• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.125-131
• /
• 2011

The characteristics of radio-frequency/vacuum drying Japanese larch boxed heart round logs with 150 mm and 210 mm in diameter and 2,500 mm in length, subjected to compressive loading, after the pretreatment of kerf were investigated. The results of this study were as the follows: The drying time of about 120 hours~130 hours was needed from green to about 15 percent of moisture content. The gradient of final moisture content for all specimens was very gentle in both longitudinal and transverse directions owing to dielectric heating. The surface checks seriously occurred although the occurrence extent of surface check for the kerfed specimens was slight compared with that for the control specimens because drying stress was relieved by kerf. The occurrence of surface checks for the L-specimen was more serious than that for the S-specimen.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.907-915
• /
• 2015

The tap water is generally known to be corrosive in the pH range at 6.5 ~ 7.5. And the degree of corrosion varies depending on the types of raw water such as river surface water or lake water of the dam. Although several corrosion index represents the corrosivity of tap water, the typical corrosion indexes such as Langelier saturation index (LI) and calcium carbonate precipitation potential (CCPP) were calculated to monitoring the corrosive water quality about raw and tap water in water distribution system. To control the corrosive water quality, the correlation between corrosion index and water quality factors were examined. In this study, corrosion index (LI, CCPP) and the pH was found to be most highly correlated.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.36-40
• /
• 2007

Inorganic layers, such as SiOxNy and SiOx deposited using plasma sublimation method, were tested as passivation layer for organic thin-film-transistors (OTFTs). OTFTs with bottom-gate and bottom-contact structure were fabricated using pentacene as organic semiconductor and an organic gate insulator. SiOxNy layer gave little change in characteristics of OTFTs, but SiOx layer degraded the performance of OTFTs severely. Inferior barrier properties related to its lower film density, higher water vapor transmission rate (WVTR) and damage due to process environment of oxygen of SiOx film could explain these results. Polyurea and polyvinyl acetates (PVA) were tested as organic passivation layers also. PVA showed good properties as a buffer layer to reduce the damage come from the vacuum deposition process of upper passivation layers. From these results, a multilayer structure with upper SiOxNy film and lower PVA film is expected to be a superior passivation layer for OTFTs.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.99-107
• /
• 2000

Through the results of off-gas analysis at 3 sampling points in Plasma Arc Melting vitrification pilot plant, it was evaluated the partitioning of spiked materials in off-gas and the decontamination characteristic of off-gas treatment system. Spiked materials are hazard_us heavy metals(Pb, Cd, Hg), radioactive surrogate(Co, Cs) and radioactive materials($^{60}Co,\;^{137}Cs$). Through the Trial burn tests, Decontamination factor of spiked materials in off-gas treatment system is calculated.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.57-59
• /
• 2001

The restructuring of power industry is still going on all over the world for last several decades. Many kinds of restructuring model has been studied, proposed, and applied. Among those models, power pool is more popular than others. This paper assumes the power pool market structure having competitive generation sector and a new method is presented to build bidding strategy in that market. The utilities participating in the market have the perfect information on their cost and price functions, but they don't know the strategy to be chosen by others. To define one's strategy as a vector, we make utility's cost/price function into discrete step function. An utility knows only his own strategy, so he estimates the other's strategy using stochastic methods. For considering these conditions, we introduce the Bayesian rules and noncooperative game theory concepts. Also additional assumptions are included for simplification of solving process. Each utility builds the strategy to maximize his own expected profit function using noncooperative Bayesian game. A numerical example is given in case study to show essential features of this approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.344-351
• /
• 2010

In this paper, we developed a green home simulator using LabVIEW for house designers or users to assess energy saving costs in an easy and direct way. The LabVIEW simulator has a strong graphic user interface, which is intuitive to general users. Therefore, the developed simulator enables one to gather information on electric power consumed in its house and to calculate efficiency for installing green energy generators such as solar and wind power generators. As an actual application, we simulate and compare the efficiencies of installing green energy generators at various cities and seasons using the developed LabVIEW simulator. The simulation results confirm that energy saving effects of green energies are easy to calculate by the proposed green home simulator.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.636-646
• /
• 2009

