• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.77-93
• /
• 2015

The idea of using measured dynamic characteristics for damage detection is attractive because it allows for a global evaluation of the structural health and condition. However, vibration-based damage detection for complex structures such as long-span cable-supported bridges still remains a challenge. As a suspension or cable-stayed bridge involves in general thousands of structural components, the conventional damage detection methods based on model updating and/or parameter identification might result in ill-conditioning and non-uniqueness in the solution of inverse problems. Alternatively, methods that utilize, to the utmost extent, information from forward problems and avoid direct solution to inverse problems would be more suitable for vibration-based damage detection of long-span cable-supported bridges. The auto-associative neural network (ANN) technique and the probabilistic neural network (PNN) technique, that both eschew inverse problems, have been proposed for identifying and locating damage in suspension and cable-stayed bridges. Without the help of a structural model, ANNs with appropriate configuration can be trained using only the measured modal frequencies from healthy structure under varying environmental conditions, and a new set of modal frequency data acquired from an unknown state of the structure is then fed into the trained ANNs for damage presence identification. With the help of a structural model, PNNs can be configured using the relative changes of modal frequencies before and after damage by assuming damage at different locations, and then the measured modal frequencies from the structure can be presented to locate the damage. However, such formulated ANNs and PNNs may still be incompetent to identify damage occurring at the deck members of a cable-supported bridge because of very low modal sensitivity to the damage. The present study endeavors to enhance the damage identification capability of ANNs and PNNs when being applied for identification of damage incurred at deck members. Effort is first made to construct combined modal parameters which are synthesized from measured modal frequencies and modal shape components to train ANNs for damage alarming. With the purpose of improving identification accuracy, effort is then made to configure PNNs for damage localization by adapting the smoothing parameter in the Bayesian classifier to different values for different pattern classes. The performance of the ANNs with their input being modal frequencies and the combined modal parameters respectively and the PNNs with constant and adaptive smoothing parameters respectively is evaluated through simulation studies of identifying damage inflicted on different deck members of the double-deck suspension Tsing Ma Bridge.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.4
• /
• pp.557-569
• /
• 2011

Objectives : Based on the system and control activity for the monitoring system made of components for infection control at dental hospitals and infection rate reporting, and the role of trained infection control staff, this study tried to understand approaches to the effective infection control program by surveying infection control at dental hospitals in Korea. Methods : The survey was conducted from December 14,2010 to January 31,2011 for 121 dental hospitals in Korea. For statistical analysis, PASW Statistic 18 was used. Results : And following conclusions were reached. 1. As for the infection control system at dental hospitals, 54.7% has an infection control committee, 58.7% infection control staff, 78.5% infection control rules, and 39.7% annual infection control plan and record. 2. As for surveillance indexes to report infection rates, 50.4% has the reporting system for staff's exposure to infectious disease and needle pricking. The average number of exposures to infectious disease was $0.28{\pm}2.23$ and that of needle pricking was $1.83{\pm}5.39$. 3. As for infection control indexes, it was reviewed whether infection control rules were implemented according to operation agents, general hospitals were more active in staff infection control, and hospitals annexed to a dental university or special legal entity were more active in microorganism control. As for use of personal protection gear, there was no significant difference among operation agents. More than 71% of operators and their assistants said they did not replace their masks between patients. 4. As for personnel indexes for effective infection control staff, most hospitals designated dental hygienists, which was followed by dental doctors (or doctors). Where their workload was reviewed, the ratio of other work such as treatment was relatively higher than that of infection control (n=71). Conclusions : These results show dental hospitals in Korea have a certain level of infection control system. As infection indexes are managed mainly for staff members, patient monitoring is needed, and trained and effective infection control staff should be designated. This study reviewed surveillance, infection control and personnel indexes. And further studies are needed in the future.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.106-119
• /
• 2024

