• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.588-597
• /
• 2009

Measurements of atmospheric $CO_2$ were made in the mountainous region of Srinagar-Garhwal, India (January to December 2006). Concentrations of $CO_2$ averaged $393\pm4.9$ ppm in 2006. Daily variations of $CO_2$ values showed minimum during the daytime (376.2 ppm) and peaked in the morning/evening (410.1 ppm). At monthly intervals, the $CO_2$ values varied from $367\pm11.14$ (May) to $425.2\pm13.54$ ppm (March). If divided on a seasonal basis, the values declined to minimum amounts in post-monsoon ($389.9\pm9.0$ ppm) and reached maximums during winter ($397.1\pm11.6$ ppm). Although phenology is significant in controlling $CO_2$ levels, short-term changes cannot be explained without the anthropogenic perturbations (e.g., vehicular pollution and forest fires). The $CO_2$ concentrations in Srinagar-Garhwal (393.4 ppm) were generally higher than those of other major monitoring locations around the world.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.989-994
• /
• 2011

This study aims to demonstrate the feasibility of a visual servoing-based paired structured light (SL) robot for estimating structural displacement under various external loads. The former paired SL robot, which was proposed in the previous study, was composed of two screens facing with each other, each with one or two lasers and a camera. It was found that the paired SL robot could estimate the translational and rotational displacement each in 3-DOF with high accuracy and low cost. However, the measurable range is fairly limited due to the limited screen size. In this paper, therefore, a visual servoing-based 2-DOF manipulator which controls the pose of lasers is introduced. By controlling the positions of the projected laser points to be on the screen, the proposed robot can estimate the displacement regardless of the screen size. We performed various simulations and experimental tests to verify the performance of the newly proposed robot. The results show that the proposed system overcomes the range limitation of the former system and it can be utilized to accurately estimate the structural displacement.

• Journal of Information Technology and Architecture
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2012

To promote process effectiveness and efficiency, it is necessary that port logistics employ automated equipments for handling containers. There exists a system for automatically managing the container flow, called Control Module. However, it has limitation to assign the execution order to the machine and monitor the container flow in real time process. Business process management (BPM) provides a suitable and effective framework to address this problem including controlling and monitoring the flow of each container. Since the nature of container handling process is different with the common process in BPM that is conducted by human performer, it is necessary to adjust the BPM framework in the domain of port logistic management. This study presents a BPM framework corresponds with both human-based and machine-based activity to enhance the efficiency of port process flow including container flow. This framework is introduced as an integrated approach and mechanism of BPM application into the container handling system for the purpose of port logistics process automation.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.117-139
• /
• 2016

Previous studies for soil movements induced by tunneling have primarily focused on the free soil displacements. However, the stiffness of existing structures is expected to alter tunneling-induced ground movements, the sheltering influences for underground structures should be included. Furthermore, minimal attention has been given to the settings for the shield machine's operation parameters during the process of tunnels crossing above and below existing tunnels. Based on the Shanghai railway project, the soil movements induced by an earth pressure balance (EPB) shield considering the sheltering effects of existing tunnels are presented by the simplified theoretical method, the three-dimensional finite element (3D FE) simulation method, and the in-situ monitoring method. The deformation prediction of existing tunnels during complex traversing process is also presented. In addition, the deformation controlling safety measurements are carried out simultaneously to obtain the settings for the shield propulsion parameters, including earth pressure for cutting open, synchronized grouting, propulsion speed, and cutter head torque. It appears that the sheltering effects of underground structures have a great influence on ground movements caused by tunneling. The error obtained by the previous simplified methods based on the free soil displacements cannot be dismissed when encountering many existing structures.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.959-964
• /
• 2018

