by capturing all particulate matter discharged from the latter. To allow for differentiated analyses, the automobiles investigated were divided into 4 groups: gasoline vehicle, motocycle, diesel vehicle, and LPG vehicle. Samples were analyzed using two methods. First, in-depth analysis was performed on organic carbon (OC) and elemental carbon (EC) composites with analysis parameters, using the Thermal Optical Transmittance Method (NIOSH 5040). Second, for the examination of particulate PAHs, GC/MSD was used to analyze the 16 PAH species specified by the Environmental Protection Agency (EPA). The analyses yielded the findings that diesel vehicles had the highest mass concentration ($2,007{\mu}g/m^3$), followed by motocycle ($1,066{\mu}g/m^3$), LPG vehicle ($392{\mu}g/m^3$), and gasoline vehicles ($270{\mu}g/m^3$). The highest carbon concentrations in total particulate matter by vehicle weight were produced from LPG vehicle (79.8%), followed by gasoline vehicle (77.4%), motocycle (69.8%), and diesel vehicle (59.1%).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.165-170
• /
• 2016

Recently, IoT(Internet of Things) technology is widely applied in not only our everyday lives but also in industry, medical field and security system. NFC system, the basis of IoT, is in the spotlight which can be an alternative solution of a anti-theft system for motorcycle as they basically have practicality and security issues. Anti-theft system for motorcycle using the NFC smart devices based on RFID has been proposed. because Progress of Smart Device If someone get the Key for motorcycle theft, he can be easily stolen motorcycle. We thought about the concept of NFC security devices as a wireless key and automatic solenoid valve for setting the lock and unlock module. In this study, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.108-114
• /
• 2007

This research represents the catalytic converter for application in the motorcycle. We have to consider about catalytic converter for reducing exhaust gas strength regarding the displacement volume enlargement. The catalytic converter has been widely used to satisfy the regulations of pollutant emissions from automobiles. Recently, all catalytic converter researches are about automobile. Study about motorcycle catalytic converter has not been conducted yet. In this study, flow uniformity and pressure distribution were simulated in the monolithic inlet of catalytic converter for motorcycle. Exhaust pulsation pressure was set as transient condition about. It was found that flow uniformity shown in base model (0.85) was lower than megaphone model (0.98).

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.1348-1351
• /
• 2012

본 연구는 오토바이에서 생성되는 유선통신 신호와 GPS를 이용한 속도를 수집하여 헬멧에 전송하여 스마트폰을 이용해 현재 위치정보와 오토바이에서 전달되는 속도 정보 등을 저장한 블랙박스 App과 무전 기능인 멀티통신 App을 개발했다. 또한 오토바이에서 생성된 속도 데이터나 신호 데이터값을 거치대를 통해 헬멧으로 전달되어 헬멧에 Headup Display를 통해 운전자에 전달하는 Headup Display를 탑재한 헬멧을 연구개발 하였다. 본 연구의 결과물은 오토바이 등 여러 사람이 함께 이동하면서 서로의 정보를 실시간으로 공유할 수 있어서 효과적으로 활용할 수 있다. 연구의 한계점은 연구소에서 실험적으로 개발 운용한 모델로서 상업적인 접근에 대한 구체적인 방안이 필요하다.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.2
• /
• pp.1011-1019
• /
• 1996

The incidence of spinal cord injury increase due to traffic accident, industrial accident and leisure sports. Spinal cord injury damages motor and sensory function below the injury level, also affects autonomic functions associated with voiding and defecation. Sexual dysfunction and psychosocial, vocational maladaptations are also some of the unwanted consequences of injury. The purpose of this study is look for means to prevent and to manage complications in spinal cord injury through investigation and analysis. The subjects of this study in spinal cord injured patients were admitted to the department of physical therapy, Kwangju christian Hospital, Nam Kwang Hospital, Chun Nam university Hospital and Cho Sun university Hospital, from April, 1, 1995 to March, 31, 1996. The results are as follows: 1. The subjects comprised 96 cases of spinal cord injury, ranging from 17 to 85(mean-40.8 yrs) and included 72 males and 24 females. Among these patients, 58 were cervical injury, 20 were thoracic injury and 18 were lumbar injury. 2. As for a major causative of spinal cord injury were traffic accident(59.4%), fall down (27.1 %), and motocycle(4.2%).. 3. The bladder control were taken by indwelling cathetar(41.7%), Crede maneuver(37.5%) and self voiding(16.7%). The bowel control were taken by all aid(61.5%), assitance(32.3%) and self defecation(6.2%). 4. Possible of sexual function were 35 cases (47.9%). 5. The device of transfer used wheel chair(69.8%) and bed(16.7%). 6. The patients with higher cord lesion got more serious pain than lower cord lesion. Also the patients with higher cord lesion got a serious spasticity. 7. The incidence of decubitus ulcer among 96 patients were in case 46(47.9%). The largest group of the pressure sore sites were sacral portion(82.0%), less than 1 month of onset occured a large numbers(50%). Incidence of pressure sore by spasticity occured many patients in case of mild or moderate. Incidence of pressure sore by pain occured many patients in case of severe pain.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.161-170
• /
• 2008

This study deals with the accident models by vehicle type. The goal is to develop the accident models by vehicle type using the data of 143 4-legged signalized intersections in Cheongju. In pursuing the above, this study gives the particular attentions to explaining the relationships between the values of EPDO(equivalent property damage only) and the traffic and geometric elements. The main results analyzed are the followings. First, 6 negative binomial models are developed, which are all significant at the 90% confidence level. Second, the values of ${\rho}^2$ by vehicle type are 0.14307(auto), 0.35556(large van), 0.21684(small van), 0.205152(motocycle), 0.32338(light-duty truck) and 0.29046(heavy-duty truck), that are all analyzed to be statistically significant. Finally, the common variable included in all models is ADT(average daily traffic), and the specific variable(SV) of auto is analyzed to be the sum of lane width of main road, SV of large van is the average yellow time, and SV of small van is the difference in the number of lane between main and minor road.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.141-148
• /
• 2021

In some intersections or busy traffic roads, there are more pedestrians in a specific period of time, and there are many traffic accidents caused by road congestion. Especially at the intersection where there are schools nearby, it is particularly important to protect the traffic safety of students in busy hours. In the past, when designing traffic lights, the safety of pedestrians was seldom taken into account, and the identification of motor vehicles and traffic optimization were mostly studied. How to keep the road smooth as far as possible under the premise of ensuring the safety of pedestrians, especially students, will be the key research direction of this paper. This paper will focus on person, motorcycle, bicycle, car and bus recognition research. Through investigation and comparison, this paper proposes to use YOLO v4 network to identify the location and quantity of objects. YOLO v4 has the characteristics of strong ability of small target recognition, high precision and fast processing speed, and sets the data acquisition object to train and test the image set. Using the statistics of the accuracy rate, error rate and omission rate of the target in the video, the network trained in this paper can accurately and effectively identify persons, motorcycles, bicycles, cars and buses in the moving images.