• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.341-347
• /
• 2002

This study was designed to determine the location of the mandibular canal on lower molar areas. Thirty-three patients were examined with multi-planar reformatted CT scan($Dentascan^{(R)}$). Three kinds of measurements were performed. The first was the distances between the upper border of the mandibular canal and the root apices of the first and second molars, the second was the distance between the cortical plate of the mandible and mandibular canal, and the last was the location of the mandibular canal in the buccolingual plane. The obtained results are as follows 1. The distance between the root apices of lower molars and the superior border of mandibular canal was largest at the mesial root of the first molar, and shortest at the distal root of the second molar(p<0.05). 2. The longest distance between the outer surface of the buccal cortical plate of the mandible and mandibular canal was measured from the distal root of the second molar, and this distance decrease gradually mesially(p<0.05). 3. The distance between the mandibular base and inferior border of mandibular canal was longest at the distal root of the second molar, and shortest at the mesial root of the first molar(p<0.05). 4. The location of mandibular canal was lingually positioned in relation to the axis of teeth and alveolar ridge in molar areas.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.93-104
• /
• 2000

Orthodontic treatment in conjunction with second-molar extraction has been a controversial issue among orthodontists over many decades. The aim of this study was to investigate the treatment effects of upper second molar extraction cases. The sample included 19 upper second molar extraction orthodontic cases(ten Angle's Class I's and nine Class II's, average age=13Y 6M) cared at Kyung-Hee University Department of Orthodontics. Lateral cephalometric radiographs were taken before and immediately after treatment. Seventy-nine points were digitized on each cephalogram and 38 cephalometric parameters were computed comprising 22 angular measurements, 13 linear measurements, and 3 facial proportions. The data obtained from each malocclusion group were analyzed by paired t-test. The statistical results disclosed that there was no significant change in skeletal pattern after treatment except for that accountable by growth while there was statistically significant change in dentoalveolar and soft tissue patterns. There were no significant changes in Bjork sum, posterior facial height /anterior facial height and lower anterior facial height /anterior facial height. No significant changes in anteroposterior position of maxilla and palatal plane were manifested. Although facial axis and lower facial height was slightly increased and the mandible was rotated backward and downward, there was no remarkable change in the mandibular plane. There were statistically significant changes in distal movement of upper first molar, molar key correction and overjet reduction while there was no change in the occlusal plane. The upper lip was slightly retracted simultaneously with slight increase in nasolabial angle. These results signify that distalization of upper dentition with the second molar extraction does change occlusal relationship without gross modifications in the craniofacial skeletal configurationson. Henceforth the second molar extracted would be recommended to treat severe anterior crowding and protrusion with minor skeletal discrepancy.

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.29.1-29.11
• /
• 2021

Objectives: This study was conducted to compare the post-fracture survival rate of endodontically treated molar endodontically treated teeth (molar ETT) restored with resin composites or crowns and to identify potential risk factors, using a retrospective cohort design. Materials and Methods: Dental records of molar ETT with crowns or composite restorations (recall period, 2015-2019) were collected based on inclusion and exclusion criteria. The incidence of unrestorable fractures was identified, and molar ETT were classified according to survival. Information on potential risk factors was collected. Survival rates and potential risk factors were analyzed using the Kaplan-Meier log-rank test and Cox regression model. Results: The overall survival rate of molar ETT was 87% (mean recall period, 31.73 ± 17.56 months). The survival rates of molar ETT restored with composites and crowns were 81.6% and 92.7%, reflecting a significant difference (p < 0.05). However, ETT restored with composites showed a 100% survival rate if only 1 surface was lost, which was comparable to the survival rate of ETT with crowns. The survival rates of ETT with composites and crowns were significantly different (97.6% vs. 83.7%) in the short-term (12-24 months), but not in the long-term (> 24 months) (87.8% vs. 79.5%). Conclusions: The survival rate from fracture was higher for molar ETT restored with crowns was higher than for ETT restored with composites, especially in the first 2 years after restoration. Molar ETT with limited tooth structure loss only on the occlusal surface could be successfully restored with composite restorations.

