• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.24-27
• /
• 2024

A monotype valve body for a dual clutch transmission has the potential to reduce costs, weight, and manufacturing time by modularizing various parts, including those of existing solenoid packs and valve bodies, into one through the application of super-precision die casting technology. However, this approach may lead to challenges such as reduced rigidity and increased interference due to modularization and compactness, impacting both product performance due to the reduced weight as well as durability and reliability. Unlike existing products, this approach requires a high-precision thin-wall block to avoid more complicated flow line formation, interference between flow lines, and leaks, as well as a strict quality requirement standard and precise inspections including detection of internal defects. To conduct precise inspections, we built an equivalent model corresponding to a driving distance of 300,000 km. Testing involved simulating actual road loads using a real vehicle and a chassis dynamometer in the FTP-75 mode (EPA Federal Test Procedure). The aim of the study was to establish a vehicle load-based part durability model for manufacturing a mono-type valve body and to develop fundamental technology for part weight reduction through preliminary design by introducing analytical weight reduction technology based on the derived results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2397-2402
• /
• 2010

Dielectric resonator bandpass filters with various time-delay at 800MHz were designed and fabricated in this paper. from the results of this study. first of all, good response. characteristics were measured for all cases. The insertion loss was below 2dB and flatness for ripple was below 0.2dB, whereas return loss was over 20dB, respectively. The measured delay time of the fabricated prototype were 6ns, 12ns and 200s, respectively and the flatness characteristics did not exceeding Ins for all cases. Furthermore, 2~4ns of flatness were measured for 2-hole dielectric block and other dielectric resonator filters with various delay time by combination of each prototypes filters were also implemented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.629-633
• /
• 2011

The Wolmi Eunha-Rail in Incheon is connecting Wolmido and Incheon Station with an elevated monorail road supported by piers. This railroad system is characterized by driverless automatic operation and moving-block based control. The main technology applied to this signal-controlled system is CBTC (Communications-Based Train Control) which based on wireless communications. The CBTC system is simple in that composition so that can minimize field facilities and lowers costs of construction and maintenance. This CBTC system is emerging as a major signal-controlled system in the future metro market.

• Korean Institute of Interior Design Journal
• /
• v.17 no.1
• /
• pp.162-169
• /
• 2008

Philippe Starck is a famous french designer known for his creative works in all aspects of life from architectural space to product design. Especially, in regard to furniture, he designed more than 250 works with various design characteristics. This study therefore aims to examinate the characteristics of furniture designed by Philippe Starck through assessment of his design background and philosophy, evaluation of fifty or so of his works in terms of their function, form, material, and emotions, and lastly through a chronological analysis. As a result from this study, following various results are drawn as design characteristic through forty six representative cases: 1) possibility of fabrication and transformation 2) multi-function or optional function for user 3) pursuit of simplicity using the characteristic of singular material or mono block and immateriality 4) emotional approach in design 5) non-design method such as use of archetype or historical form.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.580-582
• /
• 2008

The object of this paper is develope the PC based controlled high voltage power supply and studies 1.2kW(120kV, 10mA) pulse power X-ray generator possible to adapt fluoroscopy of Dental CT X-ray generator and industrial X-ray pulse power equipment. The developed pulse power X-ray generator consisted of mono-block tank include X-ray tube and high voltage X-ray power supply circuit and high voltage control unit with RS232C/422 communication port. The PC control program of pulse power X-ray generator uses LabVIEW, and the size of high voltage transformer and high voltage generator is minimized by high voltage high frequency inverter has 100kHz switching frequency. Also this paper shows result of X-ray tube voltage and tube current correspond to variable load.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.750-754
• /
• 2003

본 논문에서는 X-선 관전류를 직접 검출하여 제어하는 2.4kW(80kv,30mA)급 최소형, 최경량 휴대용 X-선 발생 장치를 제안한다. 본 장치는 X-선발생을 위한 고전압 발생단에 모노탱크 블록 사용하였고, 고주파 고전압용 인버터에는 스위칭 전력소자로서 MOS-FET를 채용, 70kHz로 스위칭 함으로서 고전압 변압기를 비롯한 고전압 발생부의 크기와 무게를 최소화하였다. 또한, 설정 관전류에 대한 정밀한 제어를 위하여 2단계 모드로 필라멘트 예열을 행하여 관전류 응답특성을 개선하였으며 제안한 휴대용 X-선 발생장치의 부하변동에 따른 X-선 관전압과 관전류의 개선된 특징을 실험파형을 통하여 입증하였다.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.4
• /
• pp.255-261
• /
• 2010