Drug shortage is a persistent phenomenon that poses a public health risk worldwide and occurs due to a range of causes. The purpose of this study is to review key policies to prepare for and respond to drug shortages in selected countries, such as the United States, Canada, and some European countries in order to draw implications. This study reviewed the reports and articles derived from search engines and Google Scholar by using keywords such as drug shortage and stock-out. Over the last decade or so, the United States have strengthened requirements on advance notification for disruption and interruption of drug manufacturing, established the Inter-agency Drug Shortages Task Force to promote the communication and coordination of responses, and expedited drug regulatory processes. Similarly, Canada established the Multi-Stakeholder Steering Committee on drug shortages by involving representatives from central and local governments and private sectors. Canada also adopted a tiered approach to the communication of drug shortages based on the assessment of the severity of the shortage problem and released a detailed information guide on communication. In 2019, the joint task force between the European Medicines Agency and the Heads of Medicines Agencies issued guidelines on drug shortage communication in the European Economic Area. The countries reviewed in this paper focus on communication across different stakeholders for the monitoring of and timely response to drug shortages. The efforts to protect public health from the negative impact of the drug shortage crisis would require multi-sectorial and multi-governmental coordination and development of guidelines.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.177-192
• /
• 2021

The Development Assistance Committee of the Organization for Economic Cooperation and Development discusses the reorganization of the five evaluation criteria of the Public Development Assistance Committee, which are used internationally, and the five evaluation criteria including adequacy, efficiency, effectiveness, impact, and sustainability when assessing public development assistance in 1991. This study is to derive alternatives by applying the evaluation criteria of the Development Assistance Committee of the Organization for Economic Cooperation and Development in the evaluation of the inclusive business program being implemented in Nepal since 2019. As a result of the study, the adequacy of Nepal's inclusive business program was consistent with continuous employment and job creation for vulnerable groups such as disabled and orphan women. Efficiency can be said to be efficient in that processes such as work order and work confirmation are made with an electronic management tool, and delivery of the result is transmitted online, saving time and cost compared to other industries. The effectiveness of this project can be said to be an effective program in that it provides high-quality jobs such as providing specialized computer graphics education for the vulnerable, such as disabled and orphan women in Nepal, and hiring graduates as employees. Sustainability is the point that KOICA's inclusive business program has enabled vulnerable groups in the existing fields of agriculture and manufacturing to engage in the computer graphics industry, and the scalability of movies, characters, education businesses, and role models in other countries.However, considering that the scale of public development assistance will continue to increase in the future, it is necessary to establish a systematic monitoring system and a recirculation system so that the project between the donor and recipient countries can continue.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.383-389
• /
• 2010

The aim of this study was to determine the methylmercury (MeHg) levels in abyssal fish species. The MeHg in the fishes was extracted with hydrochloric acid and toluene and then purified using an L-cysteine solution. The extract was analyzed with a gas chromatography-electron capture detector (GC-${\mu}ECD$) with a thermon Hg-capillary column. The detection limit and the recovery of the method were 0.002 and 84.2-98.5% (mean, 93.4%), respectively. The MeHg content in 492 abyssal fishes ranged from 0.037 to 2.009 mg/kg. The levels of MeHg [range, mg/kg (mean)] were significantly dependent on fish species and presented as the following; 0.157-2.009 (0.546) in Scalloped hammerhead shark, 0.211-0.878 (0.501) in Blue shark, 0.121-0.993 (0.482) in Spiny dogfish, 0.243-0.658 (0.397) in Salmon shark, 0.074-1.958 (0.353) in Blacktip shark, 0.038-0.807 (0.302) in Southern hake, 0.099-0.511 (0.300) in Scorpion fish, and 0.037-0.133 (0.067) in Ling. The monitoring results showed that the estimated weekly intake of MeHg from sharks, Southern hake, and Ling were lower than the provisional tolerable weekly intake recommended by the Joint FAO/WHO expert committee on food additives.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.525-531
• /
• 2011

