• 제목/요약/키워드: Mortar filled pipe

검색결과 10건 처리시간 0.025초

Confining Effect of Mortar-filled Steel Pipe Splice

  • Kim, Hyong-Kee
    • Architectural research
    • /
    • 제10권2호
    • /
    • pp.27-35
    • /
    • 2008
  • Because of several advantages of mortar-filled sleeve splice in reinforced concrete buildings, this method is being applied increasingly at construction sites and various methods of the splice have been developed in Korea and other countries. In order to apply this system in the field, studies on mortar-filled sleeve splice have been mainly experimental research focused on overall structural performance. However, for understanding the structural characteristics of this splice more accurately, we need to study the confining effect of sleeve, which is known to affect bond strength between filling mortar and reinforcing bar, the most important structural elements of the bar splice. Thus, in order to examine the confinement effect of mortar-filled steel pipe sleeve splice, the present study prepared actual-size specimens of steel pipe sleeve splice, and conducted a loading. Using the test results, we analyzed how the confining effect of steel pipe sleeve affects the bond strength of this splice and obtained data for developing more reasonable methods of designing the splice of reinforcement.

모르타르 충진 비닐하우스 파이프의 강도특성에 관한 연구 (A Study on the Strength Characteristics of Vinyl House Pipe Filled with Mortar)

  • 백신원;김한중
    • 한국농공학회논문집
    • /
    • 제57권5호
    • /
    • pp.13-17
    • /
    • 2015
  • There are many vinyl houses in rural areas. These vinyl houses have occasionally been collapsed due to heavy snow load in winter. If these vinyl houses are collapsed, many farmers get a lot of economical damages. So it is very important to built safe vinyl house that is able to withstand the applied heavy snow load. In this study, compressive buckling and flexural tests were performed to investigate the strength increase of circular mortar filled pipes. The results showed that buckling load and flexural moment of mortar filled pipes were increased 42 % ~ 82 %, 40 % ~ 44 % respectively more than only pipe without mortar. It is recommended that mortar filled pipes as main members of vinyl house have to be used to prevent collapsing due to the severe snow load.

Guided-Waves-Based Mortar-Filled Steel Pipe Inspection Using EMAT End Wavelet Transform

  • 나원배
    • 한국해양공학회지
    • /
    • 제20권2호
    • /
    • pp.8-15
    • /
    • 2006
  • Guided-waves-based mortar-filled steel pipe inspection is carried out through using EMAT (Electro magnetic acoustic transducer) and wavelet transform. Possibly existing anomalies such as separation (or void) and inclusion are made in the fabricated mortar-fled steel pipes: these anomalies are infected. Since guided waves have the long range inspection capability, EMAT has its own advantages over the conventional PZT (Piezoelectric zirconate titanate), and wavelet transform gives the multi-resolution on time-frequency domain results, the suggested technique gives an alternative way for inspecting mortar-filled steel pipes, which are popularly used for supporting marine structures such as piers, wharfs, moles, and dolphins. Through this study, it is show that the suggested technique is promising for detecting the amounts of separations and inclusions.

모르터 충전 강관 슬리브를 이용한 철근 이음의 해석 모델 (The Analytical Model for the Reinforcement Bar Connection in Grout-Filled Steel Pipe Sleeve)

  • 황재호;이용재;이원호;이리형
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.519-526
    • /
    • 1997
  • The purpose of this study is to develop the analytical model for the reinforcement bar connection in group-filled steel pipe sleeve, which consists of beam elements for the reinforcement bar and shell elements for the sleeve and the mortar and spring elements for the bond stress-slip relationship. In the reinforcement bar connection using grout-filled steel pipe sleeve, the major variables are the bond stiffness between reinforcement bar and mortar($K_1$) and between sleeve and mortar($K_2$). It is nearly difficult to predict the exact bond stiffness with the experimental results. Therefore, The linearly elastic analyses using ABAQUS, FEM package show the validity of the mathematical equations for the bond stiffness and the choice of material elements in this paper. To predict the behaviour between yield and ultimate tensile strength, the nonlinear analyses must be performed henceforth.

