• ETRI Journal
• /
• v.35 no.4
• /
• pp.718-721
• /
• 2013

This letter proposes a novel calibration method for a multiport amplifier (MPA) to achieve optimum port-to-port isolation by correcting both the amplitude and phase of the calibration signals. The proposed architecture allows for the detection of the phase error and amplitude error in each RF signal path simultaneously and can enhance the calibrated resolution by controlling the analog phase shifters and attenuators. The designed $2{\times}2$ and $4{\times}4$ MPAs show isolation characteristics of 30 dB and 27 dB over a frequency range of 19.5 GHz to 22.5 GHz, respectively.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.147-149
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.301-306
• /
• 1996

To predict the average liquid level under the condition of the countercurrent stratified two-phase flow in a pipe, an analytical model has been suggested. This is made by introducing the interfacial level gradient into the liquid-phase and the gas-phase momentum equations. The analytical method for the gas-phase pressure drop calculation with f$_i$ $\neq$ f$_G$ has also been described using the liquid level prediction model developed in the present study.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.4
• /
• pp.158-160
• /
• 2004

BiSrCaCuO thick films were fabricated by plasma enhanced chemical vapor deposition, and the crystallinity and the superconducting properties were investigated. The superconductivity was achieved at 20 K with an onset temperature of around 90 K in the film prepared at 72$0^{\circ}C$. From X ray diffraction analysis, the main superconducting phase in the films was the low Tc phase at 700∼75$0^{\circ}C$ and the high Tc phase at 750 ∼ 80$0^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.799-804
• /
• 1989

A new method for measuring optical phase changes of reflection beam from optical mirror is proposed. The optical phase change is liable to change with varying atmosphere conditions. This optical phase changes are measured against air pressure, temperature, humidity and CO$\_$2/ concentration variations. It is clarified that the optical phase changes are most effected by humidity change.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.251-255
• /
• 2009

In the non-contact 3-dimensional (3D) shape measurements, the fringe pattern projection method based on the phase-shifting technique has been considered very effective for its high speed and accuracy. The digital fringe projector in particular has great flexibility in generating fringe patterns since the patterns can be controlled easily by the computer program. In this work, we have developed a high-speed digital laser grating projection system using a laser diode and a polygon mirror, and evaluated its performance. It has been demonstrated that all the optical measurements required to find out the profile of a 3D object could be carried out within 31 ms, which confirmed the validity of our 3D measurement system. The result implies the more important fact that the speed in 3D measurement can be enhanced remarkably since, in our novel system, there is no device like a LCD or DMD whose response time limits the measurement speed.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.252-256
• /
• 2008

We investigated phase separation by adding different concentrations of MTBE, to the mixtures of naphtha, ethanol and water. The phase separation temperatures of the Naphtha-Ethanol-Water solutions have dropped when the concentration of MTBE increases more. When adding IPA and IBA to the solutions of Gasoline-Ethanol and Gasoline base-Ethanol individually, IBA shows lower temperatures of phase separation than IPA, and it shows synergistic effect when mixtures of IPA and IBA is applied.

• ETRI Journal
• /
• v.23 no.4
• /
• pp.199-201
• /
• 2001

The phase noise reduction in a configuration of the HEMT oscillator with a dielectric resonator coupled by a quarter-wavelength impedance inverter is investigated. Two HEMT oscillators for a satellite payload system are manufactured in the same configuration except for the coupling configuration of the dielectric resonator (DR) in order to empirically demonstrate the phase noise reduction. Experimental result shows that a phase noise reduction by 14 dB can be enhanced by increasing the characteristic impedance of a coupling microstrip impedance inverter.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.5-9
• /
• 1989

In this paper, while 2-or 3-phase induction motor is driven with balance and no noise driving at dynamic and steady state condition. Single-phase induction motor is driven with pulsating torque except specific driving point. So we analyze the reason of producing pulsating torque with the view of unsymmetring concept. These results are applied to the design of high efficincy, high quality single-phase induction motor.

• Journal of the Korean earth science society
• /
• v.29 no.1
• /
• pp.60-77
• /
• 2008

We investigated the textbook model explaining a phase of the Moon and compared it with student models at the secondary levels in Korea. 20 high school students and 36 middle school students from suburb area participated in this study. Participants were interviewed to explain understandings about the cause of the Moon's phase with drawing their models. The results of this study showed that the textbooks now in use explain the phase of the Moon with one unique scientific model, while students displayed 6 different kinds of models including the scientific model. Furthermore the students tend to have comparatively scientific model modes as their grades increase and their scholastic ability levels become higher. Although the students have learned the Moon's phase in school, they still have alternative models because the textbook does not explain enough for the students to overcome their alternative conceptions. In the textbook, the model presented without explanation of the limitation of the model, so there can be a gap between the model in the textbooks and the models in the mind of students. With these findings, we propose complementary models for helping secondary school students to develop their understanding of moon phases.