• Membrane Journal
• /
• v.15 no.4
• /
• pp.297-309
• /
• 2005

As a number of potential endocrine disrupting compounds (EDCs) are released into the environment, recently growing attention has been drawn to them. Therefore sensitive and reliable analytical methods are essential to monitor those compounds. In this study, complementary CC-MS and LC-MS were employed to analyze the endocrine disrupters, and the results of two methods were compared for di(2-ethylhexyl)phthalate (DEHP), benzylbutylphthalate (BBP), pentachlorophenol (PCP), and 4,4'-Isopropylidenediphenol (Bisphenol-A, or BPA). The results indicate that it was possible to lower the detection limits of EDCs by LC-MS. Also, LC-MS enabled to identify the EDCs as almost intact molecules. Furthermore, this study presented a nanofiltration membrane (MWCO 250) and a ultrafiltration membrane (MWCO 1,000) filtration system as methods far removing EDCs from drinking water containing $\gamma$-BHC, p,p'-DDE, BBP, p,p'-DDT, DEHP, PCP, and BPA. Cross-flow type nanofiltrations showed $100\%$ removal of EDCs, and the result implies that MWCO 250 nanofilter was sufficient for treatment of EDCs. The ratio of permeate flux to mass transfer coefficient of nanofiltration, high flux ultrafiltration, and low flux ultrafiltration with ultrapure water were 0.67, 3.4, and 0.44, respectively. It was found that nanofiltration and low flux ultrafiltration were operated at a diffusion dominant condition, and the high flux ultrafiltration was operated at a convection dominant condition. Furthermore, a diffusion dominant process attained reasonable rejection of EDCs. The removal in the ultrafiltration was depending on the molecular weight of an EDC, and the filtration was governed by diffusion-dominant hydrodynamic conditions.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.367-371
• /
• 1986

Dynamic and equilibrium properties of n-alkane chains immersed in solvent molecules have been investigated by a molecular dynamics method. The n-alkane chain is assumed to be a chain of elements (CH$_2$) interconnected by bonds having a fixed bond length and bond angle, but each bond of the chain is allowed to execute hindered internal rotation. We studied the effect of the number of the chain elements (N$_c$ = 10, 15 and 20) on the equilibrium properties of the system, e.g., the pair correlation functions between a chain element and solvent molecules, g$_{cs}$(r), and between the chain elements, g$_{cc}$(r), and the configurational properties such as the mean-square end-to-end distance < R$^2$ >, the mean-square radius of gyration < S$^2$ >, and the eigenvalues of the moment-of-inertia tensor < S$_i^2$ > / < S$^2$ > (i = 1, 2 and 3). We also studied the dynamic properties of the system, e.g., the autocorrelation function C(A;t) where A = R$^2$(t), = S$^2$(t), or = ${\vec{V}}(t)({\vec{V}}$ = velocity of the center of mass), and the diffusion coefficient D. The g$_{cs}$(r)'s are almost equal irrespective of the change of Nc while g$_{cc}$(r) becomes larger as N$_c$ increases; The MD computed configurational properties < R$^2$2 > and < S$^2$ > were found to be a little different from the values calculated from the statistical equations of < R$^2$ > and < S$^2$ >, it may be due to the fact that our model for the MD simulations includes a long-range volume effect. From the < S$_i^2$ > / < S$^2$ >, it is found that the chain molecule has a nearly spherical shape irrespective of the variation of N$_c$. For the dynamic properties we found that the C(R$^2$;t) and C(S$^2$;t) of lower N$_c$ decay faster than those of higher N$_c$, while the C($\vec V$;t) of the center of mass in the chain is weakly dependent on the N$_c$. The center of mass diffusion coefficient D$_c$ decreases as N$_c$ increases while the end point diffusion coefficient D$_e$ is nearly equal irrespective of the change of N$_c$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.605-610
• /
• 2006