  • PDF

파괴모드 추정방법을 이용한 모르타르 충전식 슬리브 철근이음의 강성 평가 (Evaluation on Stiffness of Mortar-filled Sleeve Splice Using Estimation Method of Failure Mode)

  • 김형기
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권1호
    • /
    • pp.27-34
    • /
    • 2012
  • 본 연구에서는 기존의 모르타르 충전식 슬리브 철근이음에 대한 부착강도식으로부터 유도한 이 철근이음의 파괴모드 추정방법을 이용하여, AIJ 규준에 의하여 평가한 이 슬리브 철근이음의 강성을 검토하였다. 이것을 위하여 261개 모르타르 충전식 슬리브 철근이음의 기존 실험자료를 채택하여 실험의 결과를 분석한 결과에 의하면 모르타르 충전식 철근이음의 파괴모드 추정방법은 돌기가 없는 강관 슬리브에 SD500 철근을 사용한 철근이음을 제외한 모르타르 충전식 슬리브 철근이음에 대한 강성을 효과적으로 평가할 수 있었다. 그리고 이 슬리브 철근이음의 파괴모드 추정방법에 적용하여 철근의 인장파단 영역에 있는 실험체 중에 주물 슬리브와 돌기가 있는 강관 슬리브를 사용한 실험체에서 SD400 철근을 사용한 경우는 98%, SD500 철근을 사용한 경우는 모든 실험체가 단조가력 시의 강성이 AIJ 규준의 A급 이상인 것으로 나타났고, 철근의 인장파단 영역에 있는 모든 실험체는 슬리브의 종류와 슬리브에 매입한 철근 종류에 관계없이 반복가력 시의 강성이 AIJ 규준의 A급 이상인 것으로 나타났다.

반복하중이 작용하는 고강도 모르타르 충전식 슬리브 철근이음에 대한 강성 평가 (Evaluation on Stiffness of High-strength Mortar-filled Sleeve Bar Splice Under Cyclic Loading)

  • 김형기;정구용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권1호
    • /
    • pp.85-93
    • /
    • 2013
  • 본 논문에서는 반복하중이 작용하는 고강도 모르타르 충전식 슬리브 철근이음의 강성에 대한 합리적인 검토를 하기 위하여 100여개 고강도 모르타르 충전식 슬리브 철근이음의 실험데이터를 이용하여 슬리브 철근이음이 보유하고 있는 구조인자가 반복 하중이 작용하는 슬리브 철근이음의 강성에 미치는 효과를 파악하였고, AIJ 규준에 정해져 있는 강성 등급을 충족시키는 최소한 의 조건에 대하여 평가한 결과, SD350과 SD400 철근을 매입한 모르타르 충전식 주물 슬리브 철근이음에서 $f_{g^*}$(L/d)가 470MPa 이상이 된다면 AIJ 규준의 SA급 강성, $f_{g^*}$(L/d)가 340MPa 이상이 된다면 AIJ 규준의 A급 강성을 최종파괴형식과 슬리브 형상에 상관없이 확보할 수 있는 것으로 나타났다. 또한 SD500 철근을 매입한 모르타르 충전식 슬리브 철근이음에서 주물슬리브와 강관 슬리브를 사용한 경우는 $f_{g^*}$(L/d)가 400MPa 이상이 된다면 AIJ 규준의 A급 강성을 확보할 수 있는 것으로 나타났다.

FRP 긴장재의 비금속 정착 시스템의 거동에 관한 연구 (A Study on Behavior of Novel Non-Metallic Anchoring System for FRP Tendons)

  • 서관세;조병완;이계삼;김영진
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
    • /
    • pp.983-988
    • /
    • 2000
  • Anchoring systems with structural stability and endurance have been one of the most important elements for PSC structures, especially for the structures using non-corrosive FRP tendons. FRP tendons are in increasing use for underground and coastal structures constantly contacted with fresh water or sea water because of their superiority to metallic ones in corrosion-resistance. In this study new non-metallic anchoring system for FRP tendons has been tested and investigated. The newly developed anchoring system utilizes FRP pipes and HEM (Highly Expansive Mortar). The major factors considered in this experiment were expansive pressure of HEM during its hydration and the strength of GFRP(Glass Fiber Reinforced Plastic) Pipe. Anchoring forces of the new anchoring system were investigated from the pull-out testes. The authors analyzed pull-out procedures of the FRP tendons in the various pipe filled with HEM and suggested an improved idea to develop novel non-metallic anchoring system for FRP tendons

고성능 팽창재를 이용한 FRP 긴장재의 정착에 관한 연구 (A Study on the Behavior of Non-Metallic Anchoring System for FRP Tendons)

