• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.194-200
• /
• 1999

An elastomeric bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. For axial motion case, the relation between the force applied to the shaft and their relative displacement was considered. In this paper, the relation between the moment applied to the shaft and their relative deformation(angle of rotation) is considered for the torsional motion case. Numerical solutions of the boundary value problem represent the exact bushing response for use in the method for determining the moment relaxation function of the bushing. Solutions also allow for comparison between the exact moment-deformation behavior and that predicted the proposed model. It is shown that the predictions of the proposed moment-deformation relation are in very good agreement with the exact results.

• Journal of Biosystems Engineering
• /
• 제18권3호
• /
• pp.262-269
• /
• 1993

Stress relaxation behaviors of the cucumber under bending moment were tested with UTM at three levels of loading rate and initial deflection ratio. Sample cucumber was selected from three cultivars of cucumber, Cheongjangmadi, Baekdadagi, and Gyeousalicheongjang, because these cultivars are the most popular grown cultivars in Korea. When the bending moment was applied to the cucumber sample, the effective span between simple supports was held a constant value of 116mm with consideration of the selected sample length. The objectives of this study were to develop the rheological models such as linear and nonlinear models of the stress relaxation for the cucumber samples, and to investigate the effects of loading rate and initial deflection ratio on the stress relaxation behavior of the cucumber. The results of this study may be summarized as follows : 1. Stress relaxation behavior of the cucumber could be well described by the generalized Maxwell model for each level of deflection ratio. But the stress relaxation behavior of the sample was found to be initial deflection ratio and time dependent, and it was represented the nonlinear viscoelastic model as a function of initial deflection ratio and time. 2. Stress relaxation behavior of the cucumber samples was very highly affected by the loading rate and the initial deflection ratio. The more loading rate and initial deflection ratio resulted in the more initial bending stress and after stress relaxation progressed more rapidly. 3. At the same test conditions, it was found that the stress relaxation rate of Cheongjangmadi was faster than that of other cultivars.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.356-358
• /
• 1989

Linear and nonlinear complex permittivities have been measured for an alternating copolymer of vinylidene cyanide(VSCN) with vinyl propionale(VPr). It is found that the third order permittivity ${\varepsilon}_3$ depends upon frequency according to a function V ${\varepsilon}_3$/ ${1+(j{\omega}{\tau}_3)^{\beta}}^3$ while the linear permittivity ${\varepsilon}_1$obeys a Debye type function ${\nabla}{\varepsilon}_1$/ {1+$(j{\omega}{\tau}_1)^{\beta}$}. Experimental results are well fitled by predicted functions except at low frequency where dc conduction dominates. The relaxation times ${\tau}_1$ and ${\tau}_3$ at same teperature are nealy equal and depend upon temperature according to WLF form. The relaxation strengths ${\nabla}{\varepsilon}_1$ and ${\nabla}{\varepsilon}_3$ have a peak at the vicinity of glass transition temperature (Tg). The strength ${\nabla}{\varepsilon}_1$ has a value of -9 order and ${\nabla}{\varepsilon}_3$ has a negative value of -25 order. The analysis of mechanism by combined knowledge about linear and nonlinear permittivities and dipole moment gives us an imformation of the electrical and thermal dipolar motions in this copolymer.

• Structural Engineering and Mechanics
• /
• 제11권6호
• /
• pp.637-650
• /
• 2001

A structural analysis of cracked R.C. members under instantaneous or sustained loads and imposed displacements is presented. In the first part of the paper the problem of deriving feasible moment-curvature diagrams for a long term analysis of R.C. sections is approached in an exact way by using the Reduced Relaxation Function Method in state I uncracked and the method suggested by CEB in state II cracked. In both states the analysis of the main parameters governing the problem has shown that it is possible to describe the concrete creep behaviour in an approximate way by using the algebraic formulation connected to the Effective Modulus Method. In this way the calculations become quite simple and can be applied in design practice without introducing significant errors. Referring to continuous beams, the structural analysis is then approached in a general way, applying the Force Method and the Principle of Virtual Works. Finally, considering single members, the structural analysis is performed by means of a graphical procedure based on the application of feasible moment-rotation diagrams which allow to easily solve various structural problems and to point out the most interesting aspects of the long term behaviour of cracked R.C. members with rigid or elastically deformable redundant restraints.

