• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.34-42
• /
• 2009

Gas turbine performance diagnostics is a method for detecting, isolating and quantifying faults in gas turbine gas path components. On-line precise fault diagnosis can promote greatly reliability and availability of gas turbine in real time operation. This work proposes a GUI-type on-line diagnostic program using SIMULINK and Fuzzy-Neuro algorithms for a helicopter turboshaft engine. During development of the diagnostic program, a look-up table type base performance module are used for reducing computer calculating time and a signal generation module for simulating real time performance data. This program is composed of the on-line condition monitoring program to monitor on-line measuring performance condition, the fuzzy inference system to isolate the faults from measuring data and the neural network to quantify the isolated faults. Evaluation of the proposed on-line diagnostic program is performed through application to the helicopter engine health monitoring.

• IE interfaces
• /
• v.19 no.1
• /
• pp.19-25
• /
• 2006

In the development process, the objective of a reliability growth program is to track the increase in system reliability, and determine as early as possible whether or not the system reliability is growing at a sufficient rate to meet the required goal and allocate available resources accordingly. Implementation of this kind of program will provide very useful information on concept selection, product/process reliability, and cost effectiveness without too much time, money and engineering effort being spent on the development of failure suspect parts. The purpose of this research is to present a practical method for efficiently monitoring a reliability growth test process using AMSAA(Army Materiel Systems Analysis Activity) reliability growth model. The presented growth management is a viable method for identifying failure modes, incorporating design changes and monitoring reliability progress on an on-going basis during the early stages of a product development program.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.33-35
• /
• 2004

In this paper, web based monitoring systems are implemented for multi-axis force control systems of an intelligent robot. Linux operating systems are ported to an embedded system which Include a Xscale processor to implement a web based monitoring system. A device driver is developed to receive data from multi-axis force sensors of intelligent robots. To control this device driver, a socket program for Labview is also developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.151-152
• /
• 2008

• Structural Monitoring and Maintenance
• /
• v.3 no.1
• /
• pp.51-69
• /
• 2016

Monitoring the performance and estimating the remaining useful life of aging civil infrastructure in the United States has been identified as a major objective in the civil engineering community. Structural health monitoring has emerged as a central tool to fulfill this objective. This paper presents a review of the major structural monitoring programs that have been recently implemented in the United States, focusing on the integrity and performance assessment of large-scale structural systems. Applications where response data from a monitoring program have been used to detect and correct structural deficiencies are highlighted. These applications include (but are not limited to): i) Post-earthquake damage assessment of buildings and bridges; ii) Monitoring of cables vibration in cable-stayed bridges; iii) Evaluation of the effectiveness of technologies for retrofit and seismic protection, such as base isolation systems; and iv) Structural damage assessment of bridges after impact loads resulting from ship collisions. These and many other applications show that a structural health monitoring program is a powerful tool for structural damage and condition assessment, that can be used as part of a comprehensive decision-making process about possible actions that can be undertaken in a large-scale civil infrastructure system after potentially damaging events.

• Hwankyungkyoyuk
• /
• v.19 no.1 s.29
• /
• pp.104-115
• /
• 2006

This study was conducted to investigate whether attitudes and recognitions of middle and high school students regarding environmental concerns were improved after anuran call monitoring. It was a step toward monitoring local environmental changes with anuran calls. Three-striped pond frogs (Rana nigromaculata), Bullfrogs (R. catesbeiana), and Narrow-mouthed toads (Kaloula borealis) were surveyed to determine local abundance and distribution of them in 12 study sites using their advertising calls. A published booklet, which contains morphological, physiological, ecological, and acoustic information on amphibian species and methods of monitoring anuran calls were provided to monitoring students for identifying the three species. Pretest-posttest were conducted before and after monitoring from 10 April to 28 August in 2005 to determine how the monitoring students changed their attitudes on environmental issues, increased knowledges on amphibians, and improved the understanding on the cause and effect of declining amphibian populations. The amphibian monitoring program was effective to improve the students' attitudes towards conserving environments as well as the students' knowledge on general behavior and ecology of various amphibian species although their understanding about various environmental problems was not. In addition, the program increased the students' understanding on the problems of declining amphibian populations.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.47-53
• /
• 2009

This study performed the construction of test bed for the combination of the health monitoring system In Yongjong grand bridge with the safety management network system in order to explore the feasibility of combining the existing monitoring system with the safety management network system. For this purpose, connection program which consists of DAQ sender server program and DAQ receiver server program has been developed. DAQ sender server program installed in the connection server, which is located on the DMZ zone of the existing monitoring system, plays the role of communicating with the monitoring system. On the other hand, DAQ receiver server program installed in the connection server, which is located on the integrated operation center of the safety management network system, plays the part of gathering real time and tim history data of the existing monitoring system and storing them in the integrated operation server through the communication with the DAQ sender. Test bed demonstrated the feasibility of combining the existing monitoring system with the safety management network system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.607-610
• /
• 2007

In this paper, proposes the monitoring system it will be able to trace the executed of each threads in OpenMP based a parallel program. The monitoring system of existing in uses each threads label information and the analysis technique which uses the access-history was most. This has the problem which raises the time and space complexity which is caused by with massive information creation. In this paper, only the thread which includes interest information it creates tracking information with the target. And it provides information which is intuitive to the user it provides the visualization system for to a same time. The visualization model is composed the images-information of a base. This does to be it will be able to understandable a program execute situation using an image processing technique. Therefore, this paper provides the parallel program an effective debugging environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.323-330
• /
• 2009

The demand that we are monitoring security and crime of the urban facilities is increasing recently, but the using CCTV devices are expensive. In this research, we enlarge the angle of view using the Fish-eye Lens and the Photogrammetry, the efficiency of monitoring enhance. First, we carry out the calibration of the Fish-eye Lens indoors, we calculate the correction parameters, and then covert the original image-point to new image-point correcting distortion. Second, the correction program with the correction parameters can obtain the real-time correcting image. Lastly, for authorization the developed program we compare correcting-image with scanning-imge, it is showed the RMSE is 3.2pixel.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.2
• /
• pp.1-16
• /
• 2004

The ultimate goal of health promotion programs is to improve the quality of life through promoting community health. Since the performance of health promotion programs are greatly affected by the quality of the planning and implementation process of the programs, the proper quality assessment of the program process is very important. According to existing literature, the tool for assessing the quality of the process and implementation as well as the outcome. However, no assessment tool for the quality of the process of health promotion programs has been developed in Korea. The purpose of the study is to develop a quality assessment tool for the process of health promotion programs being conducted at public health centers in Korea. The quality assessment tool developed in the study consists of the following four domains： strategic planning (14 items), program management (11 items), monitoring and evaluation (13 items), and resources and information (15 items). The strategic planning deals with the function of the planning staff and committees, community data analysis, the feasibility of the program, and the approach methods for attaining the goal of the program. The program management includes items on the qualification and power of the program staff. Monitoring and evaluation deals with the planning and education for monitoring, reporting and communication among program units, and feedback after monitoring. Finally, the resource and information covers the planning and activities for obtaining resources and information, community networking, beneficiaries' response, and consulting activity of the staff.