• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.76-86
• /
• 2007

This study was conducted to investigate the effects of formaldehyde to urea (F/U) mole ratio on thermomechanical curing of UF resin adhesives with different F/U mole ratios. Thermomechanical curing of these UF resin adhesives was characterized using parameters of dynamic mechanical analysis (DMA) such as the gel temperature, maximum storage modulus, and peak temperatures of storage and loss modulus. As the F/U mole ratio decreased, the gel temperature of UF resin adhesives increased. The maximum storage modulus as an indicator of the rigidity of UF resin adhesives decreased with decreasing F/U mole ratio. The peak temperature of tan $\delta$ increased with decreasing F/U mole ratio, indicating that the vitrification occurred faster for high F/U mole ratio of UF resin adhesives than for the one of lower F/U mole ratio. These results partially explained the reason why UF resin adhesives with lower F/U mole ratio resulted in relatively poor adhesion performance when they were applied.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.631-638
• /
• 1988

Effect of Ca/P mole ratio on the precipitates and powder properties of hydroxyapatite was investigated. Powder and precipitates of hydroxyapatite were synthesized by the reaction of Ca(NO3)2.4H2O and (NH4)2 HPO4 solutions at room temperature. The pH value and compositions (Ca/P mole ratio) in starting solutions were 11 and 1.64-1.79(or 1.85), respectively. Rodlike hydroxyapatite precipitates were agglomerated together. The average agglomerated particle size was ranged from 2-8${\mu}{\textrm}{m}$. Among compositions, the minimum agglomerated particle size was shown at the Ca/P mole ratio 1.75. CO2 was contained in hydroxyapatite powders and these ultrafine powders had poor crystallinity. The specific surface area and specific total pore volume of hydroxyapatite powders were 104-137$m^2$/g and 0.396-0.467cc/g, respectively. When the Ca/P mole ratio was 1.75, these values were the maximum. And water content increased with the Ca/P mole ratio(Ca/P mole ratio>1.67). In most cases, hydroxyapaite was stable to 130$0^{\circ}C$. However, in the case of Ca/P mole ratio 1.64, hydroxyapatite was changed to $\alpha$-whitlockite at 120$0^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.123-131
• /
• 1989

Hydroxyapatite powders were syntehsized by the reaction of Ca(NO3)2.4H2O and (NH4)2HPO4 in aqueous solution. The effect of the Ca/P mole ratio in the starting solution on the sintering of the powders and its microstructure was studied. When the Ca/P mole ratio in the starting solution was 1.69, the relative density of the sintered bodies was more than 95%. The sinterability was decreased as the Ca/P mole ratio in the starting solution was increased (Ca/P mole ratio >1.67). Hydroxyapatite sintered bodies obtained from the Ca/P mole ratio=1.69 had very excellent bending strength. The best bending strength was obtained at 110$0^{\circ}C$ and its value was 1220kg/$\textrm{cm}^2$. The average grain size was 0.277${\mu}{\textrm}{m}$. Most of sintered bodies were almost shown 100% hydroxyapatite phase. However, in case of the Ca/P mole ratio=1.64 hydroxyapatite was decomposed to $\alpha$-whitlockite above 120$0^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.67-75
• /
• 2007

As a part of abating the formaldehyde emission of urea-formaldehyde (UF) resin adhesive by lowering formaldehyde to urea (F/U) mole ratio, this study was conducted to investigate properties of UF resin adhesive with different F/U mole ratios. UF resin adhesives were synthesized at different F/U mole ratios of 1.6, 1.4, 1.2, and 1.0. Properties of UF resin adhesives measured were non-volatile solids content, pH level, viscosity, water tolerance, specific gravity, gel time and free formaldehyde content. In addition, a linear relationship between non-volatile solids content and sucrose concentration measured by a refractometer was established for a faster determination of the non-volatile solids content of UF resin. As F/U mole ratio was lowered, non-volatile solids content, pH, specific gravity, water tolerance, and gel time increased while free formaldehyde content and viscosity were decreased. These results suggested that the amount of free formaldehyde strongly affected the reactivity of UF resin. Lowering F/U mole ratio of UF resin as a way of abating formaldehyde emission consequently requires improving its reactivity.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.155-160
• /
• 1990

Al-rich Mg-Al spinel single crystals were grown by Verneuil process using oxygen and hydrogen flame. Spinel single crystals were grown in chemical compositions from MgO : Al2O3 mole ratio 1 : 1 to 1 : 3. Mole ratio 1 : 1 was hard to be grown and mole ratio 1 : 2.5 and 1 : 3 were grown well. Selecting well-grown mole ratio 1 : 3, seeds were prepared having [100], [110] and [111] orientation respectively. Growth rate were highest in [100] orientation and lowest in [111] orientation.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.63-72
• /
• 2008

