• BMB Reports
• /
• v.32 no.1
• /
• pp.86-91
• /
• 1999

The sprT gene encoding Streptomyces griseus trypsin (SGT) was introduced into Streptomyces lividans TK24 and Streptomyces lividans 1326 to study which strain would be better to overexpress the extracellular proteinase. Various media with different compositions were also used to maximize the productivity of SGT in heterologous hosts. The SGT productivity was best when the transformants of S. lividans TK24 and 1326 were cultivated in R2YE medium, and their relative trypsin activity of the culture broth measured with an artificial chromogenic substrate, N-${\alpha}$-benzoyl-DL-arginine-${\rho}$-nitroanilide, were 382 units/ml and 221 units/ml, respectively. They produced high levels of SGT in GYE medium but relatively lower than those in R2YE medium, and negligible amount of SGT was produced in Ferm, RASF, LIVID, and NDSK media. Considering non-SGT associated activity in Pronase powder, it was estimated that the transformant of S. lividans TK24 can produce SGT in R2YE 3.5 times more than the amount by S. griseus 10137 from which the sprT gene had been originated. The growth of S. lividans reached the maximum level of cell mass at 5 d of culture, but SGT production started in the stationary phase of cell growth and kept increasing until the ninth day of culture in R2YE medium, but in GYE media the productivity reached at the maximum level at 7 d of cultivation.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.998-1008
• /
• 1994

Copolyeters consisted of p-oxybenzoly, naphthalene isomer and dimethyldisiloxyl group in different comonomer sequences were synthesized by solution polycondensation and characterized. The naphthalene isomers used in this study were of the 1,4 1,5, 2,6 and 2,7 naphthylene units. The inherent viscosities of the polymers were between 0.27~0.42dl/g and all of the polymers, with the exception of the 2,7-ordered copolyester, showed enantiotropic nematic behavior. Annealing the copolyesters resulted in increasing molecular weights and degree of crystallinity of crystallizable compositions. Ordered copolyesters exhibit significant differences in thermal transitions, thermal stability, crystalline properties and liquid crystallinity when compared with the properties of the corresponding radom copolyesters.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.1
• /
• pp.48-53
• /
• 1999

The study was carried out to investigate the effects of hydrolysis conditions such as treatment times and concentrations on the solubility of insoluble sericin using the hydrochloric acid solution. When insoluble sericin was hydrolyzed by HCl solution, the solubility was increased with the higher treatment concentration. As the results of electrophoresis of sericin powder obtained by the HCl treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by HCl solution were about 4.2~5.9 and average molecular weights(M.W.) were about 470~670. The longer hydrolysis time reduced the whiteness of sericin powder. As the results of amino acid analysis, the amino acid compositions of the sericin powder from HCl treatment were sililar to that of insoluble sericin, but Tyr. and Arg. were not detected in the powder obtained by HCl treatment. In DSC analysis, thermal deformation and pyrolysis peak located at near 220$^{\circ}C$ and 330$^{\circ}C$.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.458-462
• /
• 2009

Silk fibroin is a structural protein from Bombyx mori and can be sulfated to provide biofunctional polypeptides showing antiviral and anticoagulating activities. However, the sulfated fibroins have not been characterized enough to present their compositions and structures. In this report, sulfation reaction was investigated by varying the reaction temperature and sulfuric acid concentration and analysis of the resulting peptides were carried out. The degree of sulfation was proportion to sulfuric acid concentration but the maximum product yield was obtained at $60^{\circ}C$ and 5% of sulfuric acid concentration. FT-IR spectrum, UV absorption and NMR spectrum support that o-sulfate ester was formed at the hydroxyl group of serine and tyrosine residues. Size exclusion chromatography identified that sulfated fibroin was composed of a highly hydrolyzed polypeptide mixtures and peptides of relatively higher molecular weight.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.4
• /
• pp.273-281
• /
• 1987

In this work the antioxidant effects of browning reaction products prepared by xylose-tryrtophan reaction system were discussed. The antioxygenic brown pigments were separated by solvent extraction, and column chromatography and isolated by gel filteration. The functional groups of the brown pigments which had antioxidant activity were examined. The brown pigments extracted with methanol showed antioxidant effect and were fractionated in 5portions on DEAE-cellulose column. The elutes with methanol: acetic acid(10:30 v/v sol n(A), methanol: chloroform(95:5 v/v) sol n(C), and chloroform: acetic acid(10:30 v/v) sol n(E) only showed antioxidant activity and their compositions were 22.43, 21.51 and $34.43\%$ respectively. When each fraction on DEAE-cellulose column was reseparated on Sephadex LH-20 column, 2 fractions were obtained from portion A and C respectively. Molecular weights of A, C and E fraction of brown pigments were from 2,600 to 3,700. By elucidation of IR spectra, the pigment fractions which showed a strong antioxidant activity were tearing the indole group. It is suggested that the antioxidant function of the brown pigment is due to hydroxy and amino group. A higher activity of the brown pigment fraction E might be attributed to carboxylic acid or carboxylic ester compounds.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.388-393
• /
• 1999

