• Title/Summary/Keyword: Molar restoration

Search Result 145, Processing Time 0.025 seconds

A STUDY ON MARGINAL ADAPTATION OF READY-MADE STAINLESS STEEL CROWN TO THE PRIMARY MOLAR (기성금관수복 유구치의 변연 적합도에 관한 연구)

  • Lee, Sun-Kyung;Lee, Gwang-Su;Kim, Chong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.23 no.2
    • /
    • pp.389-400
    • /
    • 1996
  • In Class II amalgam restoration in deciduous molar, failure rate and incidence of recurrent caries are high as children become older. In order to preserve deciduous molars till the physiologic exfoliation time, stainless steel crown is a choice of the treatment. As a result of a careless treatment, such as overhanging margin, poor marginal adaptation, poor proximal contour and inadequate mesiodistal width give rise to interfering eruption of the adjacent teeth, recurrent caries and chronic gingival irritation and insufficient arch length respectively. In this study, 252 s.s. crowned teeth extracted due to physiologic exfoliation or periapical lesion. The purpose of this study is to analyze the marginal adaptation of stainless steel crown to the deciduous molar in order to obtain better clinical result. The results were as follows : 1. Between the length of s.s. crown and the marginal gap of crown, positive correlations were shown. 2. Largest amount of marginal gap was shown at buccal side in upper deciduous molars and lower first deciduous molar, lingual side in lower second deciduous molar. But no significant diffrence were found statistically compared to second most largest one. 3. Incidence of exposed restoration and recurrent caries were higher in proximal surface than buccal/lingual surface. And extension of restoration below the margin of s.s. crown gives rise to higher rate of recurrent caries. 4. Defect of contour was found in 34%, frequently found in lower 1st deciduous molar and upper 1st deciduous molar. 5. Marginal polishing defects were found in 23%. 6. Ledge was formed in 10% especially in lower 1st deciduous molar and lower 2nd deciduous molar. 7. 16% of the teeth had wear facet due to traumatic occlusion, 7% of them had occlusal perforation.

  • PDF

A CASE REPORT ON THE SPACE MAINTAINER USING PRIMARY MOLAR HEMISECTION (유구치의 편측치아절제술을 이용한 공간유지장치)

  • Kim, Jun-Hyun;Lee, Jae-Ho;Kim, Seang-Oh;Shon, Heung-Ky
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.24 no.4
    • /
    • pp.776-780
    • /
    • 1997
  • Patient with alveolar abscess due to dental caries with severe alveolar bone loss, severe tooth mobility, root resorption need extraction of tooth because it is impossible to carry out pulp treatment and restoration by using conventional method. Early loss of primary molar might cause masticatory interference, extrusion of opposing tooth, problem in maintaining space and interference on eruption of permanent tooth. Especially, early loss of primary second molar before the eruption of permanent first molar might cause space closure by mesially erupted permanent first molar and impaction of second premolar. In such a case, distal shoe space maintainer and removable space regaining appliance was the first choice of treatment. But, distal shoe space maintainer need precise adaptation and might cause chronic inflammation if the oral hygiene is poor. In a case using removable space regaining appliance, patient's cooperation is most important. If the distal root of primary second molar is comparably sound and alveolar abscess with alveolar bone loss is localized at mesial root, hemisection should be carried out for precise guide to eruption of the permanent first molar, restoration of masticatory fuction and solution to the discomfort of the patient

  • PDF

A study on the design wax up technique for mandibular molar occlusion surface (하악구치 교합면의 design 조각법에 관한 연구)

  • Moon, Hee-Kyung
    • Journal of Technologic Dentistry
    • /
    • v.24 no.1
    • /
    • pp.107-126
    • /
    • 2002
  • The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

  • PDF

A Study on the design waxup technique for maxillary molar occlusion (상악구치 교합면의 design 조각법에 관한 연구)

  • Moon, Hee-Kyung
    • Journal of Technologic Dentistry
    • /
    • v.21 no.1
    • /
    • pp.97-114
    • /
    • 1999
  • The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

  • PDF

Immediate implantation for single mandibular first molar restoration: clinical case report (하악 제1대구치 단일 수복을 위한 발치 즉시 임플란트의 임상증례)