• The Journal of the Korean dental association
• /
• v.10 no.2
• /
• pp.129-130
• /
• 1972

The author have observed a case of supernumerary molar occurred in the buccally between second and third molar of the mandibular in 38 years old. The macroscopical findings were resembled to small second lower premalar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.89-100
• /
• 2005

The purpose of this study was to analyze the morphometrics of primary second molar and permanent first molar. Samples were consisted of normal occlusion in the primary dentition(50 males and 50 females) and permanent dentition(43 males and 43 females). Their upper and lower plaster casts were used and their measuring points were decided, through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), fitting standard horizontal plane were made for measuring the intercuspal distance, volume of intercuspal area and section curve. The results were as follows; 1. Average distance from the fit plane to the cusp tips of mandibular primary second molar was smaller than any other tooth. (0.05-0.09 mm in male and 0.04-0.09 mm in female). 2. Intercuspal distances of mandibular primary second molar and permanent first molar were larger in male than in female. Especially, there was statistical significance in primary second molar(p<0.05). 3. Intercuspal distance between distobuccal and distolingual cusp was larger in maxillary primary second molar, except cross intercuspal distances. And distances between distal and distolingual cusp, in mandibular primary second molar, between mesiolingual and mesiobuccal cusp, in maxillary first molar, and between distolingual and mesiolingual cusp, in mandibular first molar were larger than any other intercuspal distance. 4. Volume of intercuspal area of primary second molar and permanent first molar was larger in mandible than in maxilla and that of permanent first molar was 1.40-1.75 times of primary second molar (p<0.05). Also it was larger in male than in female, but there was no statistical significance. 5. In most cases, section curves were wider and deeper in permanent dentition than in primary dentition. Except cross intercuspal distances, in maxilla, section curve between mesiobuccal and mesiolingual cusp was the deepest in both dentition. In mandible, section curve between distobuccal and distal cusp was the deepest in permanent dentition and between distolingual and distal cusp was the deepest in primary dentition.

• The Journal of the Korean dental association
• /
• v.17 no.7 s.122
• /
• pp.525-528
• /
• 1979

958 healthy Korean children aged from 2 to 11 years old (male: 500 female:458) were studied on the root resorption of the mandibular first deciduous molar. The Results were as follows: 1. The resorption of mandibular first deciduous molar in female was earlier than male. 2. The patterns of the initial resorption of mandibular first deciduous molar were as follows Distal root is resorbed by the Successor ; 55.92% Both roots are resorbed by the Successor simultaneously ; 30.51% Mesial root is resorbed by successor ; 6.33% Mesial root is resorbed by the mandibular first bicuspid and canine ; 4.08% Bifurcation area is resorbed by the successor; 3.16% 3. The Exfoliation period of mandibular first deciduous molar was 10 years 1month in female and 10 years 4 months in male.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.19-24
• /
• 1986

The author performed radiographical analysis of the third molar dentition and characteristic relation to anatomical oral structure. For this purpose 506 orthopantomagraph film, male 283cases and female 223 cases, aged from 15 to 30 years were evaluated by means of Winter's classification in conjunction with some other methods. Through the study following results were obtained; 1. The eruption of(equation omitted) were found in 229 cases followed by 61 cases of(equation omitted) and 45 cases showed no evidence of eruption. 2. The classification based on the relation of ramus to distal portion of the 2nd molar revealed class Ⅱ, 460 cases (61.8%) and 182 cases (24.5%) were class Ⅲ. 3. Parallelism between long axis of mandibular third molar and the second molar were found in 302 cases (40.8%) and mesial inclination of the third molar were 280 cases (37.6%). 4. Average inclination degree among these cases showed 138.62±12.56°.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.246-252
• /
• 2007

$BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.45-52
• /
• 2006

Five low molar ratio urea-formaldehyde (LUF) resins were synthesized in this study. The effects of molar ratio, free formaldehyde content, and catalysts on the curing characteristics of LUF resins were studied by measuring its free formaldehyde content, pH value change after catalysts added, curing rate, and pot life, observing its cured appearance, and analyzing its thermal behavior. The results indicate that: 1) The LUF resin with lower molar ratio than 1.0 can still cure; 2) Free formaldehyde content is not the main factor in affecting curing rate of LUF resin; 3) Compared with ammonium chloride as a traditional catalyst, persulfate salts markedly accelerate the curing rate of LUF resin, and result in the different appearance; 4) the addition of sodium chloride to catalysts can accelerate the curing rate of LUF resin, but the effect is moderate.

• The Journal of the Korean dental association
• /
• v.42 no.1 s.416
• /
• pp.7-14
• /
• 2004

Molar extrusion is a quite common problem in prosthodontic patients. It is caused due to the loss or infraocclusion of opposing teeth. A more conservative approach than reduction of the coronal part of extruded tooth is to intrude the malaligned molar orthodontically. Several authors have presented the cases of molar intrusion, by cither removable or fixed appliances. However, the design of those appliances was complex so that many teeth were included as an anchorage unit. This increased the patient's discomfort inevitably. Moreover, the results could be unpredictable. Instead of these conventional methods, skeletal anchorage has been suggested for ideal force system to intrude a molar without any side effects. Many recent clinical reports presented the cases using microscrew or miniplate as a direct anchorage, which included some limitation. The purpose of this report is to introduce the indirect skeletal anchorage for intrusion of extruded maxillary molar.