• Journal of the Korean Institute of Educational Facilities
• /
• v.7 no.3
• /
• pp.15-22
• /
• 2000

The purpose of this study is to grasp a concept for mixed-use tendency of educational facilities, its propellant circumstance in the nation and japan, to analyze a feature of a function, a flow planing of user and the complex form which appear from an instance of the mixed-use tendentious educational facilities and is to suggest a basic matter on the architectural planning for mixed-use tendency of the regional facilities and educational facilities. The results of the study can be summarized were as follow: 1) The step of mixed-use in nation is yet the early step and a extremely feeble to compared with the japan. 2) In a case of the mixed-use tendency facility, the nation is to appear for the necessity of a region but they know of a varied facility to be mixed-use tendency in japan. 3) Much to appear monolithic form in the side of complex form. 4) To appear multi-story in the side of facility-story. 5) It is much example of separating from main entrance, the flow of interior found of dividing into not to transit or transit by the function of facility. 6) To know for being tendency of common and division by the principal of user in facility instituting E V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.613-617
• /
• 2002

The ceramic filters were developed using technology similar to that of quartz crystal and electromechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emhpasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creat coupled symmetric and antisymmetric vibration modes. Accordingly, the simulation for ceramic filter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• Korean Journal of Materials Research
• /
• v.24 no.4
• /
• pp.180-185
• /
• 2014

The current concern about these materials ($MoSi_2$ and $NbSi_2$) focuses on their low fracture toughness below the ductile-brittle transition temperature. To improve the mechanical properties of these materials, the fabrication of nanostructured and composite materials has been found to be effective. Nanomaterials frequently possess high strength, high hardness, excellent ductility and toughness, and more attention is being paid to their potential application. In this study, nanopowders of Mo, Nb, and Si were fabricated by high-energy ball milling. A dense nanostructured $MoSi_2-NbSi_2$ composite was simultaneously synthesized and sintered within two minutes by high-frequency induction heating method using mechanically activated powders of Mo, Nb, and Si. The high-density $MoSi_2-NbSi_2$ composite was produced under simultaneous application of 80MPa pressure and an induced current. The sintering behavior, mechanical properties, and microstructure of the composite were investigated. The average hardness and fracture toughness values obtained were $1180kg/mm^2$ and $3MPa{\cdot}m^{1/2}$, respectively. These fracture toughness and hardness values of the nanostructured $MoSi_2-NbSi_2$ composite are higher than those of monolithic $MoSi_2$ or $NbSi_2$.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.133-139
• /
• 2005

A monolithic microwave integrated circuit (MMIC) chip set consisting of a power amplifier, a driver amplifier, and a frequency doubler has been developed for automotive radar systems at 77 GHz. The chip set was fabricated using a 0.15 ${\mu}$ gate-length InGaAs/InAlAs/GaAs metamorphic high electron mobility transistor (mHEMT) process based on a 4-inch substrate. The power amplifier demonstrated a measured small signal gain of over 20 dB from 76 to 77 GHz with 15.5 dBm output power. The chip size is 2mm${\times}$ 2mm. The driver amplifier exhibited a gain of 23 dB over a 76 to 77 GHz band with an output power of 13 dBm. The chip size is 2.1mm${\times}$ 2mm. The frequency doubler achieved an output power of -6 dBm at 76.5 GHz with a conversion gain of -16 dB for an input power of 10 dBm and a 38.25 GHz input frequency. The chip size is 1.2mm ${\times}$ 1.2mm. This MMIC chip set is suitable for the 77 GHz automotive radar systems and related applications in a W-band.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1282-1285
• /
• 1988

A novel temperature difference-to-frequency converter using two resistance temperature detectors (RTD) has been developed. The resistance difference of two RTD is converted into its equivalent inductance to form the resonant circuit of the Colpitts oscillator. The conversion sensitivity of 16 Hz/$^{\circ}C$ and the residual nonlinearity less than 2.15% over the temperature difference range from 35$^{\circ}C$ to 155$^{\circ}C$ are obtained by the prototype converter. The frequency drift of oscillator itself is $\pm$ 0.5Hz. Thus, the minimum detectable temperature difference is estimated to be $\pm$ 0.013$^{\circ}C$. The proposed coverter, except for two RTD, can be fabricated in monolithic IC form.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1666-1671
• /
• 1989

