• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.27.1-27.12
• /
• 2019

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.114-118
• /
• 2012

인접면의 우식증으로 인해 인접면의 공간 소실과 후방치아의 근심 경사가 발생한 본 증례에서 치아의 보철 수복 전 교정용 링의 삽입과 임시 전장관의 수정을 통해 치간 공간의 획득과 치축의 개선을 시행할 수 있었다.

• 대한치과보철학회지
• /
• 제51권4호
• /
• pp.252-260
• /
• 2013

연구 목적: 치과 임플란트가 소개된 이후로 단일 치아 상실에 따른 임플란트 수복에 관한 성공적인 연구 결과들이 보고되고 임상적으로도 널리 사용되고 있다. 구강내의 다양한 부위에 따른 연구들이 있어 왔으나, 교합력이 강한 구치부 특히 하악 구치부에서 단일 임플란트에 관한 연구가 필요할 것이다. 본 연구는 하악의 제1대구치와 제2대 구치 부위에 식립된 단일 임플란트의 생존율에 관해 연구, 분석하였다. 연구 대상 및 방법: 2002년부터 2009년까지 대구광역시 소재의 7개 치과의원에서, 하악 제1, 2대구치에 단일 임플란트 치료를 받은 환자 284명에게 식립된 308개의 임플란트를 대상으로 하였다. 하악 제1대구치에 168개의 임플란트가 식립되었고, 하악 제2대구치에 140개의 임플란트가 식립되었다. 이들 임플란트는 식립위치, 환자의 성별, 연령, 임플란트의 직경 및 길이에 따라 분석하였다. 결과:하악 제1대구치에서는 4개의 임플란트가, 하악 제2대구치에서는 10개의 임플란트가 실패하였다. 하악 제1대구치에서는 97.6%, 하악 제2대구치에서는 92.9%의 성공률을 나타내었다. 환자의 연령, 성별, 식립방법, 임플란트의 직경 등에 따른 차이는 관찰할 수 없었다. 결론: 하악 제1대구치 단일 임플란트의 생존율은 하악 제2대구치 단일 임플란트의 생존율보다 높게 나타났다. 이는 하악 제2대구치 부위의 골질이 좋지 않고, 하악의 해부학적인 구조로 인해 하악 제2대구치 부위에 과도한 교합력이 가해질 우려가 있기 때문이라 생각된다.

• Journal of Korean Dental Science
• /
• 제4권1호
• /
• pp.1-5
• /
• 2011

Purpose: Exact knowledge of the location and dimension of the pulp chamber help to maintain the pulp healthy during operative procedure and also reduces the risk of perforation of pulp chamber during root canal treatment. This in-vivo study was carried out to measure critical morphology of pulp chamber of mandibular molar using intra-oral periapical radiograph. Materials and Methods: Mandibular molar teeth of 56 patients were evaluated. The mandibular molar teeth whose pulp chamber was not violated by caries, restoration, fracture crown and those having closed apex were included in the study. The intraoral periapical radiographs were taken with paralleling angle technique using radio-opaque grid with 1 mm space. This grid was placed directly on the film. Results: In 94% of the mandibular first molars specimens the pulp chamber ceiling was at the level of the cemento-enamel junction. The measurements showing the lowest percentage variance were buccal cusp to furcation (approximately 11%) and buccal cusp to pulp chamber ceiling (approximately 15%). The distance from the cusp tip to pulp chamber ceiling height was approximately 6.0 mm, the distance from the pulpal floor to the furcation was approximately 3.0 mm, and the average height of a pulp chamber was 1.5 to 2.0 mm. Conclusion: The exact knowledge of distances of pulp chamber from various anatomical landmarks helps in proper assessment of root canals and ultimately avoids the failure of root canal treatment.

• Journal of Periodontal and Implant Science
• /
• 제50권4호
• /
• pp.260-267
• /
• 2020

Purpose: The aim of this study was to compare the prevalence, amount, and rate of supraeruption of the maxillary second molar according to sex, age, and history of periodontitis. Methods: Data were collected retrospectively from the charts and panoramic radiographs of 65 patients who were scheduled to undergo implant placement at the site of the mandibular second molar. The amount of supraeruption of the maxillary second molar and the alveolar bone level of the neighboring teeth were measured on digital panoramic radiographs. The prevalence was evaluated in each group, and univariate and multivariate logistic regression analyses were used to identify factors influencing the prevalence of supraeruption. The amount and the rate of supraeruption were compared between pairs of groups using the Mann-Whitney U test. For all tests, P values <0.05 were considered to indicate statistical significance. Results: Supraeruption occurred in 78% of the patients. The prevalence of supraeruption was affected by sex, age, and history of periodontitis. The mean amount of supraeruption was 0.91 mm and the mean rate of supraeruption was 0.14 mm/month. The amount and the rate of supraeruption showed no significant differences according to sex, age, or the distance from the cementoenamel junction to the alveolar bone crest (P>0.05). Conclusions: These results show that the amount of supraeruption on the maxillary second molar was similar to the thickness of the enamel on the occlusal surface. When a single implant is scheduled to be placed on the mandibular second molar, supraeruption of the antagonist should be considered.