We have investigated $Al_{0.25}Ga_{0.75}As/In_{0.2}Ga_{0.8}As$ structures for pseudomorphic high electron mobility transistor(pHEMT), which were grown by molecular beam epitaxy(MBE) and consequently annealed by rapid thermal anneal(RTA), using Hall measurement, photoluminescence, and transmission electron microscopy (TEM). According to intensity and full-width at half maximum maintained stable at the same energy level, the quantized energy level in $Al_{0.25}Ga_{0.75}As/In_{0.2}Ga_{0.8}As$ quantum wells was independent of the RTA conditions. However, the Hall mobility was decreased from $6,326cm^2/V.s\;to\;2,790cm^2/V.s\;and\;2,078cm^2/V.s$ after heat treatment respectively at $500^{\circ}C\;and\;600^{\circ}C$. The heat treatment which is indispensable during the fabrication procedure would cause catastrophic degradation in electrical transport properties. TEM observation revealed atomically non-uniform interfaces, but no dislocations were generated or propagated. From theoretical consideration about the mobility changes owing to inter-diffusion, the degraded mobility could be directly correlated to the interface scattering as long as samples were annealed below $600^{\circ}C$ lot 1 min.

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.84-90
• /
• 2005

The influence of plasma parameters on the growth of $In_{0.2}Ga_{0.8}N/GaN$ heterostructures has been investigated using plasma-assisted molecular beam epitaxy. Since plasma ejects plenty of energetic particles with different energy levels and flux density at various rf power levels, plasma modulated both growth rate and optical properties significantly. For instance, surface roughness and the emission spectrum of photoluminescence were degraded at low and high rf power. According to sharp interfaces between epitaxial films and strong peaks observed from photoluminescence spectra, our experimental setup presented optimal operation range of rf powers at around 400W. The phenomena could be explained by the presence of energetic particles modulating the rate of plasma stimulated desorption and surface diffusion, and energetic particles exceeding critical value resulted in the incorporation of defects at subsurface. The optimal rf power regime increased by 100W for $In_{0.2}Ga_{0.8}N/GaN$ growth in comparison with GaN. The effects of rf power were discussed in conjunction with kinetic processes being stimulated by energetic particles.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.391-402
• /
• 2018

The aim of the present work was to provide information about Enterococcus strains isolated from pre-packaged chicken samples in Ankara (Turkey), focusing on their prevalence, phenotypic and genotypic characteristics, and antibiotic resistance. We report the first study on the occurrence of antibiotic resistant enterococci in pre-packaged chicken samples in Ankara. A total of 97 suspicious enterococcal isolates were identified from 122 chicken samples. All isolates were identified to species level by phenotypic and molecular methods. In the 16S rDNA sequence analysis, Enterococcus faecium (61.85%) and Enterococcus faecalis (38.15%) were found to be the most frequently detected Enterococcus spp. Of the 97 isolates tested for hemolytic activity, 12.37% enterococcal strains were ${\beta}$-hemolytic. ${\beta}$-Hemolysin was most prevalent among E. faecium (58.33%) compared to E. faecalis (41.66%). Disk diffusion method was used for determining of antibiotic resistance. The analysis of the antimicrobial resistance of the 97 Enterococcus isolates revealed that the resistance to kanamycin (98.96%), rifampicin (80.41%) and ampicillin (60.82%) was most frequent. Furthermore, resistance to erythromycin (38.14%) and ciprofloxacin (34.02%) was also observed. The frequencies of resistance to tetracycline (9.27%), penicillin G (8.24%), and chloramphenicol (3.09%), gentamicin (2.06%) and streptomycin (1.03%) were low. None of the isolates was resistant to vancomycin. Multi-drug resistance was found in 97.93% of Enterococcus strains. E. faecium strains showed a more resistant phenotype than E. faecalis strains according to the antibiotic resistance levels. The results of this study indicated that chicken meat is a potential reservoir for the transmission of antibiotic resistance from animals to humans.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.139-145
• /
• 2016

In this study, the moisture related hygroscopic characteristics and mechanical properties of epoxy-clay nanocomposites were investigated by experiments as a function of the weight fraction of nanoclay. The hygroscopic and mechanical properties including the moisture saturation amount, moisture diffusivity, adhesive strength, and tensile properties were obtained by moisture absorption test and various tensile tests, respectively. Also, the molecular dynamics (MD) simulation was devised to study of hygroscopic characteristics of nanocomposites and the results were compared to experimental results as a function of the nanoclay content. It was demonstrated that the proposed MD simulation technique can be successfully used for the prediction of the effects of the nanoclay on the moisture diffusion characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3327-3332
• /
• 2011