  • Park, Cheol-Woo
    • Journal of the Korean Academy of Esthetic Dentistry
    • /
    • v.30 no.1
    • /
    • pp.4-12
    • /
    • 2021
  • Immediate implantation is widely applied as it is recognized as a useful implant treatment in dental clinic due to its various advantages as well as being able to shorten the treatment period. Immediate implant treatment was performed on 5 patients who needed extraction of the mandibular first molar for various reasons, shortening the overall treatment period, and obtaining satisfactory results. Immediate implantation after extraction is a high-level treatment that requires proper initial fixation at the exact location of the extraction socket and the surrounding soft tissues, but is considered to be a clinically very useful prosthetic restoration method

5 YEARS EVALUATION OF COMPOSITE RESIN RESTORATION ON PERMANENT FIRST MOLAR IN CHILDREN (어린이 제 1 대구치 복합 레진 수복물의 5년 후 임상평가)

  • Kim, In-Young;Kim, Jae-Moon;Jeong, Tae-Sung;Kim, Shin
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.35 no.1
    • /
    • pp.110-117
    • /
    • 2008
  • Clinical performance of resin-based composite material depends on case selection and on the proficiency of the operator. Especially, composite resin restoration on permanent first molar in children have more limitations clinically than adult patients according to stage of tooth eruption and patient's compliance. This study was designed to evaluate the clinical performance of posterior composite resin restoration in children after 5 years. 35 teeth of 16 patients who were received composite resin restoration on permanent first molar in Department of Pediatric dentistry, Pusan National University Hospital between January 2001 and December 2001 were evaluated based on Modified USPHS criteria. From the finding in this study, following conclusions can be made. 1. 6 teeth(17%) of 35 teeth was replaced, so 5-years survival rate of posterior composite resin restoration is 82.9%. 2. As results of each evaluation criteria, on color match, anatomic form, surface roughness, sensitivity/ discomfort, ideal A grade score was 86.2%, 93.1%, 86.2%, 86.2%, clinically accepted B grade score was 13.8%, 0%, 13.8%, 10.3%. On marginal adaptation and marginal discoloration, A grade score was 13.8%, 44.8% and B grade score was 79.3%, 34.5% and secondary caries rate was 20.7%. 3. 69.1% of teeth (20 teeth) was clinically accepted on all evaluation criteria.

  • PDF

Repair Rate of Composite Resin Restorations in Permanent First Molar in Children Under 12 Years Old (12세 이하 아동의 제1대구치 복합레진 수복의 재수복률에 관한 연구)

  • Jeong, Yunyeong;Nam, Okhyung;Kim, Misun;Lee, Hyo-seol;Choi, Sungchul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.45 no.3
    • /
    • pp.370-377
    • /
    • 2018
  • Although the frequency of composite resin restoration in children is gradually increasing, there are insufficient researches about the rate of composite resin repair in children. The purpose of this study was to evaluate the repair rate of composite resin restorations in the permanent first molar in children under 12 years old. This study retrospectively analyzed 169 children treated with composite resin restoration in the permanent first molar from May 2014 to April 2015. According to the location of the tooth, the repair rate was higher in the mandible than maxilla and in the left than right. In the classification of restoration, the repair rate was the highest in the class II cavity, and the repair rate was the lowest in the restoration of the occlusal surface only. Repair rate in two years was 14.8%, and repair hazard ratio decreased with age. The most common reason of composite resin restoration replacement was the secondary caries (74.1%). Within the limits of study, the repair rate of children was higher than that of adult due to the characteristics of children. Therefore, dentists should understand these characteristics and try to reduce the repair rate of composite resin composite restorations.

