• Electrical & Electronic Materials
• /
• v.6 no.1
• /
• pp.50-54
• /
• 1993

각종 monomer를 공중합시킨 PE의 고전계 전기전도와 X선 유기 TSC(X-ray induced thermally stimulated current)를 측정하고 공중합 monomer의 영향에 대하여 검토하였다. 할로겐을 함유한 공중합 PE에서 고전계 전기전도가 억제되는 것을 관찰하였다. 또 할로겐을 함유하는 monomer를 공중합시킨 PE의 X선 유기 TSC에서는 공중합에 의한 전자 trap은 약 0.4eV정도로 평가된다. 이들 시료에서 절연 파괴 강도가 상승한 것은 전자 트랩이 전자의 전계가속을 억제하여 고전계 전기전도를 억제시키고 절연파괴강도를 향상 시킨 것으로 추측된다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.425-429
• /
• 2004

[DEACOOH]-Montmorillonite intercalations complex obtained from Na-Montmorillonite and 10-Carboxy-n-decyldimethylethylammonium bromide (organic cation) was reacted with the monomer ($\varepsilon$-caprolactone) to achieve the [DEACOOH]-$\varepsilon$-caprolactone-Montmorillonite intercalations complex. From this intercalations complex Montmorillonite/Polycaprolactone nanocomposites in which montmorillonite (inorganic polymer) is chemically linked with the polycaprolactone (organic polymer) were formed at 240$^{\circ}C$ by three different methods such as in stoichiometric amounts between monomer and organic cation, in excess of only the monomer and in excess of both organic cation and monomer. The products obtained after polymerization were analyzed with X-ray diffractometer and TEM.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.123-128
• /
• 2001

The Purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars using methyl methacrylate-butyl acrylate latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. This paper deals with the effect of the monomer ratio on the typical properties of polymer-modified mortars with methyl methacrylate-butyl acrylate latexes. The polymer latex-modified mortars are prepared with 5, 10, IS and 20% of polymer cement ratio respectively, and properties of modified mortars such as water absorption, compressive and flexural strengths, chloride-ion penetration depth are tested. The test results indicate that the monomer ratio is very important factors to characterize the strength properties of polymer-modified mortars, but the water absorption and chloride-ion penetration depth are influenced by polymer-cement ratio rather than monomer ratios.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.651-657
• /
• 2009

This study examined the optimum compositions of binder, photo-acid generator (PAG) and sensitizer for the cationic ring opening polymerization of 1,3-bis[2-(3-{7-oxabicyclo-[4.1.0]heptyl})]-tetramethyldisiloxane in the presence of polydimethylsiloxane with four epoxide moieties as a co-monomer. When diffractive efficiency (DE) values were compared quantitatively to analyze the effect of the binder on holographic photopolymerization, DE was affected by the viscosity of the binders and miscibility with the monomer mixture. Extremely low DE values were observed when the immiscible dimethyl silicone was used as a binder. Therefore, methylphenyl silicone, which is miscible with the monomer mixture, was used as the binder for further studies. The optimal conditions were a binder viscosity between 250 to 390 cP, and contents of the binder, PAG, and sensitizer were 75-125 wt%, > 6 wt% and 0.05 wt% to the total monomer mixture, respectively.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.154-160
• /
• 2016

The four different vinyl monomers in the reaction of isocyanate-terminated polyurethane prepolymer were used for the preparation of macromonomers and successfully employed in the dispersion polymerization of styrene. The chemical structures of vinyl monomer in macromonomers influenced on the polystyrene particle characteristics, such as the conversion, weight average molecular weights ($M_w$), polydispersity index (PDI), weight average diameter ($D_w$), and uniformity. The conversion of polystyrene increased with amounts of methyl group in vinyl monomer. Also the uniformity of polystyrene particles increased with amounts of methyl group in vinyl monomer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.397-398
• /
• 2008

We have studied the electrically controlled birefringence (ECB) mode using reactive mesogen (RM) monomer to control pretilt angle and improve electrical characteristics. The measure of capacitance confirmed new pretilt angle by RM monomer, and Voltage Holding Ratio (VHR) was increased more than normal ECB cell.

