• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2012

River is able to change by various environmental factors. In order to conduct river restoration design, it is necessary to evaluate the stable channel through the analysis of past and present river channels. River evaluation requires various data, such as geometry, hydraulic and hydrology, but there is a lot of difficulty to understand topographical information of river change on time and space due to a lack of past data by domestic conditions. This study was analyzed abandoned channel formation, changes in the vertical-section and cross-section length of rivers, and micro-landform changes etc using an image analysis technique. Purpose of this research is to evaluates the stable channel through a river channel morphology change from past and present river channels image. Mangyoung river was conducted artificial river maintenance through straight channel consolidation form 1920 to 1930 year. In the result river maintenance, mangyoung river length was decreased by 15 km and abandoned channels of six points were made. Since then, weir was continuously increased to control bed slope and use water. Install of weir was to be the reason of changes on channel width, thalweg, vegetated bar, sand bar, water area. Present Mangyoung river show that water area was temporary increased in upper and middle reach because of weir installation. Total sand bar was only decreased in upper channel. The change of vegetated bar and sand bar was slight recently. In this result, Mangyoung river is inferred to reach stabilized channel although there is some difference to the lower reach.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.386-386
• /
• 2012

For white light emitting diode (LED) applications, it has been reported that Y3Al5O12:Ce3+ (YAG:Ce) in nano-sized phosphor performs better than it does in micro-sized particles. This is because nano-sized YAG:Ce can reduce internal light scattering when coated onto a blue LED surface. Recently, there have been many reports on the synthesis of nano-sized YAG particles using bottom-up method, such as co-precipitation method, sol-gel process, hydrothermal method, solvothermal method, and glycothermal method. However, there has been no report using top-down method. Top-down method has advantages than bottom-up method, such as large scale production and easy control of doping concentration and particle size. Therefore, in this study, nano-sized YAG:Ce phosphors were synthesized by a high energy beads milling process with varying beads size, milling time and milling steps. The beads milling process was performed by Laboratory Mill MINICER with ZrO2 beads. The phase identity and morphology of nano-sized YAG:Ce were characterized by X-ray powder diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. By controlling beads size, milling time and milling steps, we synthesized a size-tunable and uniform nano-sized YAG:Ce phosphors which average diameters were 100, 85 and 40 nm, respectively. After milling, there was no impurity and all of the peaks were in good agreement with YAG (JCPDS No. 33-0040). Luminescence and quantum efficiency (QE) of nano-sized YAG:Ce phosphors were measured by fluorescence spectrometer and QE measuring instrument, respectively. The synthesized YAG:Ce absorbed light efficiently in the visible region of 400-500 nm, and showed single broadband emission peaked at 550 nm with 50% of QE. As a result, by considering above results, high energy beads milling process could be a facile and reproducible synthesis method for nano-sized YAG:Ce phosphors.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.51-56
• /
• 2015

It has been used various pad finish materials to enhance the reliability of solder joint and recently Electroless Ni Electroless Pd Immersion Gold (the following : ENEPIG) pad has been used more than others. This study is about reliability according to being used in commercial Electrolytic Ni pad and ENEPIG pad, and was observed behavior of various Cu contents. After reflow, the inter-metallic compound (IMC) between solder and pad is composed of $Cu_6Sn_5$ (Ni substituted) by using EDS, and in case of ENEPIG, between IMC and Ni layer was observed the dark layer ($Ni_3P$ layer). Additional, it could be controlled the thickness of dark layer according to Cu contents. Investigated the different fracture mode between electrolytic Ni and ENEPIG pad after drop shock test, in case of soft Ni, accelerated stress propagated along the interface between $1^{st}$ IMC and $2^{nd}$ IMC, and in case of ENEPIG pad, accelerated stress propagated along the weaken surface such as dark layer. The unstable interface exists through IMC, pad material and solder bulk by the lattice mismatch, so that the thermal and physical stress due to the continuous exterior impact is transferred to the IMC interface. Therefore, it is strongly requested to control solder morphology, IMC shape and thickness to improve the solder reliability.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.35-41
• /
• 2017

