• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.255-263
• /
• 2001

An Orphan Sources Control program controlled by a web based information system in Korea has been developed to satisfy the national demand on a total management of and integrated radiation safety. There are, currently, three approaches going on to control and manage the orphan sources in Korea. First, Korean regulatory authority has been conducting scrutinizing investigation on and thoroughly monitoring the possession of unlicensed radioactive sources from the late 1990s. Second, the regulatory authority will fully operate an information system on radiation safety to effectively trace and monitor all radioactive sources in the country by the mid 2001. Finally, the regulatory authority strongly advises steel mill companies to closely scrutinize and inspect the scrap metals when they attempt to reutilize metals to prevent from being contaminated by uncontrolled sources through the scrap monitoring systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2008

A fuzzy inference logic system is proposed for gas turbine engine fault isolation. The gas path measurements used for fault isolation are exhaust gas temperature, low and high rotor speed, and fuel flow. The fuzzy inference logic uses rules developed from a model of performance influence coefficients to isolate engine faults while accounting for uncertainty in gas path measurements. Inputs to the fuzzy inference logic system are measurement deviations of gas path parameters which are transferred directly from the ECM(Engine Control Monitoring) program and outputs are engine module faults. The proposed fuzzy inference logic system is tested using simulated data developed from the ECM trend plot reports and the results show that the proposed fuzzy inference logic system isolates module faults with high accuracy rate in the environment of high level of uncertainty.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.461-467
• /
• 1998

A fermentation system was supplemented with a device for the measurement of the durations of alkali pump feeding for automatic pH control and an A/D convertor for precise monitoring of pH value by computer. A software program was developed to measure buffer capacities from the pH signal and the pH control signal during fermentation. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed correlation to those of estimated by the software sensor. Lacitic acid production was also successfully estimated by the values of buffer capacities measured on-line.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.132.2-132
• /
• 2001

In this paper, we propose an efficient configuration of a system for the remote control of a mobile robot. The interface has a video feedback and runs in standard web environments. For control servers of mobile robot and CCD camera, we use the environment with embedded web server Specific program has been developed in order to grab the images using Microsoft Visual C++ The external camera sends the video signal to a framegrabber in the PC, then this program grabs the images and puts them in shared memory in BMP format. For a video feedback, we use image feedback based on the client pull technique supported by Netscape and Internet Explorer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.456-464
• /
• 2023

In this study, a compact hydrogen liquefaction system was constructed with the aim of creating a data storage and monitoring program for liquid hydrogen production. This program was designed to receive and record signals from diverse control equipment through the LabVIEW software. A range of measurement instruments were devised to collect data, encompassing variables such as flow rate, pressure, temperature, and liquid level. As a result, it was possible to directly check the production of liquid hydrogen by obtaining various data of condensed liquid hydrogen. In addition, it was confirmed that long-term storage of liquid hydrogen is possible by developing automatic ON/OFF through the LabVIEW program.

• Journal of Environmental Health Sciences
• /
• v.39 no.4
• /
• pp.383-390
• /
• 2013

Objectives: We evaluated the effects of an allergy control program on children with atopic dermatitis (AD) in five schools located within Gyeonggi-do. Methods: Based on the results of the 12-month prevalence of AD symptoms from an International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire of all students (n=2109; 1040 boys, 1069 girls) at five randomly selected schools, 227 students with AD symptoms were screened. Finally, 188 students with greater than 1 on SCORAD (SCORing Atopic Dermatitis) determined by a physician were selected. The allergy control program includes education related to allergic diseases, skin prick tests, and SCORAD evaluation, as well as keeping a daily journal to check the usage of moisturizer at least once a day. To determine the effectiveness of the allergy control program, SCORAD evaluation was performed again six weeks later. Results: The most common symptom for 12-month prevalence was rhinorrhea (33.9%), followed by atopic skin lesions (14.8%) and wheezing (4.0%). The 12-month prevalences of the three allergic diseases were higher for boys than for girls, and a significant difference was found for allergic rhinitis (P<0.001). The mean SCORAD index decreased significantly from 26.1 to 17.5 after the completion of the six-week control program (P<0.01). In particular, these differences were more pronounced for the group which used the daily journal (P<0.001). Conclusions: Our findings indicate that the allergy control program including usage of a daily journal as well as regular monitoring could be a promising tool for preventing and alleviating the symptoms of allergic diseases.

• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.317-327
• /
• 1993

This study was carried out to develop a microcomputer-based data acquisition system and software for analysis of engine vibration. Due to this development of system and software, studies on the vibration of engine was able to conduct efficiently. From the display of color monitor, the outputs of test were compared and analysed on zero-base monitoring. The results obtained are summarized as follows : 1. Data acquisition system in microcomputer was designed and programmed and operated accurately. 2. The results of test were easily compared in monitoring of zero-base at color monitor. 3. The system and program developed was able to control the measuring intervals, number of channels, and number of data.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.493-496
• /
• 2008

In case of collapsed or damaged Servicing infrastructure, such as a bridge, tunnel, dam, a severe loss may have to be incurred. Therefore, infrastructure should not be designed and constructed properly but also maintained impeccably. This paper tried to build an intelligent bridge maintenance system that warn the people on bridge and control traffic in the danger. For the purpose, diverse wireless sensor fields are composed and structure's database is established. Also the paper develops a bridge maintenance program. Developed programme is regarded as a good tool to provide the utmost bridge management scenario, which is exactly correspondent with the demand and restraint by improving the present bridge management strategy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.784-789
• /
• 2012

In this paper, a number of anode and reference electrodes that are installed around the target anti-corrosion objects to monitor, appropriate to your situation of a fixed potential and polarization methods can be applied automatically in the system was developed. In particular, this system was configured with a remote electric anti-corrosion automatic control device that have automatically adjust function to uniformal anti-corrosion in all parts of target objects, a corrosion monitoring device to perform the function of corrosion potential detection and a web-based operating program to perform the function of real-time monitoring, control and prediction. Using this system, by preventing oxidative corrosion phenomena can maximize the life of the target anti-corrosion objects.