• 대한소아치과학회지
• /
• 제48권2호
• /
• pp.176-183
• /
• 2021

이 연구는 소아 환자에서 생활치수치료를 시행한 미성숙 제1대구치의 술전 요인들을 분석하고 생활치수치료와의 상관관계를 알아보고자 하였다. 2014년 5월부터 2020년 1월까지 치료가 시행된 523명, 1,242개의 미성숙 제1대구치에 대해 조사하였다. 생활치수치료 후 수복치료를 받은 미성숙 제1대구치를 실험군으로, 생활치수치료 없이 수복치료만 받은 미성숙 제1대구치를 대조군으로 설정하였다. 연령, 성별, 치아의 위치, Molar-incisor hypomineralization (MIH), 우식 와동 위치 및 과거 수복치료 병력에 대해 조사하였다. 생활치수치료군은 대조군에 비하여 MIH가 5.56배, 근심 와동이 3.39배, 원심 와동이 8.73배 더 많은 것으로 나타났다. 미성숙 영구치의 생활치수치료를 예방하기 위해 제1대구치가 맹출된 후 MIH의 조기 진단 및 적극적인 관리와 근, 원심면 우식에 대한 예방적 처치가 필요할 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제41권4호
• /
• pp.262-270
• /
• 2016

Objectives: This study aimed to evaluate the healing rate of non-surgical endodontic treatment between C-shaped and non-C-shaped mandibular second molars. Materials and Methods: Clinical records and radiological images of patients who had undergone endodontic treatment on mandibular second molars between 2007 and 2014 were screened. The periapical index scoring system was applied to compare healing outcomes. Information about preoperative and postoperative factors as well as the demographic data of the patients was acquired and evaluated using chi-square and multinomial logistic regression tests. Results: The total healing rate was 68.4%. Healing rates for the mandibular second molar were 70.9% in C-shaped canals (n = 79) and 66.6% in non-C-shaped ones (n = 117). The difference was not statistically significant. Conclusions: The presence of a C-shaped canal in the mandibular second molar did not have a significantly negative effect on healing after treatment. Instead, proper pulpal diagnosis and final restoration were indicated as having significantly greater influence on the healing outcomes of C-shaped and non-C-shaped canals, respectively.

• 대한소아치과학회지
• /
• 제39권2호
• /
• pp.199-205
• /
• 2012

비록 기성 금속관 수복이 유구치 수복 시 가장 효과적이고 내구성 있는 방법으로 인지되어 왔지만, 그것은 치과의사들에게 있어서 복합한 시술이 가지는 침습적 특징과 행동 조절 문제와 같은 명확한 단점을 가지고 있다. 전통적인 기성 금속관 수복 방법에 대한 대안으로 1988년 Hall technique이 소개되었는데, 이것은 국소마취, 우식제거, 치아삭제 없이 지대치위에 시멘트가 채워진 금속관을 합착하는 것으로 특징지어진다. 몇몇 보고들에 따르면, 그 비외상적인 특성은 전통적인 수복보다 어린이에게, 특히 저연령 어린이에게 더 적은 불편감과 스트레스를 준다. 또한 Hall technique은 치과의사, 어린이, 그리고 부모에게 효과적이고 받아들일 만 하다고 보고되어 왔다. 이 증례에서, 4세 5개월, 4세 10개월, 6세 4개월의 어린이 3명의 제1유구치를 Hall technique을 이용하여 기성 금속관 수복을 시행하였다. 3~6개월간의 정기검진 후 현재까지 치수, 치아, 또는 연조직에 명확한 합병증 없이 임상적으로 성공적인 결과를 보여주고 있다. 그러나, Hall technique이 모든 어린이, 우식 유구치, 또는 치과의사에게 적합하지는 않다는 것을 유념하고, 적응증의 엄격한 선택과 지속적인 정기 검진이 요구된다. 결론적으로, Hall technique은 효능에 대한 잠재적인 의구심과 일부 명확한 제한점에도 불구하고 특히 저연령 어린이나 장애 어린이의 우식 유구치 수복 방법에서 효과적이고 현실적인 최소침습적 대안이 될 수 있다.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.42-47
• /
• 1998

This study was performed to compare the bonding mechanism of glass ionomers. In this study, hybrid glass ionomers were used for restoration(Fuji II LC, GC, Japan) as the material of choice. Two different etching solutions were used in this study, 35% phosphoric acid and 10% polyacrylic acid. The effect of two different conditioners to dentin surface of a primary molar was studied and compared by using scanning electron microscope. Further, the interface of the dentin surface and the hybrid glass ionomers were examined.