• 한국항해항만학회지
• /
• 제43권5호
• /
• pp.310-319
• /
• 2019

With the recent increase in the volume of liquid cargo transportation, there is a need for STS( Ship To Ship) globally. In the case of the STS mooring, the safety assessment should be conducted according to other criteria because mooring is different from the general mooring at the quay, but there is no separate standard in Korea. Thus in this study, STS mooring simulation and sensitivity analysis using OPTIMOOR program, the numerical analysis program, was conducted to identify the characteristics of the STS mooring. The target sea modeled the Yeosu port anchorage in Korea and the target ship was selected as the case of VLCC (Very Large Crude Oil Carrier)-VLCC. Through the numerical simulation and sensitivity analysis, the characteristics of STS mooring were identified. Also based on these results, we focused on establishing the standard for STS mooring safety assessment. Numerical simulation results show that the STS mooring safety can be changed according to a ship's cargo loading condition, pre-tension of mooring line, sea depth, encounter angle with the weather, and the weather condition. Additionally, the risk matrix is prepared to establish the safe external force range in the corresponding sea area. This result can be used to understand the mooring characteristics of STS and contribute to the revision of mooring safety assessment criteria.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.14-21
• /
• 2013

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.48-54
• /
• 2011

Structural modifications of a ship may cause a fatal accident such as sinking and wrecking of ship. Especially, barge ship can be easily reconstructed to load more bulk cargo. In this study, for a real accident case, change of mooring force due to structural modification was analyzed to evaluate accident risk. A two dimensional dynamic model for the barge ship was constructed to compute mooring forces with related to floating motion. The equation of motion was established in Matlab code and buoyancy was calculated by using direct integration of submerged volume. The results showed that wind force, current force, and mooring force after rebuilding was approximately 4.3 kN, 14 kN, 1,561 kN respectively. The maximum force of mooring force according to the length of mooring cable were 1,614 kN at 30 m of mooring cable. Thus, an arbitrary modification of ship lead instability and unreliable result so that illegal rebuilding of ship should be avoided.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.94-99
• /
• 2013

This paper presents some experimental results about Position Mooring (PM) system applied to the barge ship. In PM operation, the station keeping in surge, sway of vessel is provided by the mooring system. In this paper, a system, consisting of a barge vessel and mooring lines, is mathematically modeled. The position and orientation of vessel is controlled by changing the tensions in the mooring lines. The PID control strategy is applied to evaluate the efficiency of proposed system. Experimental result which corresponds to the applied control strategy is presented and discussed.

• 한국항해항만학회지
• /
• 제42권6호
• /
• pp.388-394
• /
• 2018

선박이 계류삭을 이용하여 부두에 접안하는 경우, 과도한 선박 속력은 계류삭이 절단되는 사고를 야기할 수 있다. 이러한 계류삭의 파단 사고를 방지하기 위해서는 계류삭 파단 방지에 선박의 한계치 접안 속력을 알아야 한다. 본 연구의 목적은 계류삭 파단을 방지하기 위한 선박의 한계치 접안 속력 추정에 있다. 본 연구의 핵심은 선박의 속력을 모르는 경우 선박제원과 계류삭 제원을 이용하여 접안 시 한계치 접근 속력을 추정하는 방법이다. 본 연구에서는 선체저항과 계류삭의 탄성력 등에 관한 이론을 바탕으로 한계치 접안 속력의 추정 방법과 절차를 제안하였다. 135K LNG 선박과 IWRC, $6{\times}36$의 강선 계류삭을 대상으로 한계치 접안 속력을 추정한 결과, 추정한 접안 속력으로 접안하는 경우 계류삭이 파단이 되지 않는 것으로 분석되어 제안한 방법이 유효함을 알았다. 본 연구에서 제안한 방법은 실제 선박에서 계류삭 파단을 방지하는데 기여할 수 있을 것으로 기대된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.135-137
• /
• 2019

