• 한국버섯학회지
• /
• 제18권1호
• /
• pp.100-106
• /
• 2020

본 연구는 국내외 수집 균주를 대상으로 균주의 배양적 특성과 유전적 유연관계 및 균주별 함유된 베타글루칸의 함량을 분석하였다. 곰보버섯은 생장온도 25℃, pH 7.0에서 균사 생장이 가장 왕성하였다. 균사는 초기에 백색에서 생장이 진행될수록 진한 노란색을 띠다 진한 갈색으로 변화하는 공통적인 특징을 가지고 있었으며, 곰보버섯만의 고유한 배양적 특징으로 균사가 종에 따라 주기별로 경화되는 특징과 특유 강한 향이 있다는 것을 확인할 수 있었다. 균사 형태는 관찰을 통하여 총 5종류로 분류되었고 이들 균주의 ITS 분석 결과 Morchella conica, M.sextelata, M. importuna, M. esculenta, M. carssipes 등 5종으로 동정되었다. UFPF primer를 이용하여 PCR 다형성을 분석한 결과 ITS 분석 결과와는 다르게 M. conica로 동정된 KMCC04971 균주와 M. sextelata로 동정된 KMCC04407 균주는 동일한 패턴을 보였으며 그 결과 4개의 그룹으로 분류할 수 있었다. 균주별 균사체 베타글루칸 함량 분석 결과 M. importuna인 KMCC04973 균주가 100 g당 알파글루칸 16.4 g을 포함하는 베타글루칸 함량 33.1 g으로 가장 높았다.

• 천문학회지
• /
• 제21권1호
• /
• pp.1-36
• /
• 1988

The temperature calibration of stars by photometric parameters and spectral type is discussed, using the catalogue data of Cayrel de Strobel et al. (1985) and Morel et al. (1976). The H-R diagrams and the mass-luminosity relation of stars in this catalogue are presented in the [log(L/M)-log $T_e$]-and [$M_{bol}$-log(L/M)]-planes, respectively, discussing the age of main sequence (MS) stars and giant stars. The age-metallicity relation of the nearby stars suggests the initial rapid enrichment of metal abundance.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.247-248
• /
• 2000

• 방송공학회논문지
• /
• 제10권3호
• /
• pp.383-391
• /
• 2005

본 논문은 블록DCT(Discrete Cosine Transform) 기반의 영상 압축 과정에서 발생하는 블록효과(block artifact)를 제거하기 위해 ALM(Alvarez, Lions, and Morel) 확산 모델에 기반을 둔 새로운 이방성 확산(anisotropic diffusion)을 제안한다. 등방성 확산은 평탄 영역에 나타나는 블록 경계를 제거하는 역할을 하는 반면, 이방성 확산은 윤곽선 영역이나 텍스쳐 영역을 보존하는 역할을 하기 때문에, 제안된 확산 모델은 블록 효과를 제거하면서 윤곽선(edge)을 보존하기 위해 등방성 확산(isotropic diffusion)과 이방성 확산의 비율을 제어하는 확산비율 조절 매개 변수(RCP : rate control parameter)가 제안 되었다. 또한, 텍스쳐 영역의 과도한 평탄화를 막기 위해 속도 매개 변수(SAP : speed control parameter)를 고안하였으며, 이는 텍스쳐 영역의 확산 속도를 감소시기는 역할을 한다.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.561-569
• /
• 2017

Power converter design requires simulation accuracy. In addition to the requirement of accurate models of power semiconductor devices, this paper highlights the role of considering a very good description of the converter circuit layout for an accurate simulation of its electrical behavior. This paper considers a simple experimental circuit including one switching cell where a MOSFET transistor controls the diode under test. The turn-off transients of the diode are captured, over which the circuit wiring has a major influence. This paper investigates the necessity for accurate modeling of the experimental test circuit wiring and the MOSFET transistor. It shows that a simple wiring inductance as the circuit wiring representation is insufficient. An adequate model and identification of the model parameters are then discussed. Results are validated through experimental and simulation results.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.361-371
• /
• 1983

The turbulent structures of the free plane jet and two dimensional impinging jet are investigated experimentally. In order to get the two dimensional jet, the contour of the cubic equation suggested by Morel is used for a contracting nozzle. A linearized constant-temperature hot-wire anemometer is used for measurement. Mean velocities and turbulent intensities are measured along the centerline of the jet. Jet halp width spatial double velocity correlation coefficients and integral length scales are obtained. It is established that the free plane jet is truly self-preserving about 40 slot widths downstream of the nozzle. The experiments for the impinging jet are carried out at four different impingement wall locations within the self-preserving region of the free plane jet, and comparing the results with that of free plane jet, the mean velocity is changed in the region of 0.25H and turbulent intensities are affected in the region of 0.2H from the wall, respectively, where H means the distance between the nozzle exit and the wall.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.89-94
• /
• 1995

