• 한국안광학회지
• /
• 제1권1호
• /
• pp.65-72
• /
• 1996

플라스틱 안경렌즈의 소재에 관한 일반적인 특성을, 광학적 특성과 polymer의 구조관련시켜 설명함으로써 그 본질적인 부분에 대한 해설을 하였다. PMMA의 경우 ${\delta}$ 전자에 기반을 둔 1중결합에 의해 폴리머의 골격이 유지되고 이들에 의한 빛의 흡수현상은 매우 적은 것이었다, 폴리머의 굴절율은 주로 분자굴절, 분극율에 의해 지배되었고, Cl, Br, I 같은 할로겐기나 벤젠고리를 함유한 경우 굴절율이 높았다. 굴절율의 온도의존성은 무기그라스보다 환경의존성은 컸고, 폴리머내에서의 산란은 결정영역의 불균일한 분포와 관계가 있었다.

• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.178-183
• /
• 1984

본 연구에서는 108개의 아르곤 입자가 Lennard-Jones의 포텐셜함수로 상호작 용하고 있는 고밀도 액체계에 높은 전단율울 작요시켜 외력에 의하여 물성의 변화가 일어나고 있는 비평형상태의 액체가 나타내는 현상을 분자동력학을 이용하여 미시적 인 관점에서 고찰하므로써, 높은 전단하중으로 인하여 윤활유 내부에서 전단응력이 발생하고, 이완되는 과정과 이로 인하여 점성이 저하하는등 비평형상태하의 물성변화 를 예측하는데 도움이 되고자 한다.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.214-217
• /
• 2017

AlSb is a promising material for optical devices, particularly for high-frequency and nonlinear-optical applications. We report the effect of growth temperature on structural properties of AlSb grown on GaAs substrate. In particular we studied the surface of AlSb with the growth temperature by atomic force microscopy, and concluded that optimized growth temperature of AlSb is $530^{\circ}C$. We also show the result of real-time monitoring of AlSb growth by in situ ellipsometry. The results of the structural study are good agreement with the previous reported ellipsometric data.

• 폴리머
• /
• 제27권4호
• /
• pp.307-312
• /
• 2003

고밀도 폴리에틸렌 (HDPE)과 초고분자량 폴리에틸렌 (UHMWPE)을 혼합하여 중공사막을 제조하고, 이의 형태구조와 물성 변화를 조사하였다. 분자량 측정과 FT-IR을 이용한 분석 결과, 상품화된 중공사막(Sterapore)은 고분자량의 HDPE로 제조되었으며, 표면은 친수성 고분자인 비닐 알코올/비닐 아세테이트 공중합체로 코팅되어 높은 수투과도를 갖는 이유를 규명하였다. HDPE/UHMWPE 블렌드에서 UHMWPE의 혼합 한계 조성비는 10 wt% 이하이며, UHMWPE의 분산성을 높이기 위하여 혼합과정에서 광유를 도입하여야 할 것으로 판단되었다. 제조된 HDPE/UHMWPE 블렌드 중공사의 기계적 물성과 막 구조는 Sterapore와 유사하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.15-19
• /
• 2006

A ferredoxin adsorbed hetero self-assembled layer was fabricated on chemically modified Au substrate, 4-Aminothiophenol (4-ATP) was deposited onto Au substrate and then N-succinimidyl-3-[2-pyridyldithio] propionate (SPDP) was adsorbed on the 4-ATP layer, since SPDP was used as a bridging molecule for ferredoxin adsorption, Ferredoxin/SPDP/4-ATP structured hetero layer was constructed because of strong chemical binding of ferredoxin, SPDP, and 4-ATP, The surface of the ferredoxin-adsorbed SPDP/4-ATP layer was observed by scanning tunneling microscopy, The hetero film formation was verified by surface plasmon resonance measurement. The current flow and rectifying property based on the scanning tunneling spectroscopy I-V characteristics was achieved in the proposed hetero layer. Thus, the hetero layer structure of ferredoxin functioned as a molecular diode with rectifying property, The proposed molecular diode can be usefully applied for the development of molecular scale electronic devices.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.640-645
• /
• 2006