  • 김덕현;조병완;이계삼;김영진
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 춘계학술발표대회 논문집
    • /
    • pp.23-28
    • /
    • 2001
  • Since non-corrosive Fiber Reinforced Polymer(FRP) tendons have been in increasing use for underground and coastal structures constantly contacted with fresh water or sea water because of their superiority to metallic ones in corrosion-resistance, new non-metallic anchoring system for FRP tendons has been developed and investigated to verify the effectiveness of tendon force, which consist of mainly FRP pipes and Highly Expansive Mortar(HEM). The major factors considered in this experiment were expansive pressures of HEM during its hydration, sleeve lengths and types, and anchoring methods of tendon. New anchoring system were investigated from the pull-out tests. The pull-out procedures of the FRP tendons in the various pipe filled with HEM were analyzed and improved ideas were suggested to develop novel non-metallic anchoring system for FRP tendons The pull-out tests for the FRP tendon and new non-metallic anchoring system were conducted. The results show that non-metallic anchoring system for the FRP tendon has been more stablized due to the gradual expansive pressrure of HEM, as tims goes. Since tile lower stiffness of FRP pipes causes the weakness of anchoring force, it requires the increase of stiffness using a carbon fiber or an increased section area.

  • PDF

UPRS 공법과 프론트잭킹 공법의 파이프루프 주변 현장토압 계측결과 비교 (Comparison of earth pressure around pipe-roof between UPRS and front-jacking method)

  • 심영종;진규남;송기일
    • 한국터널지하공간학회 논문집
    • /
    • 제17권5호
    • /
    • pp.513-522
    • /
    • 2015
  • 본 연구의 목적은 비개착공으로 시공되고 있는 지하차도를 대상으로 지하차도 상부 및 측벽에 작용하는 토압을 계측하여 압입된 강관에 의한 지보효과 확인을 목적으로 하고 있다. 근래의 비개착공법은 파이프루프를 형성하기 위한 강관을 압입한 후 강관과 강관사이를 철근으로 보강하고 모르타르를 타설하는 방식으로 침하에 대한 안정성을 보다 확보하기 위한 노력을 기울이고 있다. 이에 최근 적용되고 있는 UPRS(Upgraded Pipe Roof Structure)공법과 프론트잭킹(Front-Jacking)을 중심으로 강관 압입 후 강관에 의한 토압감소효과를 확인하기 위하여 지하차도 주변의 토압을 계측하였다. 그 결과 UPRS공법의 경우 지하차도에 토압이 상당부분 감소하여 강관보강에 의한 지보강성 효과가 발휘되는 것으로 분석되었다. 프론트잭킹 공법의 경우 지하차도 구조물이 외부에서 제작되어 압입되는 형식으로 강관을 보강시킬 필요가 없기 때문에 강관보강에 의한 토압감소효과는 예측한대로 발휘되지 않는 것으로 분석되었다.

고강도 강관을 적용한 SP-록볼트 개발 및 현장 적용을 위한 연구 (A study on the development and field application of SP-Rockbolt with high-strength steel pipe)

  • 신현강;정혁상;안동욱
    • 한국터널지하공간학회 논문집
    • /
    • 제19권4호
    • /
    • pp.651-668
    • /
    • 2017
  • 터널 굴착에 따른 초기 안정성 확보를 위해 1차 지보재인 숏크리트와 록볼트를 가장 적절한 시기에 터널 굴착면 주면으로 타설하여야 한다. 이러한 지보재의 역할은 장 단기적인 터널 안정성에 매우 중요한 역할을 하기 때문이다. 여기서 록볼트는 터널 굴착시 응력이완에 따라 발생되는 외압을 축력으로 받아들여 터널 굴착면의 숏크리트에 전달하여 전체적인 안정성을 도모하는 중요한 지보재이다. 현재까지 록볼트의 재료는 현장 수급이 유리한 이형강봉을 많이 이용하였으나 최근들어 불확실한 품질의 중국산 자재의 시장진입과 록볼트 주면 모르타르 충전시 흘러내림에 의한 밀실한 충전불량, 용수에 의한 부식 등 다양한 문제점이 나타나고 있다. 특히, 현재의 설계기준상 이형강봉에 대한 기계적 성질의 기준은 있으나 그 외 섬유보강 플라스틱(FRP) 등이 사용될 수 있으나 명확한 기준은 제시되지 않고 있다. 그래서 새로운 소재로 개발되더라도 실제 현장 적용에 있어서는 해결해야 할 부분이 많다. 따라서, 본 연구에서는 상기의 기존 록볼트가 지니고 있는 여러 문제점을 해결, 개선하고자 Autobeam 재료를 이용한 고강도 강관 록볼트(Samrt Pipe-록볼트, 이하 SP-록볼트)를 개발한 내용을 다루고 있다. 개발된 록볼트의 성능평가를 위해 현장시험을 수행하고, 기존 모르타르 충전을 개선할 수 있는 충전재를 개발하여 록볼트의 성능을 더욱 향상하고자 하였다. 또한, 실무현장의 적용성 확보를 위해 설계 및 시공기준에 대한 연구를 수행하였다.