In this study, a study is conducted on a monitoring system that can control the environment of plants using sensors in conjunction with the LED light system and the plant growth control system. To verify the performance of the developed plant growth system, an experiment was conducted on the characteristics of energy efficiency, data transmission rate, and light volume control. The experiment resulted in a satisfactory result by controlling more than 80% energy efficiency, 1Mb/sec wireless communication speed, and 5 levels of optical control. The proposed system can be applied to LED plant facilities and will contribute to the automation of agriculture by organizing an automated system for production efficiency and labor cost reduction for future commercialization.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.9
• /
• pp.27-34
• /
• 2018

The purpose of this study is to demonstrate and analyze the function of a Smart Plug before and after it is applied on the electrical appliances by controlling standby power usage. The research measures and analyzes the amount of electrical energy used while activating the Smart Plug with two types of appliances in a university facilities. The smart plugs were applied into a Group 1 appliances (Multi-function device, computer, laptop, Air con) which completely hinder the standby power, and a Group 2 appliances (Refrigerator, cold and hot water dispenser) which does not completely hinder the standby powers due to the characteristics of the function. First, the total standby power saving of all electrical appliances (Group 1 and Group 2) using the Smart plug was measured as 4.59%. Second, the energy saving of the Group 1 products was analyzed as 26.43%. Third, the standby power saving of the air conditioners from mid October to early December was measured as 31.06%, during the seasons when air conditioning was not actively in use. The research indicates that all specified appliances did have better energy efficiency with the Smart plug regardless of the amount of energy usage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.547-554
• /
• 2005

Virtual Laboratory is the new concept in the field of Control & Measurement as network technology development, it is used in many university and institute nowadays. It is possible to control and measure the instrument in anywhere, anytime by the use of Virtual Laboratory and we can raise the efficiency of experiment. In this paper, we review the concept and necessity of Virtual Laboratory at first and discuss about how we can implement Virtual Laboratory. Then we design framework of Client-Server based Virtual Laboratory fur operating of remote instrument through network, and finally we suggest system model of Virtual Laboratory capable of controlling & monitoring of instrument.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.85-94
• /
• 2005

In this paper, we propose a reliable high-speed UDP-based media transport with an adaptive error control. The proposed adaptive transport scheme controls the amount of redundancy by monitoring the network in order to adapt to network fluctuations efficiently. The feedback of receiver enables the sender to be aware of current reception status (i.e., rate and type of packet loss) and to estimate the expected network status. Based on this, the proposed transport attempts to enable reliable transport by adaptively controlling the amount of both whole sending rate and the ratio for adaptive FEC code. Experiment with high-speed network has been conducted to verify the performance of the proposed system that demonstrates the enhanced reliability of the proposed transport at the speed of up to several hundred Mbps.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.19-24
• /
• 2017

Nowadays, based on the advancement of IT techniques, innovative products combining IT techniques to PA system are developing. In this paper, we presented the hybrid mixer controller for digital PA system. We develop the integrated mixer controller which includes the digital mixer composing an existing digital PA system and function of digital integrated controller. Developed integrated mixer controller consists of multichannel mixer function with 16 audio input channels, 8 output channels. And, it has an equalizer for processing digital audio signal, matrix and limiter. Also, the developed controller has some features such as internet connection for controlling of overall PA system and remote monitoring of mixer process condition.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.275-288
• /
• 2010

In order to improve the quality of electricity in large scale power systems, stability of power system has to be achieved. This can be done by the means of preventative diagnosis of power equipments and protection, monitoring and control of the power system. Since the recent adoption of digital controllers, an improvement in stability was observed; in particular, IED, which contained self-diagnostic abilities such as fault tolerance, allowed for automatic recovery via redundancy or switching-over functions should there be faults with the equipments. Furthermore, communication lines have been hugely simplified, thus adding to the improvement in stability significantly. Taking these error reports and forecasting emergency reports and by effectively responding to them in the overiding controlling systems, high levels of system stability can be obtained. Power Management System that is being applied to automated power sub-stations, takes the IEC61850 international standard as its specification. In this paper, additional research into achieving stability of already developed PMS system and also the stability of the overall system was carried out, and the results of development of communication servers, which play a pivotal role in connecting systems, are stated.