Pluronic as pharmaceutical excipients are listed in the US and British Pharmacopoeia. In particular, Pluronics exist as different compositions and display abundant phases as self-assembling into polymeric micelles with various morphologies depending on the aqueous solvent quality, the composition of structure, and hydrophilic-lipophilic balance (HLB). Pluronics were also known as a P-gp modulator, which was exploited as a reversal molecule of multi-drug resistant (MDR) cancers. We selected a lamella forming Pluronic L92 which has high hydrophobicity and relatively long PEO block among L series of Pluronics. The dispersion of L92 showed great size particles and low stability. To increase the stability and to decrease the particle size, secondary Pluronics (F68, F88, F98, F127, P85, P105, and P123) with relatively long PEO chain were added into 0.1 wt% Pluronic L92 dispersion. The stability of binary systems was increased due to incorporated long PEO chain. Their particle sizes slightly decreased to over 200~400 nm and their solubilization capacity of binary systems didn't change except Pluronic L92/P123 mixtures. The L92/P123 systems showed ca. 100 nm sizes and lowest turbidity among the all systems. The solubilization capacity of 0.1 wt% L92/0.1 wt% P123 was slightly increased compared to 0.1 wt% L92 mono system and other binary systems. These nano-sized binary systems may have potential as alternative drug delivery systems with simple preparation method and overcome the drawbacks of mono systems such as low stability and loading capacity.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.313-320
• /
• 2020

This research was performed to investigate the hypothesis that dietary mono-component protease (PRO) might improve growth performance, nutrient digestibility, and carcass characteristics of growing-finishing pigs. A total of eighty-four pigs [Duroc × (Landrace × Yorkshire), 25.3 ± 2.16 kg initial body weight] were randomly assigned to three dietary treatments (7 replicates/treatment; 2 barrows and 2 gilts/replicate) in a randomized complete block design (block = sex). The dietary treatments were prepared as follows; (1) a positive control (PC) as a typical growing-finishing diet based on corn and soybean meal, (2) PC added with 0.015% of PRO (PCPRO), and (3) a negative control (NC) added with 0.015% of PRO (NCPRO). The NC had a lower concentration of crude protein (CP) compared with PC. The PRO was a commercial product that contained 75,000 protease units/g and derived from Nocardiopsis prasina produced in Bacillus licheniformis. Dietary treatments were offered to pigs during growing and finishing periods. Measurements were growth performance, apparent total tract digestibility (ATTD) of nutrients, and carcass characteristics. The PCPRO and/or NCPRO increased average daily gain (ADG) and gain to feed ratio (G:F) during growing (p < 0.10), finishing (p < 0.05), and growing-finishing periods (p < 0.10) compared with PC. Furthermore, pigs fed PCPRO and NCPRO had higher (p < 0.05) ATTD of CP and energy during growing and/or finishing periods than those fed PC. In conclusion, the supplementation of PRO in diets improved growth performance and protein digestibility of growing-finishing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.10
• /
• pp.1500-1507
• /
• 2016

Myostatin (MSTN) can negatively regulate the growth and development of skeletal muscle, and natural mutations can cause "double-muscling" trait in animals. In order to block the inhibiting effect of MSTN on muscle growth, we transferred zinc-finger nucleases (ZFN) which targeted sheep MSTN gene into cultured fibroblasts. Gene targeted colonies were isolated from transfected fibroblasts by serial dilution culture and screened by sequencing. Two colonies were identified with mono-allele mutation and one colony with bi-allelic deletion. Further, we introduced the MSTN-ZFN mRNA into sheep embryos by microinjection. Thirteen of thirty-seven parthenogenetic embryos were targeted by ZFN, with the efficiency of 35%. Our work established the technical foundation for generation of MSTN gene editing sheep by somatic cloning and microinjection ZFN into embryos.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1021-1024
• /
• 2009

We successfully prepared high-flow polycarbonate (PC) by blending commercial PC with a low molecular weight PC oligomer. The oligomer was synthesized by the addition of a large quantity of mono functional phenol groups, and the chain end group was reacted with p-tertiary butyl phenol (PTBP) to block the reactivity. The viscosity average molecular weight ($M_v$) for the oligomer was about 4,000-5,000 g/mol, compared to ~19,000 g/mol for the PC blend obtained by blending 10 wt% of the prepared oligomer with the commercial grade PC ($M_v$ of 21,000 g/mol). The blended PC had a melt flow index of 45, which is 2.5 times higher, and a processing temperature that was $20^{\circ}C$ lower, than that of commercial grade PC having a similar $M_v$.