• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.20-26
• /
• 2011

In this paper, we propose an efficient algorithm for reducing the complexity of LDPC code decoding by using node monitoring (NM) and Piecewise Linear Function Approximation (NP). This NM algorithm is based on a new node-threshold method, and the message passing algorithm. Piecewise linear function approximation is used to reduce the complexity for more. This algorithm was simulated in order to verify its efficiency. Simulation results show that the complexity of our NM algorithm is reduced to about 20%, compared with thoes of well-known method.

• Smart Structures and Systems
• /
• v.22 no.1
• /
• pp.57-70
• /
• 2018

For the long-term structural health monitoring of civil structures, the effect of ambient temperature variation has been regarded as one of the critical issues. In this study, a principal component analysis (PCA)-based algorithm is proposed to filter out temperature effects on electromechanical impedance (EMI) monitoring of prestressed tendon anchorages. Firstly, the EMI monitoring via a piezoelectric interface device is described for prestress-loss detection in the tendon anchorage system. Secondly, the PCA-based temperature filtering algorithm tailored to the EMI monitoring of the prestressed tendon anchorage is outlined. The proposed algorithm utilizes the damage-sensitive features obtained from sub-ranges of the EMI data to establish the PCA-based filter model. Finally, the feasibility of the PCA-based algorithm is experimentally evaluated by distinguishing temperature changes from prestress-loss events in a prestressed concrete girder. The accuracy of the prestress-loss detection results is discussed with respect to the EMI features before and after the temperature filtering.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.2
• /
• pp.51-59
• /
• 2024

This study presents a method for health monitoring of rotating objects for mobility based on multiple recursive least squares(RLS) algorithms. The performance degradation of the rotating objects causes low handing / low driving performances and even fatal accidents. Therefore, health monitoring algorithm of rotating objects is one of the important technologies for mobility fail-safe and maintenance areas. In order for health monitoring of rotating objects, four recursive least squares algorithms with forgetting factor were designed in this study. The health monitoring algorithm proposed in this study consists of two steps such as uncertainty estimation and parameter changes estimation. In order to improve estimation accuracy, time delay function was applied to the estimated signals based on the first order differential equation and forgetting factors used for the RLS were reasonably tuned. The health monitoring algorithm was constructed in Matlab/Simulink environment and simulation-based performance evaluation was conducted using DC motor model. The evaluation results showed that the proposed algorithm estimates the actual parameter differences reasonably using velocity and current information.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.579-586
• /
• 2005

Recently, it has demanded to the wireless monitoring system in stand-alone PV power generation system. We propose the multiplex monitoring method using RF unit of low-price. RF unit consists of RF modem and communication controller. It is also able to use by repeater to communicate long distance. In this paper. two algorithms were programmed by CCS-C and C++ for multiplex monitoring method, The algorithm of choosing unit was used 'select and poll method' and the course assignment algorithm was embodied with 'Bellman-Ford algorithm'. The good result was achieved in the actual test without communication-data lose. The proposed method will be applied such as monitoring system of PV light on the wayside, monitoring system of unmanned lighthouse, monitoring system of refrigeration container on vessel and so on. It can be applied in the field that various ocean energy system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.213-219
• /
• 2015

Real-time energy monitoring systems is a demand-response system which is reported to be effective in saving energy up to 12%. Real-time energy monitoring system is commonly composed of smart-plugs which sense how much electrical power is consumed and IHD(In-Home Display device) which displays power consumption patterns. Even though the monitoring system is effective, users should themselves match which smart plus is connected to which appliance. In order to make the matching work to be automatic, the monitoring system need to have appliance identification algorithm, and some works have made under the name of NILM(Non-Intrusive Load Monitoring). This paper proposed an algorithm which utilizes multiple classifiers to improve accuracy of appliance identification. The algorithm proposes to understand each classifiers performance, that is, when a classifier make a result how much the result is reliable, and utilize it in choosing the final result among result candidates from many classifiers. By using the proposed algorithm this paper make 4.5% of improved accuracy with respect to using single best classifier, and 2.9% of improved accuracy with respect to other method using multiple classifiers, so called CDM(Commitee Decision Mechanism) method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.13-19
• /
• 2011

In this paper, the active monitoring and control system is developed. This system can monitor the status of high the speed spindle in real time during its processing, and can analyze its influence of dimensional accuracy and processing if any, and can control the machining condition to realize the machining system equipped with active monitoring and self-diagnostic features. Machining experiment was performed on 3 materials Al, Brass and S45C in order to derive the relation between active monitoring and control algorithm by the machining load. In addition, we measured surface roughness of processing specimen along with the data change of spindle rotating speed and conveying speed according to variation of machining load. Based on these experiments, we derived relations for each material that can be applied to the control algorithm to allow self control of the rotating speed and conveying speed according to the machining load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.987-996
• /
• 2008

In this paper, the conventional anti-collision algorithms, such as Channel Monitoring algorithm and Pulse Protocol algorithm are analyzed. To decrease tag identification time, and increase system throughput and efficiency, we propose a new reader anti-collision algorithm, Pulse Protocol-based Hybrid Reader Anti-collision Algorithm, using Slot-occupied Probability under dense reader environment. The proposed algorithm uses Slot-occupied Probability to improve the performance of Pulse Protocol Algorithm. That is, A reader checks Slot-occupied Probability after generating random backoff time. If Slot-occupied Probability is greater than 0, it uses another new random backoff time to avoid reader collision. We also compare the performance of the proposed algorithm with those of Channel Monitoring and Pulse Protocol algorithms in respect of identification time system throughput, and system efficiency. Simulation results show that the proposed algorithm has an increment of 5% of identification time and system throughput as increasing the number of readers.

• Journal of Integrative Natural Science
• /
• v.10 no.3
• /
• pp.162-170
• /
• 2017

In this paper, it is aim to implement a wheelchair monitoring system that provides users with customized medical services easily in everyday life, together with mobility guarantee, which is the most basic requirement of the elderly and disabled persons with physical disabilities. The case-based intelligent wheelchair monitoring system proposed in this study is based on a case-based k-NN algorithm, which implements a system for constructing and inferring examples of various biometric and environmental information of wheelchair users as a knowledge database and a monitoring interface for wheelchair users. In order to confirm the usefulness of the case-based k-NN algorithm, the SVM algorithm showed an average accuracy of 84.2% and the average accuracy of the proposed case-based k-NN algorithm was 86.2% And showed higher performance in terms of accuracy. The system implemented in this paper has the advantage of measuring biometric information and data communication regardless of time and place and it can provide customized service of wheelchair user through user friendly interface.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.236-237
• /
• 2017

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper implemented a protocol conversion algorithm for industrial monitoring about communication Data. This algorithm is supported programmable method by user. we experimented the protocol conversion by communication gateway module using implemented algorithm, and obtained good results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.283-284
• /
• 2016

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper implemented a protocol conversion algorithm for monitoring of industrial communication Data. This algorithm is supported programmable method by user. we experimented the protocol conversion by communication gateway module using implemented algorithm, and obtained good results.