This study was conducted to examine the contents of lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) in meat and meat products in Korea. The contents of Pb, Cd, As, and Hg in 466 samples of beef, pork, chicken, duck, ham, and sausage were measured using inductively coupled plasma mass spectrometry or a mercury analyzer. Wet ashing and microwave method were compared, and the recovery and reproducibility of the microwave method were better than those of wet ashing for meat and meat products. The recovery of the microwave method was 98.1% for Pb, 104.6% for Cd, and 103.4% for As, respectively. The best result was obtained through digestion using an acid mixture ($HNO_3$/$H_2O_2$, 6:2). Hg content was measured using a mercury analyzer. As a result, the contents of Hg and Cd in samples were lower than those of Pb and As. The average contents of Pb were 0.009 mg/kg in beef, 0.010 mg/kg in pork, 0.006 mg/kg in chicken, 0.007 mg/kg in duck, 0.005 mg/kg in ham, and 0.009 mg/kg in sausage. The average Cd contents were 0.0004 mg/kg in beef, 0.0004 mg/kg in pork, 0.0005 mg/kg in chicken, 0.0012 mg/kg in duck, 0.0015 mg/kg in ham, and 0.0019 mg/kg in sausage. The average As contents were 0.016 mg/kg in beef, 0.004 mg/kg in pork, 0.021 mg/kg in chicken, 0.010 mg/kg in duck, 0.014 mg/kg in ham, and 0.018 mg/kg in sausage. The average Hg contents were 0.713 ${\mu}g/kg$ in beef, 0.902 ${\mu}g/kg$ in pork, 0.710 ${\mu}g/kg$ in chicken, 0.796 ${\mu}g/kg$ in duck, 1.141 ${\mu}g/kg$ in ham, and 1.052 ${\mu}g/kg$ in sausage. Based on the results of the National Health and Nutrition Survey 2005, the levels of dietary exposure to heavy metal contaminants in meat and meat products were compared with the provisional tolerable weekly intake(PTWI) established by the Joint FAO/WHO Expert Committee on Food Additives. The average dietary exposure of the general population from meat and meat products was 0.03-0.2% of PTWI for Pb, Cd, As, and Hg, which indicates a safe level for public health at present.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1251-1262
• /
• 2011

K-company, being in charge of domestic railway construction and facilities management, got a success rate of 41% with the implement of a improvement scheme by prosecuting of 6 Sigma and the achievement of CTQ (Success criteria : more than 0.5 in achievement of CTQ). It is clear that the factors having an effect on achievement of CTQ are the level of project when pushing forward the project(Big Y and small y according to the scope of the work), the degree of interest of an officer in charge like sponsors, and the continuous feedback toward the implement of a improvement scheme. For improvement CTQ achievement, firstly redefine about a type of project. Secondly, derive small y by Big Y and derives a unit work by small y. Then grouping the unit works and achieve Big Y by performing of every unit work as an executive subject. Thirdly organize a committee of subject selection which is supervised by the general manager. Therefore exhibit staff's leadership, for example motivation, by strong incentives. Lastly, provide ongoing learning and enhance system monitoring about a result management of an betterment execution department.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.57-58
• /
• 2001

