• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 하계학술대회
• /
• pp.1249-1252
• /
• 2022

In this paper, we propose a conceptual framework that identifies video frames in motion containing the movement of people and vehicles in traffic videos. The automatic selection of video frames in motion is an important topic in security and surveillance video because the number of videos to be monitored simultaneously is simply too large due to limited human resources. The conventional method to identify the areas in motion is to compute the differences over consecutive video frames, which has been costly because of its high computational complexity. In this paper, we reduced the overall complexity by examining only the keyframes (or I-frames). The basic assumption is that the time period between I-frames is rather shorter (e.g., 1/10 ~ 3 secs) than the usual length of objects in motion in video (i.e., pedestrian walking, automobile passing, etc.). The proposed method estimates the possibility of videos containing motion between I-frames by evaluating the difference of consecutive I-frames with the long-time statistics of the previously decoded I-frames of the same video. The experimental results showed that the proposed method showed more than 80% accuracy in short surveillance videos obtained from different locations while keeping the computational complexity as low as 20 % compared to the HM decoder.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.1036-1043
• /
• 2005

본 논문에서는 H.264 표준 동영상 부호화 방식을 위한 순차적 움직임 벡터 오류 은닉 기법에 대해 제안한다. H.264 표준 동영상 부호화 방식에서의 움직임 예측과정은 다양한 크기의 서브 매크로 블록 모드에 따라 각기 다른 움직임 벡터 개수를 갖게 되고, 이로 인해 움직임 벡터는 기존의 표준 부호화 방식에 비해 상대적으로 적은 영역을 대표하게 된다. 그러므로 이웃한 블록의 움직임 벡터간의 상관관계는 서브 매크로 블록의 크기가 작을수록 더 커지게 된다. 제안 방식에서는 변화된 국부 통계 특성에 대한 적응도에 따른 $\alpha$-trimmed mean 필터를 이용하여 움직임 벡터를 순차적으로 복구하는 움직임 벡터 오류 은닉기법에 대해 제안한다. 실험 결과를 통해 제안한 방식이 실시간 동영상 전송에 적합하며 기존의 블록 경계 정합 방식 및 라그랑즈 보간 방식과 유사한 성능을 보임을 확인할 수 있었다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제15권4호
• /
• pp.31-40
• /
• 2009

오늘날 실제 사람의 움직임을 촬영하여 얻은 동작 데이터는 영화제작, 게임 개발, 재활의학, 스포츠 분석 등의 다양한 분야에서 활용되고 있다. 시간에 따라 변화하는 일련의 자세로 이루어진 동작 데이터는 그 내용을 신속하고 정확하게 파악하는 것이 쉽지 않다. 이는 특히 많은 양의 동작데이터를 관리하고 원하는 동작을 찾고자 할 때 장애가 되곤 한다. 널리 사용되는 한 가지 방법은 동영상을 재생하듯이 관찰 시점을 진전시키는 동시에 3차원 공간상의 시야를 조절하는 것이다. 하지만 이 방식은 시점과 시야의 두 요소를 함께 고려하면서 데이터의 길이에 비례하는 시간 동안 지속적인 상호작용을 수행하여야 하는 번거로움을 야기한다. 본 논문은 동작 데이터를 분석하여 일련의 효과적인 관찰 시점 및 시야를 자동으로 찾아내고, 이로부터 생성된 이미지 시퀀스를 만화책 레이아웃 형식으로 배치하는 새로운 시각화 방법을 제안한다. 사용자는 만화책을 읽는 것처럼 바르게 전체 흐름을 파악할 수 있고, 원하는 동작이 등장하는 부분을 쉽게 찾아낼 수 있다. 이동, 권투, 환경과의 상호작용 등 여러 종류의 동작 데이터를 만화책 형식으로 시각화한 결과를 보임으로써 제안된 방법의 유용성을 확인하였다.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.293-310
• /
• 2006