• Journal of Photoscience
• /
• v.12 no.1
• /
• pp.41-46
• /
• 2005

We synthesized chiral choleseric liquid crystalline monomer p-phenylene bis-(p-3-acryloxy-2(S)-methylpropoxy)benzoate (1) and achiral nematic liquid crystalline monomer, p-phenylene p-acryloxy-6-hexyloxy-p-octyloxybenzoate (2) for the construction of cholesteric polymer network with a pitch gradient. In this research we attempted to synthesize cholesteric polymer film which have a wide reflection bandwidth in the region of visible wavelength with the synthesized chiral cholesteric monomer 1 and nematic monomer 2 under various photopoly merization conditions. We succeeded to construct cholesteric polymer film network with a pitch gradient covering more than 200 nm bandwidth in the visible wavelength by diffusion controlled photostructuring method.

• Mass Spectrometry Letters
• /
• v.9 no.1
• /
• pp.17-23
• /
• 2018

Studies on the interactions of amyloidogenic proteins with trace metals, such as copper, have indicated that the metal ions perform a critical function in the early oligomerization process. Herein, we investigate the effects of Cu(II) ions on the active sequence regions of amyloidogenic proteins using electrospray ionization mass spectrometry (ESI-MS) and collision induced dissociation tandem MS (CID-MS/MS). We chose three amyloidogenic peptides NNQQNY, LYQLEN, and VQIVYK from yeast prion like protein Sup35, insulin chain A, and tau protein, respectively. [Cu-peptide] complexes for all three peptides were observed in the mass spectra. The mass spectra also show that increasing Cu(II) concentrations decrease the population of existing peptide oligomers. The tandem mass spectrum of NNQQNY shows preferential binding for the N-terminal region. All three peptides are likely to appear to be in a Cu-monomer-monomer (Cu-M-M) structure instead of a monomer-Cu-monomer (M-Cu-M) structure.

• Membrane Journal
• /
• v.14 no.3
• /
• pp.207-217
• /
• 2004

In this study, we prepared nanofiltration membrane by applying the interfacial polymerization method as a way of manufacturing composite membranes. We have examined the effects of various preparation factors such as monomer concentration and composition, thermal curing condition, post treatment condition. In addition to preparation conditions, we also monitored the effects of operation conditions such as feed solution concentration and operation pressure on the permeation properties of the resulting nanofiltration membrane. We intended to increase the permeation rate of nanofiltration membrane by the enlargement of effective surface area using additives during interfacial polymerization step. With increasing the monomer concentration, membrane permeation rate are decreased with maintaining almost constant rejection. With respect to curing condition, with increasing the curing temperature both permeation rate and rejection are decreased. With increasing the ratio of MPD in amino monomer composition, permeation rate decreased drastically with high rejection. With increasing the feed solution concentration, both permeation rate and rejection decreased. Both permeation rates and rejection increased with increasing the operating pressure. Nanofiltration membrane have higher surface roughness with increasing additive concentration in the case of using MPD contained amine composition than using piperazine alone. Permeation rates are much lower than the nanofiltration membrane prepared by piperazine.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.332-337
• /
• 2006

Monodisperse polymer particles were prepared via one-step seeded polymerization using PMMA seed particles and HDDA (or EGDMA) as crosslinking monomer. For the study, the effects of 1) the ratio of the absorbed monomer or monomer mixture to the seed polymer particles (swelling ratio), 2) the ratio of EGDMA in absorbed monomer mixture, 3) the dosage of initiator, and 4) electro less Ni plating on the variation of mechanical properties of monodisperse polymer particles, such as recovery rate, K-values, breaking strength and breaking displacement, were investigated by using MCT (micro compression test). It was observed that monomer swelling ratio influenced only breaking strength, but EGDMA ratio in monomer mixture, dosage of initiator and electroless Ni plating affected both K-values and breaking strength.