• KSBB Journal
• /
• v.18 no.1
• /
• pp.65-69
• /
• 2003

Two molecular imprinted polymers (MIPs) were prepared by using pentoxifylline and a mixture of caffeine-theophylline (2:1, mole ratio) as the templates, MAA as the monomer, and EDMA as the crosslinker The obtained polymer particles (particle size 25-35 $\mu\textrm{m}$) were packed into a HPLC column (150$\times$3.9mm). The selectivity and chromatographic characterization of the imprinted polymers were studied using pentoxifylline, caffeine, theophylline, theobromine as samples and acetonitrile as the mobile phase, Both imprinted polymers showed increased affinity for structural analogues. By using a mixture of caffeine-theophylline templates MIPs, good separations of caffeine, theobromine and theophylline were obtained, and pentoxifylline and caffeine were partly separated.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.357-363
• /
• 2006

Monolithic molecularly imprinted columns were designed and prepared by an in-situ thermal-initiated copolymerization technique for rapid separation of tryptophan and N- CBZ-phenylalanine enantiomers. The influence of polymerization conditions and separation conditions on the specific molecular recognition ability for enantiomers and diastereomers was investigated. The specious molecular recognition was found to be dependent on the stereo structures and the arrangement of functional groups of the imprinted molecule and the cavities in the molecularly imprinted polymer (MIP). Moreover, hydrogen bonding interactions and hydrophobic interactions played an important role in the retention and separation. Compared to conventional MIP preparation procedures, the present method is very simple, and its macroporous structure has excellent separation properties.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.522-527
• /
• 2009

A photocrosslinkable polyphosphazene was used for molecular imprinting. We synthesized polyphosphazene (3) having urea groups for complexation with N-carbobenzyloxyglycin (Z-Gly-OH, template) and chalcone groups for cross-linking reaction. As substituents, 4-hydroxycha1cone (1) and N-(4-hydroxyphenyl)-N'-ethylurea (2) were prepared. Choloro groups of poly(dichlorophosphazene) were replaced by the sequential treatment with sodium salts of compounds 1 and 2, and trifluoroethanol. The template molecule was complexed with the urea groups on the polymer chains via hydrogen bonding. A thin polymer film was prepared by casting a solution of the complex of polymer 3 and the template in dimethylformamide on a quartz cell and irradiated with 365 nm UV light to yield a cross-linked film with a thickness of about $16{\mu}m$. The template molecules in the film were removed by Soxhlet extraction with methanol/acetic acid. The control polymer film was prepared in the same manner for the preparation of the imprinted polymer film, except that the template and triethylamine were omitted. In the rebinding test, the imprinted film exhibited much higher recognition ability for the template than the control polymer. We also investigated the specific recognition ability of the imprinted polymer for the template and its structural analogues. The rebinding tests were conducted using Z-Glu-OH, Z-Asp($O^tBu$)-OH, and Z-Glu-OMe. The imprinted film showed higher specific recognition ability for the template and the lowest response for Z-Asp($O^tBu$)-OH.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.8
• /
• pp.1549-1553
• /
• 2008

A molecular imprinted polymer (MIP) using (+)catechin ((+)C) as a template and acrylamide (AM) as a functional monomer was prepared. Acetonitrile was used as the porogen with ethylene glycol dimethacrylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The adsorption isotherms in the MIP were measured and the parameters of the equilibrium isotherms were estimated by linear and nonlinear regression analyses. The linear equation for original concentration and adsorpted concentrations was then expressed, and the adsorption equilibrium data were correlated into Langmuir, Freundlich, quadratic, and Langmuir Extension isotherm models. The mixture compounds of (+)C and epicatechin (EC) show competitive adsorption on specific binding sites of the (+)catechin-MIP. The adsorption concentrations of (+)C, epicatechin (EC), epicatechin gallate (ECG), and epigallocatechin gallate (EGCG), on the (+)catechin-molecular imprinted polymer were compared. Through the analysis, the (+)catechin-molecular imprinted polymer showed higher adsorption ability than blank polymer which was synthesized molecular imprinted polymer without (+)catechin. Furthermore, the competitive Langmuir isotherms were applied to the mixture compounds of (+)C and EC.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.31-32
• /
• 2006

