• 제목/요약/키워드: Monopole Antenna

검색결과 413건 처리시간 0.032초

Ultra Wide-Band용 타원형 모노폴 안테나 설계 (Design of the Elliptic Monopole Antenna for Ultra Wide-Band)

  • 차상진;이현진;임영석
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.442-445
    • /
    • 2003
  • The use of a single UWB antenna which covers a wide range of frequencies is very desirable for future wireless communications system. In this paper, we propose a novel wide band printed elliptic monopole antenna for UWB(Ultra wide Band). Wideband planar monopole disc antenna have been recently studied. The proposed antenna can cover UWB frequencies from 3.5GHz to 12GHz. it is determined from 10dB return loss. The antenna consists of the printed elliptical monopole disc with microstrip-line feed. Elliptic disc of antenna and ground height operate important to matching. The results of measurement are almost similar to those of simulation.

  • PDF

Parametric Studies for the Optimum Design of a Hexagonal Plate Monopole Antenna

  • Park Seong-Bae;Park Joung-Min;Ahn Bierng-Chearl;Kim Kyung-Seok
    • Journal of electromagnetic engineering and science
    • /
    • 제6권1호
    • /
    • pp.53-61
    • /
    • 2006
  • In this paper, we present parametric studies for the optimum design of a hexagonal plate monopole antenna. The dependence of the antenna performance on various geometric parameters is investigated using a commercial electromagnetic software, from which an optimum design of a hexagonal plate monopole antenna is derived. Guidelines for determining initial parameter values are given. The diameter of the circular ground plane is minimized tlo 1/5 wavelength at the lowest operating frequency. The antenna impedance matching is controlled by adjusting the gap between the plate and the ground plane, the plate base width, and the base bevel angle. The antenna proposed in. this paper shows a reflection coefficient less than -10 dB and a $2.0{\sim}6.2$ dBi gain over $3{\sim}20$ GHz frequencies.

PCS 및 IMT-2000 이중대역용 광대역 모노폴 안테나 설계 (The Design of the Broadband Monopole antenna for PCS and IMT-2000 Dual band application)

  • 문정익;박서욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
    • /
    • pp.173-176
    • /
    • 2000
  • In This paper, a novel broadband monopole antenna is investigated experimentally. Our broadband monopole antenna yields the largest bandwidth from 1.72 ∼ 2.2 GHz ( 24.2 % ) for VSWR<1.2 So, this antenna can be designed to extend enough the coverage of dual band(PCS+IMT-2000). The measurements and computations are confirmed to operating of the our broadband antenna, whose electrical characteristics have an attractive feature as handset communication applications.

  • PDF

광대역 모노폴 안테나 설계 (Design of Ultrawide Band Monopole Antenna)

  • 이종필;박성욱
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
    • /
    • pp.136-139
    • /
    • 2001
  • In this paper, we propese a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinarr method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.8%. An antenna gain and a radiation pattern are about 1.7dBi and omni-directional at 1.7 GHz, respeotively.

  • PDF

로딩 코일을 이용한 광대역 슬리브 모노폴 안테나의 설계 (The Design of the Broadband Sleeve Monopole Antenna using loading Coil)

  • 강상원;최광제
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
    • /
    • pp.106-110
    • /
    • 2001
  • In this paper, a broadband sleeve monopole antenna using a loading coil in sleeve is proposed. The antenna of the proposed structure has the same of the single sleeve monopole antenna, except for using the coil instead of the inner conductor in sleeve. As a result, it is found that the bandwidth is 1.239~2.154 GHz(above 53.9%) for S$\sub$11/=-10dB(VSWR<2), and the antenna impedance is good for a communication system and feeder which the impedance has 50$\Omega$.

  • PDF

슬롯이 장하된 T자형 평면 모노폴 안테나 (Slot loaded Tee-type planar monopole antenna)

  • 이종익
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.619-622
    • /
    • 2006
  • A printed Tee-type monopole antenna loaded by a pair of L-type slots is studied. The effects of position, width, and length of loaded slots on frequency bandwidth of the antenna are examined. As an examples, a compact dual band monopole antenna is designed for the ISM band $[2.4\sim2.48GHz,\;5.15\sim5.35GHz,\;and\;5.725\sim5.85GHz]$ use and the characteristics of the constructed antenna are studied experimentally.