In seismic prone areas it is possible to meet very different objects (equipment components, on shelf artefacts, simple architectural elements) that can be modelled as a rigid body rocking on a rigid foundation. The interest in their behaviour can have different reasons: seismological, in order to estimate the ground motion intensity, or more strictly mechanical, in order to limit the response severity and to avoid overturning. The behaviour of many rigid bodies subjected to twenty wide ranging acceleration recordings is studied here. The response of the blocks is described using kinematic and energy parameters. A condition under which a so called scale effect is tangible is highlighted. The capacity of the signals to produce overturning is compared to different ground motion parameters, and a good correlation with the Peak Ground Velocity is unveiled.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1933-1936
• /
• 2005

The isometric area of the anterior cruciate ligament was calculated during knee flexion-extension. Flexion-extension motion data of the joint were obtained using Fastrak and a three-dimensional motion measurement system. A total of five subjects were seated on a flat table and the tibia sensor position was measured with the femur fixed on the table. A three-dimensional knee model was constructed using a graphic tool to simulate the knee motion. Twenty seven positions of the tibia region and forty two positions of the femur region were selected and the distances between the determined tibial and femoral points were calculated. Highly isometric areas were found and displayed as three dimensional aspects.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.204-209
• /
• 2003

Cam mechanisms are one of the most popular devices for generating intermittent motion and are widely used in many areas. Also, as being interested in research of precision field, cam mechanism is required high accuracy and continuity, In. In this paper, the cam mechanism of filament automatic assembly machine design for precision motion is proposed. The modelling of a cam mechanism, cam profile functions, and the design of the cam considering the precision positioning of the cam mechanism is studied. And, simulation of designed cam mechanism had been carried out dynamic analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.578-582
• /
• 2000

When the motion of vibrating structure is restrained due to the adjacent objects, the frequencies and the mode shapes of the structure change and its vibration characteristics becomes unpredictable, in general. Although the importance of the study on this type of vibration model increases in many engineering areas, most studies conducted so far are limited to the theoretical study on dynamic responses of the structure with the separation plate, including some experimental works. In the paper, both numerical analyses and experiments are conducted to study the chaotic vibration characteristics and the dynamic response of a fixed-free beam which has restrained motion at the free end by the separation plates. Results are presented for various magnetic forces and gaps between stops.

• 한국측량학회지
• /
• 제38권5호
• /
• pp.401-406
• /
• 2020

Continuously monitoring of Horizontal and Vertical movements in vulnerable areas due to earthquakes and volcanic activities is vital. These geohazard activities are the result of a slow deformation rate at the tectonic plate boundaries. The recent development of GPS (Global Positioning System) technology has made it possible to attain a millimeter level changes in the Earth's crust. This study used continuously observed GPS data at the flank of Ol Doinyo Lengai volcanic Mountain to determine crustal motion caused by impinging volcano from mantle convention. We analyzed 8 GPS observed from June 2016 to Dec 2019 using a well-documented Global Kalman Filter GAMIT/GLOBK software. The resulting velocity from GAMIT/GLOBK analysis was then used to compute the relative motion of our study area with respect to Nubia plate. Our analysis discovered a minor motion of less than 5mm/year in both horizontal and vertical components.

• 센서학회지
• /
• 제31권2호
• /
• pp.79-84
• /
• 2022

Self-powered sensors play an important role in everyday life, and they cover a wide range of topics. These sensors are meant to measure the amount of relevant motion and transform the biomechanical activities into electrical signals using triboelectric nanogenerators (TENGs) since they are sensitive to external stimuli such as pressure, temperature, wetness, and motion. The present advancement of TENGs-based self-powered wearable, implantable, and patchable sensors for healthcare monitoring, human body motion, and medication delivery systems was carefully emphasized in this study. The use of TENG technology to generate electrical energy in real-time using self-powered sensors has been the topic of considerable research among various leading scholars. TENGs have been used in a variety of applications, including biomedical and healthcare physical sensors, wearable devices, biomedical, human-machine interface, chemical and environmental monitoring, smart traffic, smart cities, robotics, and fiber and fabric sensors, among others, as efficient mechanical-to-electric energy conversion technologies. In this evaluation, the progress accomplished by TENG in several areas is extensively reviewed. There will be a discussion on the future of self-powered sensors.