• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.960-965
• /
• 2011

This paper presents the mathematical derivation of a maximum likelihood(ML)-based monopulse ratio(MR) curve. The derived form is, with the linear array assumed, shown to be the function of the number of array elements and the elements' spacing. Through some simulations, the acquired form is equivalent to the expected MR curve. Furthermore, we show the form, which consists of several terms, can be simplified by one tangent function.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.363-370
• /
• 2016

This paper proposes a Ku-band multi-mode coupler and its monopulse tracking system, which can be applied to a unmaned aircraft vehicle(UAV) platform. In general, the carrier-to-noise(C/N) level of the beacon signal from a Ku-band commercial satellite is relatively weak compared to that of a military satellite because the Ku-band satellite has been designed for commercial services. Therefore, this paper proposes a coupler and its multi-mode monopulse tracking system satisfying the tracking accuracy under a low C/N environment and analyzes the tracking accuracy. After that, we perform a real satellite tracking test and compare the accuracy of the test with the analysis result before validating the performance of the architecture of the proposed satellite tracking system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.999-1002
• /
• 2017

For a target echo containing interference, it is very difficult to improve the performance of a monopulse radar with spatial domain processing, because the statistical property of interference cannot be exclusively obtained. This paper proposes a monopulse system that has a generalized sidelobe canceller(GSC) filter-based time domain processor as a preprocessor prior to conventional monopulse spatial processing. We analytically show the procedure of time-space signal processing running in the system, and assess its performance through simulation. In particular, the performance dependence on the number of taps in the main channel filter and the estimation error in Doppler frequency are assessed by comparison with those of existing systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.380-386
• /
• 2014

In this paper, a higher-order mode coupler using coaxial-structure waveguide for Ku-band monopulse satellite tracking is proposed. The proposed higher-order mode coupler is built in a coaxial structure for compactness and weight reduction, making it suitable for mobile tracking systems. The inner circular waveguide of coaxial-structure is used to extract the fundamental mode signal and the high-order mode signal is extracted from the four slots of the outer circular waveguide and then transmitted via given stepped rectangular waveguide structure. The simulated results show that proposed higher-order mode coupler covers 250 MHz(12.75 GHz ~ 13.00 GHz) bandwidth with return loss and insertion loss characteristics. The antenna patterns of fundamental mode and higher-order mode applicable to monopulse tracking are generated successfully. Designed higher-order mode coupler using coaxial waveguide structure for Ku-band is expected to be used for high precision monopulse satellite tracking systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.1
• /
• pp.53-64
• /
• 2004

This paper proposes a monopulse beamforming network to estimate a target angle in interference conditions. The proposed system estimates the target direction of arrival (DOA) with two separate beamformings for azimuth and elevation with a planar may. The elevation is extracted from adaptive beamforming in the azimuth direction and the azimuth from adaptive beamforming in the elevation direction. Unlike conventional monopulse beamforming techniques using complex correction formulas or a cascaded architecture of an adaptive array and a mainlobe canceller, the proposed system is very efficient from the computational complexity. The advantage is from fact that the monopulse ratio of the proposed system does not depend on the adapted weights. Moreover, the proposed system can estimate the DOA of the target even for multiple mainlobe interferences since it does not need my kinds of mainlobe maintenance technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.666-674
• /
• 2015

In this paper, we introduce an adaptive phase-comparison monopulse technique for angle estimation of two targets in the same antenna beam. The proposed method determines a more suitable technique(between conventional phase comparison monopulse technique and Zheng's method) based on interference between two targets in Fourier domain. Consequently, regardless of the interference, angles of each individual target can be accurately estimated by means of the proposed method. In simulations, we assumed that two point targets with same velocity are located in the same antenna beam, and the accuracy improvement of the proposed method is verified by using several simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.208-216
• /
• 2002

In this paper, the design method of a waveguide broad-wall longitudinal slot array monopulse antenna of X-type monopulse axes is presented, and the method is verified through manufacture and measurement. In the antenna design of this paper, the antenna size is small and the monopulse axes are X-type. Thus, the common continuous aperture distribution fuction is not suitable and the power balance among antenna quadrants should be considered. Also, since the waveguide height is reduced into 0.1 wavelength, the modelling of the slot characteristics is not simple. Thus, in this paper, the aperture distribution is optimized by using random number, and the balance among the quadrants is achieved by applying the quadrant weighting factor during the aperture optimization process. Also, the moment method procedure is accelerated by applying the interpolation technique to some part of the moment matrix, and the moment method procedure is added to the array synthesis program as a subroutine so that the slot characteristics can be calculated directly when it is required. Based on this method, a antenna of 28dBi is designed and manufactured. It is found that the antenna characteristics is similar to design data.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.137-140
• /
• 2022

In this paper, we proposed a new W-band monopulse tracking system based on reflectarray antenna structure. The proposed reflectarray antenna monopulse tracking system consists of four feed horn antennas and a planar reflector using a microstrip reflectarray. The four feed horn antennas have a gain of 10 dBi and a half-power beam-width of 56 degrees symmetrically in the E/H plane. It was confirmed that the reflectarray antenna using one feed horn antenna has a size of 41.8 × 41.8 mm², a gain of 26.8 dBi, and a half-power beam-width of about 5.6 degrees. The reflectarray monopulse tracking system using 4 feeding horn antennas is well matched from 75 GHz to 90 GHz, and the isolation is secured by more than 10 dB. Finally, the proposed system shows the tracking range of 5.98 degrees and the tracking error range was 0.02 degrees.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.47-53
• /
• 2023

In this paper, We designed a waveguide-type feed structure that converts millimeter wave dual-polarized signals into monopulse signals and presented a manufacturing method. At millimeter-wave such as the W band, the size of the waveguide is very small, making it very difficult to manufacture complex structures. Therefore, because manufacturability is important for the waveguide-type feed structure in the millimeter-wave, electro forming and diffusion bonding were proposed and verified in this study. The designed monopulse feed structure consists of eight 180° hybrids that combine 90° hybrids and self-compensating phase shifters, and four OMTs to separate dual polarization. The designed feed structure was designed to facilitate electro forming and diffusion bonding, and the manufactured feed structure was verified through a network analyzer. It was confirmed that the two proposed production methods produce a monopulse signal well through the measured magnitude and phase of the port.