We describe the preparation of nanostructured molecularly-imprinted surfaces using nanomolding on porous alumina. In molecular imprinting functional and cross-linking monomers are copolymerized in the presence of a molecular template, resulting in synthetic receptor materials. The drug propranolol and the dye fluorescein were used as the molecular imprinting templates. Binding studies with imprinted and non-imprinted surfaces revealed specific recognition of the templates and thus the existence of selective binding sites. In addition, the surface properties of the films were studied by water contact angle measurements. It was found that, depending on the monomers used, certain nanostructures induced great changes in the wetting properties of the surface.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1346-1352
• /
• 2007

This article presents an original work on kinetically studying the selective adsorption and recognition by molecularly imprinted polymer (MIP). With S-naproxen as template, the imprinted polymer was prepared. The result indicates that the prepared polymer shows a more complicated sorption toward S-naproxen than toward its enantiomer R-naproxen. The rate constant in the case of template appears to be a variable. There are also significant deviations from the idealized Langmuir model. Related information indicates that these, in logic, can be a result of biomimic structural and functional complements between imprint and the template, which makes the polymer capable of selectively recognizing the imprint species.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.122-126
• /
• 2002

A molecularly imprinted polymer (MIP) having both amidine and imidazole functional groups in the active site has been prepared using p-nitrophenyl phosphate as a transition state analogue (TSA). The imprinted polymer MIP with amidine and imidazole found to have the highest hydrolysis activity compared with other MIPs with either amidine or imidazole groups only. It is postulated a cooperative effect between amidine and imidazole in the hydrolysis of p-nitrophenyl methyl carbonate (NPMC) as a substrate when both groups were arranged in proximity by molecular imprinting. The rate enhancement of the hydrolysis by MIP was 60 folds over the uncatalyzed solution reaction and two folds compared with the control non-imprinted polymer CPI having both functional groups. The enzyme-mimetic catalytic hydrolysis of p-nitrophenyl acetate by MIP was evaluated in buffer at pH 7.0 with $K_{m}$ of 1.06 mM and $k_{cat}$ of 0.137 $h^{-1}$ . . .

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.689-692
• /
• 2001

An imprinting technique with labile covalent interactions has been developed in the design of new polymer catalysts. The template monomer 2 was prepared and copolymerized with DVB or EDMA to provide the polymer with a cavity having the shape of th e transition state of the reaction as well as binding sites for the substrate and catalytic functionalities. The rate of hydrolysis of diphenyl carbonate (1) in the presence of the imprinted polymer IP-DVB-THF was found to be 120 times faster than the background uncatalyzed reaction. A Km of 32 mM and a kcat of 1.8 ${\times}$ 10-3min-1 were observed from Michaelis-Menten kinetics with the imprinted polymer IP-DVB-THF.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.357-360
• /
• 2004

We developed in the present study molecular imprinted polymers (MIPs), using single templates (pentoxifylline, caffeine and theophylline) and mixed-templates (pentoxifylline-caffeine, pentoxifylline-theophylline and caffeine-theophylline). The MIPs were prepared with methacrylic acid (MAA) as the monomer, ethylene glycol dimetharylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The obtained polymer particles (particle size after grinding was about 25-35 ${\mu}$m) were packed into a HPLC column (3.9 mm i.d. ${\times}$ 150 mm). The selectivity and chromatographic characteristics of the MIPs were studied using acetonitrile as the mobile phase at a flow rate of 0.8 mL/min. UV detector wavelength was set at 270 nm. Different single template MIPs showed different molecular recognitions to the templates and the structurally analogues, according to the rigidity and steric hindrance of the compounds. Recognition was improved on the mixed-template MIPs as a result of the cooperation or sum effect of the templates, whereas on the pentoxifylline-theophylline imprinted polymer, the highest selectivity and affinity were obtained. Separations of the test compounds on different polymers were also investigated.