  • PDF

전방향 복사패턴의 이중대역 프린트형 모노폴안테나 (Printed Monopole Antenna of Dual band for Omni-diractional Radiation Patterns)

  • 이현진;임영석
    • 대한전자공학회논문지TC
    • /
    • 제40권11호
    • /
    • pp.99-104
    • /
    • 2003
  • 인쇄형 모노폴 구조를 이용하여 PCS와 IMT2000대역인 이중 주파수 대역의 프린트형 모노폴 안테나를 설계 및 제작하였으며, 이중대역을 얻기 위하여 기존의 단일 모노폴 구조를 수정한 이중 모노폴 구조를 제안하였다. 제안된 안테나는 기존의 모노폴 안테나와 동일한 무지향 복사 특성을 가지며 평면으로 구현되어 모노폴 안테나 보다 크기가 작고 높은 이득을 갖는다. 두개의 단일 모노폴은 상호 임피던스 매칭을 위한 스터브로 작용하여 임피던스 매칭이 용이하고 이에 따른 대역폭의 증가를 향상시킬 수 있었다. 안테나의 대역폭은 VSWR(equation omitted)1.5를 기준하여 150㎒ (1.74∼1.89〔㎓〕)와 290㎒(1.95∼2.24〔㎓〕)의 결과를 얻었다. 이는 PCS대역(1.75∼l.87〔㎓〕)과 IMT2000대역(1.92∼2.17〔㎓〕)을 충족시킬 수 있다.

로딩 코일을 이용한 광대역 슬리브 모노폴 안테나의 설계 (The Design of the Broadband Sleeve Monopole Antenna using Loading Coil)

  • 최광제
    • 한국전자파학회논문지
    • /
    • 제13권3호
    • /
    • pp.250-256
    • /
    • 2002
  • 본 논문에서는 슬리브 모노폴 안테나 슬리브 내에 로딩 코일을 적용한 광대역 안테나를 제안하였으며, 제안한 안테나의 중심주파수는 1.900MHz 이다. 이 안테나는 단일 슬리브 모노플 안테나의 구조에서 슬리브의 내도체를 인턱터의 역할을 하는 코일을 변형한 것이다. 그 결과 S$_{11}$=-10㏈(VSWR〈2) 대역폭이 1.239~2.154GHz(53.9% 이상)의 광대역이고 안테나 임피던스 특성도 우수하여 50 Ω계의 통신시스템 및 급전선에 적용할 수 있음을 확인하였다.

십자형 평판 모노폴 안테나의 L자형 슬릿에 의한 다중 공진 특성 연구 (A Study on the Multiple Resonance Characteristics of Crossed Planar Monopole Antenna by L-Shaped Slit)

  • 심재륜
    • 한국정보통신학회논문지
    • /
    • 제13권1호
    • /
    • pp.1-5
    • /
    • 2009
  • 본 논문에서는 십자형 평판 모노폴 안테나에 L자형 슬릿을 두어 이중공진 및 삼진공진 등 다중 공진 특성이 발생하는 새로운 형태의 안테나 구조를 제안하였다. 십자형 평판 모노폴 안테나 구조에서 다중공진 특성이 발생하도록 하기 위해서는 평판 모노폴 안테나의 높이와 길이를 원하는 공진 주파수에 맞추고, 안테나 표면에 L자형 슬릿을 두어 슬릿의 길이와 슬릿의 개수에 따라 공진 주파수를 여러 개 발생시킨다. 본 논문에서 제안하는 안테나의 장점은 L자형 슬릿의 길이와 개수에 의해 쉽게 특정 주파수 대역에서 다중공진이 발생하도록 설계 가능하다는 것이다. 또한, 공진이 발생하는 주파수에서 모두 무지향성의 방사패턴과 함께 일정 수준 이상의 고이득을 가져 차량용 등 이동체용 안테나에 적합하다.

광대역 기판 인쇄형 톱날구조를 갖는 모노폴 안테나 설계 (The Design of Wideband Printed Saw Tooth Monopole Antenna)

  • 김남기;고진현;하재권;이승엽
    • 한국전자파학회논문지
    • /
    • 제15권10호
    • /
    • pp.915-921
    • /
    • 2004
  • 본 논문에서는 안테나 방사부를 톱날의 모노폴 구조를 가지면서 이면(裏面)의 접지 면적을 변화시키는 임피던스 정합 방법을 적용하여 광대역 특성을 갖는 안테나를 제안한다. 제안된 안테나의 길이는 1/4 파장보다 작고, 대역폭은 2:1 VSWR의 범위에서 $89.6\%$, 0.8 GHz$\~$2.0 GHz에서의 안테나 이득은 -0.02 dBi$\~$2.54 dBi를 얻었으며 방사패턴은 모노폴 안테나와 유사한 패턴을 얻을 수 있었다.