Antimicrobial peptides have recently gained the much attention because of their ability to make defense system from attacking bacterial infections. Drosocin has been considered as very attractive antibiotic agents because of low toxicity against human erythrocytes and active at the low concentration. We have studied the structureactivity relationship of a glycopeptide drosocin focused on the N-acetyl-D-galactoside at $Thr^{11}$ residue. Based on the radial diffusion assay, we found that the acetylation of carbohydrate moiety increased the antimicrobial activity and the $Pro^{10}$, present in the middle of drosocin plays an important role in the antimicrobial activity. Our results provide a good lead compound for further studies on the design of drosocin-based analogues targeting glyco linked Thr site.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2000

Alkaline sulfite-anthraquinone(AS-AQ) cooking process has been applied to unground pine bark. The properties of the spent liquor such as molecular weight distributions, sulfonic equivalent weights, degree of sulfonation, phenolic hydroxyl groups and kaolin dispersing ability have been investigated to evaluate the possibility of using this liquor as concrete additives or binders. In the case of ground bark meal, more than 90% delignification was achieved at the optimal cooking conditions. However, applying these conditions on unground bark the delignification was slightly retarded. The decrease in the degree of delignification may be attributed to less penetration and diffusion of chemicals during the cooking of the bark. Increasing the cooking temperature only by $5^{\circ}C$ improved the delignification of the bark and about 90% delignification can be achieved. These results indicate that bark can be used successfully during AS-AQ cooking without any mechanical or physical pretreatment. The properties of lignin or polyphenol sulfonates in the spent liquor after AS-AQ cooking of the bark were compared with Sunflo-R, which is commercial lignosulfonate(CLS) prepared from wood. The weight average molecular weights(Mws) estimated by gel-filteration chromatography was found to be ranging from 1,200~1,800. These are considerably lower than those in CLS. Lignin or polyphenol sulfonates in the spent liquor of bark and CLS have similar degree of sulfonation, but the phenolic hydroxyl group was 1.8 times higher than CLS. Moreover, the dispersing abilities of the spent liquors were better than that of CLS, especially after 0.1% addition to kaolin suspension.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.371-378
• /
• 2016

An aim of current study was to investigate the prevalence and the mechanism of quinolone-resistance in E. coli isolates obtained from chicken cecum in Korea. In addition, multilocus sequence typing (MLST) was also performed for the molecular characterization of E. coli isolates. In an antimicrobial susceptibility test by the disk diffusion method, the 63.5% (54/85) of E. coli isolates showed the resistance to quinolone group of antimicrobial agents. All of the 54 E. coli isolates showing resistant to quinolone group had sense mutations in gyrA gene and point mutations at the $57^{th}$, $80^{th}$, or $84^{th}$ residues in parC gene were detected in 90.7% of the isolates. Interestingly, E. coli ST was closely related to amino acid substitutions in parE gene. Our results indicated that the long-term use of antimicrobial agents in food-producing animals was strongly associated with a prevalence of antimicrobial resistance in commensal Enterobacteriaceae, suggesting the need for continuous surveillance and monitoring of antimicrobial resistant determinants in bacterial isolates from food animals.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.35-40
• /
• 2006

Self-assembled InAs/GaAs quantum dots (QDs) were grown by the atomic layer epitaxy (ALE) and molecular beam epitaxy (MBE) techniques, The structure and the thermal stability of QDs have been studied by high resolution electron microscopy with in-situ heating experiment capability, The ALE and MBE QDs were found to form a hemispherical structure with side facets in the early stage of growth, Upon capping by GaAs layer, however, the apex of QDs changed to a flat one. The ALE QDs have larger size and more regular shape than those of MBE QDs. The QDs collapse due to elevated temperature was observed directly in atomic scale, In situ heating experiment within TEM revealed that the uncapped QDs remained stable up to $580^{\circ}C$, However, at temperature above $600^{\circ}C$, the QDs collapsed due to the diffusion and evaporation of In and As from the QDs, The density of the QDs decreased abruptly by this collapse and most of them disappeared at above $600^{\circ}C$.