One of the most important species, Brassica rapa encompasses a variety of commercial vegetables, such as the Chinese cabbage, pak choi and oilseed crops. The LP08 of yellow sarson (Brassica rapa ssp, tricolaris) have a distinct morphology, with yellow seed color and a unique tetralocular ovary. LP21 of pak choi (Brassica rapa ssp, chinensis) have a dark brown seed color and bilocular ovary. In this study, we generated double haploid plants by crossing the LP08 (maternal variety) and LP21 (paternal variety), using microspore culture. A total of 66 accessions with various morphological characteristics were used for content analysis of flavonoids. The three flavonoids, quercetin, naringenin and kaempferol, showed differing contents in the two crossing parents. The Chinese cabbage type 'Chiifu' was used as the control. The highest accumulation of total flavonoids was observed in LP08. The lowest mean total flavonoids were found in 'Chiifu'. Among the 66 DH accessions, the quercetin contents of 18 accessions showed higher content than LP08. Kaempferol content was also high, and was found to be 79.7% of the total flavonoid content. Naringenin content was low at 2.8%, and was not detected in 22 accessions. Interestingly, the quercetin content positively correlated with the kaempferol content. These results can be used to identify genetic locus and genes related to useful traits. Phenotypic analysis of 66 DH accessions can further be used for natural selection of good breeding materials in B. rapa.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.709-714
• /
• 1997

$TiO_2$ hydrate coating on mica in an aqueous solution of $TiOSO_4$ by the hydrolysis using ammonia water studied with emphasis on coating conditions for a uniform coating. For the uniform coating of $TiO_2$ film on mica surface, it was found that smaller mica particles were coated more uniformly compared to larger particles. It was necessary to suppress the rate of formation of hydrated $TiO_2$ particles in solution, which were deposited on mica and generate irregular coating. It was also necessary to control precipitation yield by varying the reaction temperature to obtain uniform coating. More uniform coating was obtained with higher precipitation yield. A uniform dense film was formed when mica particles of average size of $14.7{\mu}m$ is used for mica slurry solution, of which pH is 2.5, and the factor of acidity of $TiOSO_4$ solution is 291, and the solution was kept at $80^{\circ}C$ for 3 hours. The morphology of $TiO_2$ film formed on mica was little affected by firing at $900^{\circ}C$.

• Journal of Acupuncture Research
• /
• v.26 no.5
• /
• pp.65-75
• /
• 2009

Objectives : Pyrite is one of the important prescriptions that has been used in oriental medicine for healing of fracture. It is reasonable, therefore, to postulate that native copper affects the process of bone metabolism and bone formation. The purpose of this study is to discover the effect of Pyrite on the healing of tibia fracture. Methods : 1. In vitro test : MG-63 cell in human body and the Pyritum in the ratio of 0.5mg/ml, 1.0mg/ml, 1.5mg/ml, 2.0mg/ml were incubated for 24 hours. After 24 hours, RNA was extracted via trizol reagent (Sigma, USA). In order to understand the activation of osteoblast, the level of OPN mRNA, osteopontin, was measured. 2. In vivo tesgroups normal group, control group and experimental group. Left tibia bones of mice in CON and JT groups were fractured by bone cutters. Pyrite was orally administered to the experimental group. After 14 days, each group's tibia specimen was constructed to observe changes in activation of proinflmmatory cytokines in relation to MIF and IL-6. Also, proliferation of osteoblast and osteopontin were measured via changes in levels of OPN and OPN mRNA. Results : In jn-Titro test, the level of OPN mRNA, osteopontin production was remarkably increased in Pyritum-treated MG-63 cells. In in-vitro test, fractured area in external tibia morphology was increased more in the JT group than that of the CON group. Osteogenesis, endochodrial ossification, and osteoid in fractured area were also increased more in the JT group than that of the CON group. Increase in OPN mRNA, osteopontin level and osteoblast's proliferation were observed. Activation of MIF and IL-6 was confirmed from the fracture region. Conclusions : From the result, development of a new stimulator in healing fracture via pyrite is expected.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.303-308
• /
• 2016