용수 다소비 산업으로 분류되는 제지공업의 특성 상, 용수사용의 억제 및 용수의 무방류화에 대한 압력이 증가되고 있는 반면, 초지환경은 날로 열악해지고 있는 실정이다. 한 예로써, 용지의 재활용율 및 재사용 비율이 증가함에 따라 원료의 저급화가 심 각한 수준에 이르고 있으며, 이러한 초지환경의 변화는 각질화되고 극도로 미세화된 다량의 미세섬유 발생 및 잡고지로부터 유입되는 점착성 이물질과 무기 충진제의 도입 등을 유발함으로서 제품의 물리적 성질 저하, 탈수부하 증가로 인한 생산성 저하, 약품사용량 증가 등을 초래하여, 결과적으로는 폐수처리장의 부하를 증대시킴과 동시에 청수사용량 및 폐수방류량을 증가시키는 악순환을 되풀이하게 된다. 국내 제지산업이 국제적 경쟁력을 갖추기 위해서는 제품의 증대가 필수적이나, 원료와 설비의존도를 감안할 때, 제품특성과 공정 분을 결정하는 습부공정을 정확히 파악하여 최적 운전조건을 확립하는 것이 가장 경제적이고 용이한 방법일 뿐만 아니라 전체 제지공정의 정정화에도 기여할 수 있을 것으로 판단된다. 일정규모이상의 종이를 생산하는 제지공장은 거의 대부분 컴퓨터로 처리되는 온라인 공정조절 시스템(On-line process control system)을 구비하고 료의 도입에서부터 설비운전 및 제품의 기본적인 품질관리까지 실시간의 자동화되고 안정적인 운전과 관리시스템을 유지하고 있다. 그러나 전체 제지공정 중, 제품 물성과 운전조건의 대부분을 결정하는 습부공정만큼은 아직도 주기적인 분석이 행해지고 있지 않을 뿐만 아니라, 슬러리의 농도나 보류도 정도를 제이하면 분석항목 조차도 변변히 확립되어 있지 않을 실정이다. 이는 다량의 물 속에 존재하게 되는 용전물질(Dissolved solids, DS), 부유물질(Suspended solids, SS), 섬 유(Fibers), 무기 미 세분(Inorganic f fines), 그리고 투입되는 약품간에 발생하는 계면동전현상 및 이러한 현상과 최종 지제 품의 물성간의 상관관계에 대한 이해 정도나 경험 부족에서 기인하는 것으로 생각된다. 1 1983년 미국제지기술연합회(T APpI)의 제지용 첨가제 분과위원회(Papermaking A Additive Committee)에서는 습부공정의 적절한 조절을 위해 어떤 항목들이 필요하며 그 중요도는 어떠한가를 조사하였으며, 그 결과로 전하밀도, 제타전위, 보류도 및 여수 도, 무기 미세분 함량 등이 중요하다고 보고하였다. 그러나 지료의 전기적 특성을 실시 간으로 측정하는 기자재류가 최근에 이르러서야 도입되고 있는 실정이기 때문에 충분 한 현장적용 사례가 보고되지 못하고 있으며, 결과적으로 얻어진 정보와 최종 지제품의 물성 및 초지기 운전조건과의 상관관계를 확립하는 작업결과는 더욱 찾아보기 어렵다. 따라서, 본 연구에서는, 라이너지 제조공장의 습부공정에 투입되는 약품이 지료 의 전기적 성질, 즉 전하밀도와 제타전위에 미치는 영향을 모니터링함으로서 지료의 전기적 성질들과 습부 공정상태와의 상관관계를 살펴보고자 하였다. 본 연구는 다음과 같은 순서로 진행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.432-443
• /
• 2018

This study aims to present the direction of development of a policy framework to solve the problems associated with Smart Cities. For this purpose, first, after investigating the development process of domestic smart cities, we examined various cases of smart city policies being established overseas. Second, we analyzed the existing research into smart cities, in order to understand the relationship between the major issues. Third, an expert interview was conducted based on the identified issues. Fourth, we presented the direction of development of a Smart City policy framework to solve the major problems associated with domestic and foreign smart cities. In the policy framework presented in this research, after subdividing the elements used for solving each problem, we linked them with the smart city components and selected matching executable agents to prepare solutions. Then, once the deliberation process of the National Smart City Committee and the Smart Urban Service Support Organization has been completed, the government will support it financially and politically. It also suggested that it is necessary to perform continuous information gathering and monitoring work, along with the construction of a control tower to strengthen the network effect between smart city related markets. This research has significance in that it presents the procedures required for efficiently responding to the problems arising in the smart city promotion process. It is expected that it will serve as the basis for establishing policies dealing with the development and advancement of domestic smart cities in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.466-475
• /
• 2017

The purpose of this study was to investigate the status of infection control in long term care hospitals. Data were gathered from 156 long term care hospitals that received certification evaluation from May 1, 2016 to July 31, 2016. We used a questionnaire consisting of 85 items regarding the status and perceived importance of infection control. The data were analyzed using the SPSS / WIN 21.0 program. All of the hospitals have infection control regulations, 80.4% of them have an infection control committee and 86.0% of them employ an ICP(infection control practitioner) who holds this position in addition to another. Hand hygiene showed the highest score at 4.47 in the perceived importance of infection control. Employee education and compliance with the validity period of sterilized products showed the highest frequency and perceived importance among the infection control activities. The above results show that almost all of the long term care hospitals have infection control regulations, but that these regulations are not properly implemented, because of the lack of applicable regulations on the policy level. Therefore, it is necessary to develop infection monitoring standards and infection control guidelines for long term care hospitals and provide the infection control practitioners with training in how to apply them.