A16061, SB41 and SM45C was used for developing tool wear monitoring system in face milling. First of all, Neural networks of which input are 8 $_{th}$ order AR morel parameters, frequency band energies, cutting conditions was used to monitor tool wear for each material. Finally, A unified neural network, which has tensile strengths of each material as an additional input, was constructed to consider the effect three materials on the features of tool wear. It was verified that tensile strength is the one of properties of workpiece materials.s.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.357-357
• /
• 2006

Many industrial sources of proteins can be used as raw materials to produce films, molded materials, and various hollow items either by "casting" techniques or by "thermoplastic processing". Combining proteins with natural fibbers, paper or biodegradable polyesters is very promising to form biodegradable composites witch take advantage of the barrier and mechanical properties of each component. Using nano-fillers to form nanocomposites has also been shown to be interesting to improve properties. Production, with low transformation cost, of protein based materials to form biodegradable materials with controlled functional properties for food uses, medical uses, packaging, agriculture, controlled release systems, etc. is discussed.

• 대한원격탐사학회지
• /
• 제20권5호
• /
• pp.289-305
• /
• 2004

Atmospheric correction of Landsat Visible and Near Infrared imagery (VIS/NIR) over aquatic environment is more demanding than over land because the signal from the water column is small and it carries immense information about biogeochemical variables in the ocean. This paper introduces two methods, a modified dark-pixel substraction technique (path--extraction) and our spectral shape matching method (SSMM), for the correction of the atmospheric effects in the Landsat VIS/NIR imagery in relation to the retrieval of meaningful information about the ocean color, especially from Case-2 waters (Morel and Prieur, 1977) around Korean peninsula. The results of these methods are compared with the classical atmospheric correction approaches based on the 6S radiative transfer model and standard SeaWiFS atmospheric algorithm. The atmospheric correction scheme using 6S radiative transfer code assumes a standard atmosphere with constant aerosol loading and a uniform, Lambertian surface, while the path-extraction assumes that the total radiance (L/sub TOA/) of a pixel of the black ocean (referred by Antoine and Morel, 1999) in a given image is considered as the path signal, which remains constant over, at least, the sub scene of Landsat VIS/NIR imagery. The assumption of SSMM is nearly similar, but it extracts the path signal from the L/sub TOA/ by matching-up the in-situ data of water-leaving radiance, for typical clear and turbid waters, and extrapolate it to be the spatially homogeneous contribution of the scattered signal after complex interaction of light with atmospheric aerosols and Raleigh particles, and direct reflection of light on the sea surface. The overall shape and magnitude of radiance or reflectance spectra of the atmospherically corrected Landsat VIS/NIR imagery by SSMM appears to have good agreement with the in-situ spectra collected for clear and turbid waters, while path-extraction over turbid waters though often reproduces in-situ spectra, but yields significant errors for clear waters due to the invalid assumption of zero water-leaving radiance for the black ocean pixels. Because of the standard atmosphere with constant aerosols and models adopted in 6S radiative transfer code, a large error is possible between the retrieved and in-situ spectra. The efficiency of spectral shape matching has also been explored, using SeaWiFS imagery for turbid waters and compared with that of the standard SeaWiFS atmospheric correction algorithm, which falls in highly turbid waters, due to the assumption that values of water-leaving radiance in the two NIR bands are negligible to enable retrieval of aerosol reflectance in the correction of ocean color imagery. Validation suggests that accurate the retrieval of water-leaving radiance is not feasible with the invalid assumption of the classical algorithms, but is feasible with SSMM.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.567-573
• /
• 2008

This experiment examined the effect of dietary spray-dried bovine colostrum on intestinal histology and organ weights in early-weaned pigs. In a randomised complete block design, twelve 14-day-old weaner pigs were offered a diet containing either 5% spray-dried bovine colostrum or no colostrum (control). Diets were formulated to contain 14.8 MJ/kg DE, 1.26% available lysine and to meet or exceed requirements for other nutrients. Piglets were offered the diets for a period of 14 days. No effect of diet on growth rate or feed intake was observed (p>0.10). Small intestine weight was reduced by 12% in piglets consuming dietary bovine colostrum (p< 0.05). Villous height and crypt depth were increased and decreased, respectively, in the proximal jejunum, mid jejunum and distal ileum of pigs consuming dietary bovine colostrum (p<0.05). Mid-jejunal lamina propria $CD4^+$ and $CD8^+$ T lymphocyte density was increased by 28 and 37%, respectively, in piglets consuming dietary bovine colostrum (p<0.05). Diet did not affect thickness of tunica muscularis externa or tunica submucosa (p>0.10). Collectively, these results suggest a positive effect of dietary bovine colostrum on intestinal morphology and immune status in early-weaned pigs.