Polyethylene of bimodal molecular weight distribution was irradiated with an electron beam. The thermal and mechanical properties were examined by DSC, small and wide angle X-ray scattering and static tensile test according to the crystal morphology of the irradiated samples. The crystal morphology change upon irradiation, as revealed by wide angle X-ray scattering, correlated well with the changes in melting enthalpy, whereas the lamellar thickness and the amorphous gap thickness remained virtually unchanged at irradiation doses up to 500 kGy. Crosslinks in the crystal domains became evident at an energy level of 250 kGy, resulting in reduced crystallinity and crystal size of the (110) and (200) planes. The samples became stiff and brittle with increased irradiation dose, which seem to be more relevant to the amount of cross links than the crystal morphology changes.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.755-760
• /
• 2008

The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1527-1535
• /
• 2012

Selection of the most informative molecular descriptors from the original data set is a key step for development of quantitative structure activity/property relationship models. Recently, mutual information (MI) has gained increasing attention in feature selection problems. This paper presents an effective mutual information-based feature selection approach, named mutual information maximization by replacing collinear variables (MIMRCV), for nonlinear quantitative structure-property relationship models. The proposed variable selection method was applied to three different QSPR datasets, soil degradation half-life of 47 organophosphorus pesticides, GC-MS retention times of 85 volatile organic compounds, and water-to-micellar cetyltrimethylammonium bromide partition coefficients of 62 organic compounds.The obtained results revealed that using MIMRCV as feature selection method improves the predictive quality of the developed models compared to conventional MI based variable selection algorithms.

• Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.160-166
• /
• 2007

본 연구는 초미세 분체기술을 이용하여 쌀 전분의 입자구조 파괴가 이루어졌을 때 분자구조적, 물리적 변화가 어떻게 이루어지는지를 구명하고자 하였다. 분쇄 후 쌀 전분의 평균직경은 약 20% 감소가 이루어졌으며 비표면적은 25% 증가하였다. 분쇄 전후의 쌀 전분에 대한 분자량분포를 GPC(gel permeation chromatography)로 측정한 결과 Peak II의 면적이 36.5%에서 59.5%로 상승하였다. 분쇄 전후 손상전분 정도는 각각 16.40%와 99.2%로 나타났다. 분쇄 전에 비하여 분쇄 후 쌀 전분의 물결합능력, 용해도와 광 투과도에서도 월등히 높았다. $30^{\circ}C$에서 20 rpm을 기준으로 분쇄후의 쌀 전분의 겉보기점도는 상대적으로 분쇄 전의 7% 수준에 불과하였으며 측정온도가 높아짐에 따라서 차이는 더욱 커졌다.

• Journal of Pharmaceutical Investigation
• /
• 제41권3호
• /
• pp.179-184
• /
• 2011

This study aimed to confirm the effect of molecular weight (MW) in solid dispersion of carvedilol with poly-vinylpyrrolidone (PVP) of various MW. Solid dispersion of carvedilol with PVP was prepared by spray-drying method. Scanning electron microscopy (SEM) was used to analyze the surface of solid dispersion samples. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) were used to analyze the crystalline of solid dispersion. Fourier transform infrared spectroscopy (FT-IR) was used to analyze the change of chemical structure characteristic of solid dispersion. DSC and XRD show that drug crystalline was changed. FT-IR revealed that chemical structure of solid dispersion comparing the chemical structure of drug was changed. The dissolution studies of solid dispersion presented at simulated gastric juice (pH 1.2). The dissolution rate of solid dispersion was dramatically enhanced than pure drug and the MW of PVP has an effect on the release property of carvedilol in solid dispersion. In conclusion, the present study has confirmed the effect of MW of PVP on release property of solid dispersion formulation of carvedilol with PVP.