As a part of abating formaldehyde emission of urea-formaldehyde (UF) resin adhesive, this study was conducted to investigate chemical structures of UF resin adhesives with different formaldehyde/urea (F/U) mole ratios, using carbon-13 nuclear magnetic resonance ($^{13}C$-NMR) spectroscopy. UF resin adhesives were synthesized at four different F/U mole ratios such as 1.6, 1.4, 1.2, and 1.0 for the analysis. The analysis $^{13}C$-NMR spectroscopy showed that UF resin adhesives with higher F/U mole ratios (i.e., 1.6 and 1.4) had two distinctive peaks, indicating the presence of dimethylene ether linkages and methylene glycols, a dissolved form of free formaldehyde. But, these peaks were not detected at the UF resins with lower F/U mole ratios (i.e., 1.2 and 1.0). These chemical structures present at the UF resins with higher F/U mole ratios indicated that UF resin adhesive with higher F/U mole ratio had a greater contribution to the formaldehyde emission than that of lower F/U mole ratio. Uronic species were detected for all UF resins regardless of F/U mole ratios.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1493-1494
• /
• 1998

We have investigated the influence of Ti/Ba mole ratio in the characteristics of the modified $BaTiO_3$ systems with Ca addition. The specimens were fabricated with variations in Ti/Ba mole ratio between 0.995 and 1.01, and sintered in the temperature range between $1325^{\circ}C$ and $1375^{\circ}C$. When Ti/Ba mole ratio was 1.005 and sintering temperature was $1350^{\circ}C$, the breakdown voltage shows 260[V /mm].

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.165-171
• /
• 2002

This study was to investigate the adhesion properties of fancy veneer and base panels and formaldehyde emission of wood-based floorings bonded with urea-melamine formaldehyde adhesives. We focused on stoichiometric mole ratio of reactive functional groups. The urea-melamine formaldehyde adhesives were made at twelve different formaldehyde/urea-melamine mole ratios. The interlaminated shear strength and formaldehyde emission of wood-based floorings bonded with selected adhesive among these adhesives were examined. The results showed that the bonding properties were high and the formaldehyde emission was low as the adhesive consisted of stoichiometric mole ratio of formaldehyde/urea-melamine. Interlaminated shear strengths of HDF(High Density Fiberboard) flooring were over 14 kgf/cm² at all mole ratios. At the mole ratio of 1.0, HDF flooring showed low value of formaldehyde emission of 953 mg/L. Interlaminated shear strengths of Plywood flooring were high, 14.02 kgf/cm² at mole ratio of 1.4. At the mole ratio of 1.0, Plywood flooring showed low value of formaldehyde emission of 0.26 mg/L.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.125-130
• /
• 2014

This study used transmission electron microscopy (TEM) to investigate the micro-morphological features of two formaldehyde to urea (F/U) mole ratio liquid urea-formaldehyde (UF) resins with three hardener levels as a function of the curing time. The micro-morphological features of the liquid UF resins were characterized after different curing times. As a result, the TEM examination revealed the presence of globular/nodular structures in both liquid UF resins, while spherical particles were only visible in the low F/U mole ratio resins. The high F/U mole ratio liquid UF resins also showed extensive particle coalescence after adding the hardener, along with the appearance of complex filamentous networks. When the resins were cured with a higher amount of hardener and longer curing time, the spherical particles disappeared. For the low mole UF resins, the particles tended to coalesce with a higher amount of hardener and longer curing time, although discrete spherical particles were still observed in some regions. This is the first report on the distinct features of the crystal structures in low F/U mole ratio UF resins cured with 5% hardener and after 0.5 h of curing time. In conclusion, the present results indicate that the crystal structures of low F/U mole ratio UF resins are formed during the curing process.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1233-1236
• /
• 2010

2,3-Dichloro-1,4-naphtoquinone 1 compound was reacted with octadecanethiol 2 in two different mole ratio. Compound 3 was obtained from the reaction of 1 and 2 in 1:2 mole/mole ratio. Compounds 7 and 8 were obtained from reaction of 1 and 2 in 1:1 mole/mole ratio and known compound 9 was synthesized as by-product in this reaction. Novel compounds 5a-e were obtained from reaction of 1 and related thiols 4a-e. Known compounds 6c and 6e were synthesized as by-product in this reaction. The structures of the compounds were characterized by elemental analysis, UV-vis, FTIR, $^1H$-NMR, $^{13}C$-NMR and Mass spectroscopies.