Relationship between Pre-Eruptive Buccal Pit Radiolucency and Restoration in Mandibular First Molar (하악 제1대구치 협측 소와의 맹출 전 방사선 투과상과 수복의 연관성)

  • Jung, Seo-Hyun;Song, Ji-Soo;Shin, Teo Jeon;Hyun, Hong-Keun;Kim, Young-Jae;Kim, Jung-Wook;Lee, Sang-Hoon;Jang, Ki-Taeg
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.45 no.1
    • /
    • pp.57-64
    • /
    • 2018
  • Pre-eruptive intracoronal resorption (PEIR) is a developmental defect in the crown of a pre-eruptive tooth. The purpose of this study was to investigate the relationship between the size of the pre-eruptive buccal pit radiolucency, which is suspected as PEIR on a panoramic radiography, and the need for restoration after the eruption of a mandibular first molar. The experimental group included 35 mandibular first molars, in which lesions requiring definite restoration were observed during eruption. The control group consisted of 64 sound mandibular first molars after eruption. The sex, age, tooth position, tooth formation stage, size of the pre-eruptive buccal pit radiolucency, and restoration methods in the experimental group and control group were examined. Compared with the control group, the experimental group showed a statistically significant difference in the size of the buccal pit before eruption. The buccal pit size for predicting the need for restoration was further examined by receiver operating characteristic curve analyses, and the area under the curve was $0.813{\pm}0.047$. If radiolucency is observed at the buccal pit of the mandibular first molar before eruption, periodic observations and post-eruption examinations are required.

MOLAR RESTORATION WITH AN ORTHODONTIC BAND (교정용 밴드를 이용한 구치부 수복)

  • Lee, Suk-Woo;Lee, Jae-Ho;Choi, Hyung-Jun;Sohn, Hyung-Kyu;Kim, Seong-Oh;Choi, Byung-Jai
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.36 no.1
    • /
    • pp.91-95
    • /
    • 2009
  • The use of stainless steel crowns are indicated for restoration of primary or permanent molars with proximal dental caries, extensive dental caries, or previous pulp treatment with increased danger of tooth fracture. Stainless steel crowns were introduced by Humphrey in 1950. For their improved durability, longevity, and success rate, they have been strongly considered for restoring extensive and multi-surfaced dental caries of molars in pediatric dentistry. However, they also have shortcomings, such as possibility of pulpal exposure or damaging proximal surface of adjacent teeth. In addition, when oversized stainless steel crowns are used, eruption of the adjacent permanent teeth may be disturbed by their prominent margin. As a means to compensate the shortcomings of stainless steel crowns, use of orthodontics bands may be considered. It is an alternative restoration method, where an orthodontic band is placed on a tooth first and cavity is restored with filling material, such as composite resin, glass ionomer, or amalgam. The use of an orthodontic band is indicated for molar restoration with cervical dental caries, extensive dental caries, enamel hypoplasia, or previous pulp treatment. Because it requires shorter chair time compared to stainless steel crown, its application is very useful for children with poor behavior. However, restoration using an orthodontic band requires good oral hygiene after its application. This case report illustrates the conservative restoration of primary molars and permanent molars with extensive dental caries using orthodontic bands.

  • PDF

Assessment of Wear Resistance in Tooth-Colored Materials for Primary Molar Crown Restoration in Pediatric Dentistry

  • Hyun Seok Kang;Yooseok Shin;Chung-Min Kang;Je Seon Song
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.51 no.1
    • /
    • pp.22-31
    • /
    • 2024
  • The objective of this study was to assess the wear resistance of tooth-colored materials used in crown restoration for primary molars with a chewing simulator. In this study, four groups-three experimental groups and one control group-were included. They consisted of three-dimensional (3D) printed resin crowns (NextDent and Graphy), milled nano-hybrid ceramic crowns (MAZIC Duro), and prefabricated zirconia crowns (NuSmile). Twelve mandibular second molar specimens were prepared from each group. In the wear experiment, 6.0 × 105 cycles were conducted with a force of 50 N, and a 6 mm-diameter steatite ball was used as an antagonist. The amount of wear was calculated by comparing the scan files before and after the chewing simulation using 3D metrology software, and the worn cross-section was confirmed by scanning electron microscopy (SEM). The resin and ceramic groups did not exhibit any statistically significant differences. However, compared to other crown groups, the zirconia crown group demonstrated notably reduced levels of wear (p < 0.05). In SEM images, layers and cracks were observed in the 3D-printed resin crown groups, which differed from those in the other groups.