A novel switched-capacitor circuit for interfacing capacitive microtransducers with a digital system is developed based on the dual-slope integration. It consists of a differential integrator and a comparator. Driven by the teo phase clock, the circuit first senses the capacitance difference between the transducer and the reference capacitor in the form of charge, and accumulates it into the feedback capabitor of the integrator for a fixed period of time. The resulant accumulated charge is next extracted by the known reference charge until the integrator output voltage refurns to zero. The length of time required for the integrator output to return to zero, as measured by the number of clock cycle gated into a counter is proportional to the capacitance difference, averaged over the integration period. The whole operation is insensitive to the reference voltage and the capacitor values involved in the circuit, Thus the proposed circuit permits an accurate differental capacitance measurement. An error analysis has showh that the resolution as high as 8 bits can be expected by realizing the circuit in a monolithic MOS IC form. Besides the accuracy, it features the small device count integrable onto a small chip area. The circuit is thus particularly suitadble for the on-chip interface.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.101-107
• /
• 2002

High performance packages must protect circuits from the internal leakaged-electromagnetic fields as well as the surrounding. In this paper, we characterized an electromagnetically-shielded millimeter-wave ceramic package from 20 to 40 ㎓ using FEM(Finite Element Method). From these calculation results, the parasitic resonance is observed at 33.4 ㎓. We use metal-filled via-holes at the ceramic package walls and resonance has been suppressed in a frequency range from 20 to 40 ㎓. These calculation results will be helpful for MMIC packaging using electromagnetically-shielded millimeter-wave ceramic packages.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.43-47
• /
• 2004

A coupler or divider is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems monolithic integration of passive components is highly desirable. In this study by the LTCC(Low temperature co-fired ceramics) technology a 2012 size type dual band coupler with multi-layer structure was fabricated. To achieve the desired coupling values for both DCS and EGSM bands, broad side coupled patterns were used with multi-layer structure. Its characteristics such as coupling, insertion loss, isolation and directivity values were measured and compared with simulation results.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.89-89
• /
• 2014

While the current consensus view holds that galaxy mergers are commonplace, it is sometimes speculated that Globular Clusters (GCs) may also have undergone merging events, possibly resulting in massive objects with a strong metallicity spread such as Omega Centauri. Galaxies are mostly far, unresolved systems whose mergers are most likely wet, resulting in observational as well as modeling difficulties, but GCs are resolved into stars that can be used as discrete dynamical tracers, and their mergers might have been dry, therefore easily simulated with an N-body code. It is however difficult to determine the observational parameters best suited to reveal a history of merging based on the positions and kinematics of GC stars, if evidence of merging is at all observable. To overcome this difficulty, we investigate the applicability of supervised and unsupervised machine learning to the automatic reconstruction of the dynamical history of a stellar system. In particular we test whether statistical clustering methods can classify simulated systems into monolithic versus merger products. We run direct N-body simulations of two identical King-model clusters undergoing a head-on collision resulting in a merged system, and other simulations of isolated King models with the same total number of particles as the merged system. After several relaxation times elapse, we extract a sample of snapshots of the sky-projected positions of particles from each simulation at different dynamical times, and we run a variety of clustering and classification algorithms to classify the snapshots into two subsets in a relevant feature space.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.895-898
• /
• 2008

This research paper intends to investigate and review the new technology of patent registration trend for the most recent domestic retaining wall and bridge abutment, and to apply the technology appropriately to the actual retaining wall and bridge abutment construction. Investigated new technological patents for retaining wall include pre-fabricated PC retaining wall construction method that reduces section force with prestressed PS steel bars, pre-fabricated Coupler-Tension retaining wall, clay reinforced retaining wall block for road, earth reinforced retaining wall block that induces uniform settlement, and etc. Investigated new technologies for abutment are abutment construction method that uses sheet pile, monolithic bridge with complex abutments, construction method for abutment bridge, earth reinforced abutment structure and etc.