To investigate the effect of calcium chloride ($CaCl_2$) using for deicing salts in winter on gas exchange and stomatal responses of 3-year-old Prunus serrulata, we treated twice (1 L) $CaCl_2$ solution (0.5%, 1.0% and 3.0%) in the root zone before leaf unfolding. Stomatal conductance ($g_s$), photosynthetic rate ($P_n$), transpiration rate ($T_r$) and water use efficiency (WUE) in the leaves of P. serrulata were decreased with increasing of $CaCl_2$ concentration. Even though stomatal conductance and photosynthetic rate were reduced by $CaCl_2$, intercellular $CO_2$ concentration ($C_i$) in $CaCl_2$ treatments has similar or higher values compared with control. These results suggest that non-stomatal limitation as well as stomatal limitation induced the reduction of photosynthetic rate together. On the other hands, treatment of $CaCl_2$ before leaf unfolding also affected leaf morphology traits. We proposed that reductions of stomatal length and leaf size and high pore density with increasing salinity is adaptative mechanism to reduce the water loss in plant.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Toxicological Research
• /
• v.14 no.3
• /
• pp.379-384
• /
• 1998

Endocrine disruptor is an exogenous substance that changes endocrine function and causes adverse effects at the level of the organism, its progeny, and/or (sub)populations of the organisms. Purported adverse effects are cancers, declines in reproductive health, developmental learning disabilities in humans, and declining populations, altered morphology, physiology or behavior in wildlife. In these days, expert groups on chemicals in IPCS, IFCS and OECD are intensively discussing the identification of endocrine disruptors and the proper management of those chemicals. In this study, we screened the endocrine disrupting effects of lead using fertilized eggs of Oryzias latipes. In brief, the eggs were exposed to lead with different concentrations at Ringer's solution, and the mortality, the incidence of deformation, the body movement and the hatching success were determined after incubation. The histological analysis of normal and deformed larvae was also carried out. Compared to control, the mortality and the heart rate of eggs and/or larvae increased, but the hatching success and the tail movement decreased. The morphological observation showed the asymmetrical deformation of larvae and the distortion of spinal cord. The absorption of the liquid in yolk sac was hindered. The adverse effects of lead in the ontogeny of fertilized eggs of Oryzias latipes seemed to be stronger in pH5.6 than in pH7.5 solution. In summary, lead showed adverse effects on the ontogeny of fish fertilized eggs plays critical role in regulating biological systems and controlling developmental processes as an endocrine disruptor.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.6
• /
• pp.1383-1392
• /
• 2003

Apoptosis is a morphologically and biochemically district form of cell death that occurs in many different cell types in a wide variety of organisms. Albizzia julibrissin belonging the family Leguminosae has been used for the treatment of contusion, sore throat, amnesia, and insomnia in oriental traditional medicine. This study investigates whether the water extract of A. julibrissin induce apoptotic cell death in Jurkat T-acute lymphoblastic leukemia (ALL) cells. Jurkat cells were increased inhibitions of cell viability in a concentration-dependent manner by A. julibrissin. This herbal medicine also caused apoptosis as measured by cell morphology and DNA fragmentation. The capability of A. julibrissin to induce apoptosis was associated with proteolytic cleavage of specific target proteins such as poly (ADP-ribose)polymerase (PARP) and beta-catenin proteins suggesting the possible involvement of caspases. Our result showed that Bcl-2 and Bax protein levels were not changed in all A. julibrissin-treated groups compared to control group. These results suggest that A. julibrissin-mediated apoptosis is independent with Bcl-2 related signaling pathway in this cells. The purpose of the present study is also to investigate the Effect of A. julibrissin on cell cycle progression. Our results showed that G1 checkpoint related gene products (cyclin D1, cyclin dependent kinase 4, retinoblastoma, E2F1) were decreased in their protein levels in a dose-dependent manners after treatment of the extract. These results indicate that the increase of apoptotic cell death by A. julibrissin may be due to the inhibition of cell cycle progression in wild type p53-lacking Jurkat cells.