Polyurethane foams are polymeric material with repeating groups of urethane and urea. When these are heated with ethylene glycol and K acetate catalyst at $200^{\circ}C$, the transesterification of them leads to soluble products. The mechanisms of the reaction were investigated from the molecular weight and the component distributions of the products by GPC and IR analysis. The degradation of the urethane groups was faster than that of urea groups in transesterification reaction. K acetate catalyst accelerated the rate of the transesterification because it had a high ionization tendency. Each reaction, using K or Sr acetate as a catalyst, progressed in the same reaction path but yielded different compositions in products because of the difference of the reaction rate.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.224-231
• /
• 2007

Polyurethane (PU) was prepared with the compositions of polytetramethylene glycol (PTMG) having two different molecular weight (250, 1000 g/mol). The optimum composition of PTMG 250/1000 was 60/40 based on the mechanical properties. PU/organoclay nanocomposites were prepared with several kinds of organoclay. The mechanical properties of nanocomposite prepared with 93A were considerable. The improvement in tensile strength and modulus for PU/organoclay nanocomposite with the application of ultrasound compared to the PU/organoclay nanocomposite without the application of ultrasound was factors of 1.2, and hardness (shore A type) increased from 90 to 95. The difference in thermal degradation was not observed. The results of transmission electron micrographs and X-ray measurements suggest that the intercalated organoclay in PU matrix was observed.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.608-615
• /
• 1994

The isolation, purification and characterization of a carotenoprotein from the carapace of Pnaeus orientalis were investigated. The carotenoprotein was purple with broad λmax between 480, 409, 318 and 280 nm. Apparent structures were estimated by using X-ray diffractometry and scanning electron microscope, respectively. The molecular weight of the carotenoprotein complex had been determined by GPC and PAGE. The heavier complex, designated the $\alpha$-form (M.W = 170 KDa), was dissociated to a major subunit, $\beta$-form (M.W = 42 KDa). SDS-PAGE of $\alpha$-form showed apparently oligomeric pattern, and also $\beta$-form gave two polypeptides corresponding to 22 KDa and 19 KDa, respectively. The amino acid of the two proteins $({\alpha}-and\;{\beta})$-form, lipid and free fatty acid compositions were described. The prosthetic groups of the carotenoprotein were confirmed by TLC, IR, $^1H$-NMR, MS and various organic reactions as astaxanthin, astaxanthin monoester and astaxnathin diester.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.862-870
• /
• 2010

Cyperus rotundus L. is a perennial herb that was found to be dominating an area in northeast Brazil previously contaminated with petroleum. In order to increase our knowledge of microorganism-plant interactions in phytoremediation, the bacterial community present in the rhizosphere and roots of C. rotundus was evaluated by culture-dependent and molecular approaches. PCR-DGGE analysis based on the 16S rRNA gene showed that the bacterial community in bulk soil, rhizosphere, and root samples had a high degree of similarity. A complex population of alkane-utilizing bacteria and a variable nitrogen-fixing population were observed via PCR-DGGE analysis of alkB and nifH genes, respectively. In addition, two clone libraries were generated from alkB fragments obtained by PCR of bulk and rhizosphere soil DNA samples. Statistical analyses of these libraries showed that the compositions of their respective populations were different in terms of alkB gene sequences. Using culturedependent techniques, 209 bacterial strains were isolated from the rhizosphere and rhizoplane/roots of C. rotundus. Dot-blot analysis showed that 17 strains contained both alkB and nifH gene sequences. Partial 16S rRNA gene sequencing revealed that these strains are affiliated with the genera Bosea, Cupriavidus, Enterobacter, Gordonia, Mycoplana, Pandoraea, Pseudomonas, Rhizobium, and Rhodococcus. These isolates can be considered to have great potential for the phytoremediation of soil with C. rotundus in this tropical soil area.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.469-476
• /
• 2017

Membrane separation is a technology of low energy consumption. Membranes made of zeolites are of great interest because their fixed and open pores in the size of small molecules inside crystalline structures allow separation processes under harsh conditions. While zeolite NaA (LTA-type) is industrially used for dewatering of organic solvents, its pore size and thermal and hydrothermal stability can be tuned by exchange of framework and extra-framework elements. SOD with pores of only 0.28 nm is of great interest for $H_2$- und $H_2O$-separation and also can be tuned by ion exchange. Zeolites open the opportunity to create membranes of adapted separation behavior for small molecules in conditions of surrounding technical processes.