• Korea-Australia Rheology Journal
• /
• 제12권1호
• /
• pp.39-53
• /
• 2000

Using a variety of examples from the recent literature on extensional flow of polymer solutions, this paper shows that simple constitutive equations are unable to capture the diversity of chain conformations in such flows. Such diversity is a feature of extensional flows and arises because deformation leads to significant chain extension. Substantial local extension appears even at low strains and the behaviour of these stretched out portions influences the dynamics of the chain and makes a dominant contribution to the stress. Both the distribution function and the chain conformation appear to follow different paths during stretching and relaxation. As a result the second moment of the distribution function does not contain enough information to correctly predict the dynamics. Resolution of this deficiency in simple constitutive models is one of the challenges for rheology.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.20-24
• /
• 2016

Magnetic properties of bio-magnetic molecule ferritin have been investigated. Two ferritin samples were synthesized under different magnetic fields, 0 and 9.4 T, respectively. This work is focused on the influence of magnetic field on biomineralization process. While magnetization vs. temperature (M-T) data of both samples measured at 1000 Oe are almost identical except for low temperature region (T < 6 K), magnetization vs. field (M-H) data show noticeable difference. From an analysis of M-H data by using a modified Langevin function, we could extract the saturation magnetization $m_0$(T), the effective magnetic moment ${\mu}_{eff}$(T) and the linear susceptibility x(T). The difference between the samples is most prominent in the x(T), whereby the x(T) of the sample prepared at 9.4 T is 1.7 times bigger than that of the other. In addition, from hysteresis and relaxation measurements, we found the sample prepared at 9.4 T showed strikingly smaller coercivity and slower relaxation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.303-308
• /
• 2002

A governing differential equation (GDE) of PSC flexural member with constant eccentricity considering the long-term losses including concrete creep, shrinkage, and PS steel relaxation is derived based on the two approaches. The first approach utilizes the force and moment equilibrium equations derived based on the geometry of strains of the uniform and curvature strains while the second one utilizes the principle of minimum total potential energy formulation. The identity of the two GDE's is verified by comparing the coefficients consisting of the GDE's. The boundary conditions resulting from the functional analysis of the variational calculus are investigated. Rayleigh-Ritz method provides a way to get the explicit form of the continuous deflection function in which the total potential energy is minimized with respect to the unknown coefficients consisting of the trial functions. As a closure, the analytically calculated results are compared with the experiments and show good agreements.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.233-241
• /
• 2012

In this work, Monte Carlo simulation was used to investigate the magnetization properties of thin ferromagnetic films under a perturbation from a supplied heat pulse on one surface of the films. The finite difference method was used to extract the local temperature of each layer of the films as a function of time for various heat source power and heating period. Then, with the variation of the films temperature, Metropolis method was used to update the magnetic moment in magnetic grain, under the Ising framework and using the FePt parameters. With the extracted magnetization profiles, the relationship between magnetization relaxation in accordance with relevant heat parameters and films thickness was reported and discussed, with a purpose to form a database for future use.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.419-422
• /
• 2002

We have studied dielectric properties in the smectic phases of 4-(6-ethoxy-1-trifluoromethyl-hexyloxycarbonyl)-phenyl-4-Nonyloxybiphenyl-4-carboxylat ( TFMEOHPNBC ) having fluorine attached to one of its benzene rings. Homogeneous and homeotropic 1.5 and 5${\mu}m$ thick test cells were prepared to analyze molecular dynamic property. We measured capacitance as a function of temperature in the frequency range between 20 Hz and 100 kHz by using HP4284A LCR meter. We observed that the homogeneous cell has high dielectric constant causing dipole moment in smectic $C^{\ast}$ phase, but we can see the dipole moments are canceled out in antiferroelectric phase. It is found that there are two kind of the relaxation director fluctuation below 100 kHz. The first is ionic or space charge contribution below 10 Hz, and the second is Goldstone mode near 1-2 kHz. We will discuss molecular dynamics in smectic phase from extra information such as x-ray and electrooptic data.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.245-251
• /
• 2013

정보통신설비용 접지전극의 임피던스는 접지전극이 매설되어 있는 토양의 전기적 특성과 밀접한 관계가 있다. 특히 인가된 전계의 주파수에 따른 토양의 유전율과 도전율 특성이 접지전극의 임피던스에 직접적으로 영향을 준다. 접지전극의 임피던스를 계산할 수 있는 상용프로그램은 유전율과 도전율을 수정하여 시뮬레이션하는 것이 불가능하기 때문에 전자계 이론을 적용한 프로그램을 MATLAB으로 구현하였다. 토양의 유전율은 유전완화 모델인 디바이(Debye)식을 적용하였으며, 도전율은 실험에서 얻어진 수식을 다른 논문에서 인용하였다. 시뮬레이션 결과의 신뢰성을 확인하기 위해서 실험계를 구성하여 접지전극의 임피던스를 측정하고, 시뮬레이션 결과와 서로 비교하였다. 그 결과, 토양의 유전율과 도전율 특성을 고려한 본 논문 결과가 고려하지 않은 상용프로그램(NEC) 결과 보다 측정값과 더욱 잘 일치하는 것을 확인하였다.