A series of the noble palladium complexes containing $\beta$-ketoiminate ligands with internal bases, [Pd(${\eta}^3$-allyl)($\beta$- ketoiminate)], [Pd(Me)($PPh_3$)($\beta$-ketoiminate)] and [Pd(Me)($\beta$-ketoiminate)], have been successfully prepared. Crystallographically determined structures showed that these complexes are distorted square planar and pendant bases of the $\beta$-ketoiminate ligands fail to coordinate to the metal in the first two classes of complexes while bases do coordinate in the 3rd class complexes. These complexes are active towards norbornene polymerization on activation with $H(OEt_2)_2BAr^'_4$ (Ar' = 3,5-bistrifluoromethylphenyl) and modified methylalumioxane (MMAO). MMAO is more efficient for the activation for polymerization. Generally, the polymerization activity increases with the following order; [Pd(allyl)($\beta$-ketoiminate)] < [Pd(Me)($PPh_3$)($\beta$-ketoiminate)] < [Pd(Me)($\beta$-ketoiminate)].

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.9
• /
• pp.614-619
• /
• 2010

Recently, a problem related to the thermal management in portable electronic and telecommunication devices is becoming issued. That is due to the trend of a slimness of the devices, so it is not easy to find the optimal thermal management solution for the devices. From now on, a pressed circular type cooling device has been mainly used, however the cooling device with thin thickness is becoming needed by the inner space constraint of the applications. In the present study, the silicon flat plate type cooling device with the separated vapor and liquid flow path was designed and fabricated. The normal isothermal characteristics created by vapor-liquid phase change was confirmed through the experimental study. The cooling device with 70 mm of total length showed 6.8 W of the heat transfer rate within the range of $4{\sim}5^{\circ}C/W$ of thermal resistance. In the future, it will be possible to develop the commercialized cooling device by revising the fabrication process and enhancing the thermal performance of the silicon and glass cooling device.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.196-201
• /
• 2007

As the demand for the lap-top computer has been increased, most users ask quiet environment to work comfortably. Therefore, noise problems of an ODD are of great interest. For the high speed ODD, the flow induced noise is caused by the turbulent flow[1], which is known to be a major source of overall noise of a slim type ODD. In this study, we introduce a new attempt to reduce the noise level using the concept of Helmholtz resonator[2].The experimental analysis is carried out for several cases at different resonance frequencies and different hole patterns. The results show reductions in the noise level from the acoustic noise absorption point of view.

• ALGAE
• /
• v.20 no.2
• /
• pp.113-120
• /
• 2005

The freshwater blooms mainly blue-green algal blooms occur frequently in the lower Naktong River in summer, which provoke many socio-economical problems; therefore, the early detection of bloom events are demanding through the quantitative and qualitative analyses of blue green algal species. The in vivo fluorescence properties of cultured strains of Microcystis aeruginosa, M. viridis, M. wesenbergii, M. ichthyoblabe, Anabaena cylindrica, A. flos-aquae, and Synedra sp. were investigated. Wild phytoplankton communities of the lower Naktong River were also monitored at four stations in terms of their standing stocks, biomass and fluorescence properties compared with its absorption spectram. The 77K fluorescence emission spectra of each cultured strains normalized at 620 nm was very specific and enabled to detect of blue green algal biomass qualitatively and quantitatively. The relative chlorophyll a concentration determined by chlorophyll fluorescence analysis method showed significant relationship with chlorophyll a concentration determined by solvent extraction method ($R^2$ = 0.906), and the blue-green algal cell number determined by microscopic observation ($R^2$ = 0.588), which gives insight into applications to early detection of blue green algal bloom.