최근 액체화물운반선 운송량이 증가함에 따라 국내외에서 해상환적(Ship-to-ship)에 대한 필요성이 대두되고 있다. STS 계류의 경우, 일반적인 부두에서의 계류와 그 특성이 다르기 때문에 다른 기준으로 안전성 검토가 이루어져야 하지만, 국내에서는 별도의 기준이 부재한 상황이다. 따라서 본 연구에서는 STS계류의 특성을 파악하기 위해 상용 수치해석프로그램인 OPTIMOOR 프로그램 이용한 STS 계류 시뮬레이션 및 민감도 분석을 시행하였다. 대상해역은 여수항의 D2 정박지를 모델링하였으며, 대상 선박의 모델링은 VLCC-VLCC의 Case로 선정하였다. 이 수치해석과 민감도 분석을 통하여 STS 계류의 특성을 파악하고자 하였으며 이를 바탕으로 STS 계류안전성 평가에 대한 기준을 확립하고자 하였다. 수치해석 시뮬레이션 결과, STS 계류는 선박 재화상태, 기상상태(파주기 및 파고영향) 및 만남각, 그리고 계류삭의 초기장력 등에 따라 변화함을 확인하였다. 또한 Risk Matrix를 작성하여 해당 해역에서의 안전외력범위를 설정하였다. 이 결과를 통해 STS의 계류 특성을 파악할 수 있으며, 계류안전성 평가 기준을 개정에 기여할 수 있을 것으로 기대한다.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.373-383
• /
• 2000

The ship’s safe mooring stability is a principles for the safe cargo handling works at the mooring berth. Today numerous standards, guidelines and recommendations concerning mooring practices, fittings and equipments exist throughout the worldwide maritime industries. In recently, the mooring facilities were constructed as dolphin types at the open sea area apart far from shoreside instead of enclosed coastline area in accordance with increasing ship’s size and for preventing environmental pollution. Therefore the exciting wave condition must be considered as a basic environmental criteria with the wind force and current force for all of the mooring ships at the sea berth facilities. In this study, this added wave force as one of the environmental external forces by using the theoretical formula was applied to the LNG ship in Pyeongtaeg harbor needed the special mooring stability of the sea berth. Through this research, it can be confirmed that wave force is the very important factor in the mooring force and the strength of wave force works much more in the full laden condition than in the lightship condition. And also the wave force changes to non-linear states according to the wave frequency and wave length. In addition, the maximum limit criteria of environmental force of prohibiting the entering ship on the berth and loading works controlled by the port authority concerned of Pyeongtaeg port fully satisfies the condition of the mooring limit force recommended by OCIMF that the safe permitted force of the mooring line have to be within 55 % of MBL.

• 수산해양교육연구
• /
• 제29권2호
• /
• pp.415-421
• /
• 2017

This study is aiming to find one of working conditions for loading and unloading a large ship at game port. Firstly, for dynamic analysis of the moored ships, the motion characteristics of ship according to loading condition are figured out. The motion characteristics of ship is related to environmental factors such as current, wind, mooring line, fender and etc. As a result, it is ascertained through numerical simulation using the AQUA MARINE developed by ANSYS INC. This study might contribute to make a new method of mooring stability of target ship.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.16-21
• /
• 2013

In this paper, the mooring system for a floating wave energy farm is designed based on a two-dimensional analysis. The mooring system uses an anchorless mooring line linking two floaters in a floating wave energy farm. The basic equation to determine the length of the mooring line between the two floaters is proposed. The other properties such as the diameter and pretension are taken from the mooring line for a single floater. The dynamic behavior and safety of the designed mooring system under extreme ocean conditions are analyzed with the commercial software Orcaflex. A numerical study shows the stability and high safety in tension of the designed mooring lines for a floating wave energy farm. The proposed anchorless mooring system for a floating wave energy farm results in a considerable reduction in the length of the mooring line, contributing to the economics of a floating wave energy farm.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.22-26
• /
• 2013

The purpose of this study was to improve the design of a mooring line by attaching a lumped mass to it on the seabed. A numerical analysis of the redesigned mooring system is performed to analyze the effect of the weight of the attached lumped mass using the commercial software Orcaflex. The ultimate tension of the mooring system with the lumped mass is compared with that of a bare mooring line in the original design. An appropriately designed weight for the lumped mass is found to induce a critical lifted point in the mooring line by floater motion in the ultimate condition to move toward the floater position from the anchor point, while maintaining a similar safety factor for the mooring line. On the other hand, it is shown that excess weight for the lumped mass induces snapping in a mooring line, resulting in low safety factor for the mooring system. The distance between lumped weights is shown to be a minor parameter affecting the safety of a mooring line, although a shorter line has an advantage from an economic point of view. Using the optimal weight for the lumped mass attached to the mooring line on a seabed reduces the mooring line length and installation area occupied by a mooring system under real sea conditions.