• 한국환경농학회지
• /
• 제10권2호
• /
• pp.133-137
• /
• 1991

Fly ash가 토양(土壤)의 화학성(化學性) 및 물리성(物理性)에 미치는 영향(影響)을 규명(糾明)하기 위하여 Fly ash를 증류수(蒸溜水) 및 0.5N-acetic acia로 추출하여 각종 무기성분(無機成分)의 용출량(溶出量)을 측정(測定)하고 Fly ash를 토양(土壤)에 처리(處理)한 경우 토양물리성(土壤物理性)의 변화(變化)를 조사(調査)하였다. Fly ash의 주요결정광물(主要結晶鑛物)은 mullite와 석영(石英)이었다. 증류수(蒸溜水)보다 Acetic acid로 Fly ash를 추출(抽出)할 경우 훨씬 많은 양(量)의 무기성분(無機成分)이 용출(溶出)되었다. 이때 Si 및 Al는 증류수(蒸溜水)에 의(依)해서 거의 용출(溶出)되지 않았다. 토양(土壤)의 투수성(透水性) 및 포장용수량(圃場容水量)은 Fly ash를 토양(土壤)에 10% 이하(以下) 첨가(添加)하면 향상(向上)되었으나 그 이상(以上) 처리시(處理時)에는 저하(低下)되었다. 토양(土壤)의 신축성(伸縮性) 및 경도(硬度)는 Fly ash를 10% 이하(以下)로 처리(處理)할 경우 큰 영향(影響)을 받지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.15-22
• /
• 1997

The effectiveness of presteaming for improving CCA treatability on refractory Japanese larch heartwood was investigated in this study. Presteaming was effective on improving treatability, and the extent of improvement was dependent on moisture contents of wood specimen and steaming conditions. Green wood showed higher average value in both preservative retention and penetration than dry wood, and steaming under pressure conditions also had higher treatability than steaming at atmospheric conditions. The degree of improvement for treatability was increased with the extension of steaming period. Treatability of dry wood pres teamed under pressure conditions more than 6 hours and green wood for 3 hours was similar to that enhanced by conventional incising. Presteaming green wood under pressure conditions more than 6 hours was more effective than conventional incising in improvement of CCA treatability, and resultant treatability satisfied a minimum value required for CCA-treated wood for being used at the regions of hazard class H3 and H4. In addition, an improvement of treatability by presteaming was due to an increase in permeability resulted from the degradation of hemicelluloses within aspirated pit membrane and cell wall, not the removal of extractives from pit membrane. The reduction in strength, measured as longitudinal compressive strength, due to pres teaming was related with the degradation of hemicelluloses, and was increased as steaming conditions were severe. The degree of strength reduction associated with presteaming treatment to obtain required treatability could be quantified from the relatively good relation between the increase in treatability and the decrease in strength.

• 지질공학
• /
• 제11권3호
• /
• pp.245-254
• /
• 2001

처분덮개는 중.저준위 방사성폐기물 천층처분시설의 성능 유지에 중요한 역할을 하므로 여러가지 시험과 장기관측을 통한 처분덮개의 성능실증 연구는 시설의 안전성 확보에 불가결한 요소이다. 처분덮개의 기본적인 성능요건으로는 불투수성, 건전성, 열화에의 저항력 및 유지보수의 용이성 등을 고려할 수 있다. 이러한 성능요건을 단일층으로는 충족하기 어려운 점을 고려하여 HELP(Hydrologic Evaluation of Landfill Performance) 코드를 사용한 물수지 평가를 통해 상부 보호층, 중간 배수층 및 하부 저투수층 등으로 구성된 다층덮개 개념을 도출하였다. 처분덮개 내에서의 수분이동특성을 규명하기 위해 TDR(Time Domain Reflectometry)과 Tensiometer를 사용하여 각각 함수비와 matric potential의 변화를 3$\times$3$\times$3.3m 크기의 6개 시험고에서 장기관측 할 수 있도록 설계하였다.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.1-10
• /
• 2013

본 연구는 포천에서 채취된 화강풍화토를 불산용액을 이용하여 인공적으로 풍화를 진행시켜서 풍화도 변화에 따른 화강풍화토의 입자파쇄 특성을 연구하였다. 이를 위해 조성광물 분석을 통한 풍화지수 결정 후, 입도분석, 표준다짐시험 및 변수위 투수시험을 실시하였다. 본 연구결과는 풍화가 진행되면서 전체입경분포에서 입자파쇄가 진행되었으며, 입경 $D_{10}$과 $D_{50}$에 대한 비표면적을 비교한 결과 입경 $D_{50}$ 이하의 작은 입경분포에서 입자파쇄가 활발하게 진행된 것으로 나타났다. 또한 다짐에 의한 입자파쇄 결과는 최적함수비 부근에서 입자파쇄가 최대치를 보였고 풍화가 진행됨에 따라서 비표면적 증분비가 감소하는 것으로 보아 풍화지수가 높을수록 입자파쇄에 둔감한 것으로 나타났다.

• 한국가구학회지
• /
• 제28권3호
• /
• pp.248-258
• /
• 2017

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Thuja orientalis L., diffuse-porous wood Gmelina arborea Roxb., and ring-porous wood Phellodendron amurense Rupr., Longitudinal flow was considered from bottom to top while the radial flow was considered from bark to pith directions. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents(MC). The variation of penetration speed for different species was observed and the reasons behind for this variation were explored. The highest radial penetration depth was found in ray parenchyma of T. orientalis but the lowest one was found in ray parenchyma of P. amurense. The average liquid penetration depth in longitudinal trachied of T. orientalis was found the highest among all the other cells. The penetration depth in fiber of G. arborea was found the lowest among the other longitudinal cells. It was found that cell dimension and also meniscus angle of safranine solution with cell walls were the prime factors for the variation of liquid flow speed in wood. Vessel was found to facilitate prime role in longitudinal penetration for hardwood species. The penetration depth in vessel of G. arborea was found highest among all vessels. Anatomical features like ray parenchyma cell length and diameter, end-wall pits number were found also responsible fluid flow differences. Initially liquid penetration speed was high and the nit gradually decreased in an uneven rate. Liquid flow was captured via video and the penetration depths in those cells were measured. It was found that even in presence of abundant rays in hardwood species, penetration depth of liquid in radial direction of softwood species was found high. Herein the ray length, lumen area, end wall pit diameter determined the radial permeability. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Following a go-stop-go cycle, the penetration speed of a liquid decreased over time.

• 대한지리학회지
• /
• 제38권6호
• /
• pp.935-948
• /
• 2003

STATSGO 데이터베이스는 주단위의 토양 특성을 분석하는 데에 있어 효과적인 자료다. 본 연구에서는 GIS 기법을 이용하여 STATSGO로부터 8개 주요 토양 특성을 추출하였다: 함수력(available water capacity), 점토비율, 토양깊이, 사면경사. 지하수위까지의 깊이, 배수 특성, 토성, 투수도, 평균적인 NDVI로부터의 편차로 정의된 가뭄 정도(drought severity)에 대해 앞서 열거한 토양 특성이 미치는 영향을 캔자스 중서부 지역을 대상으로 분석하였다. 연구 결과에 따르면, 분석된 8개 변수 중 7개가 통계적으로 유의한 상관관계를 가진 것으로 나타났는데, 상관계수는 -0.89에서 0.85에 이르렀다. Moderate Resolution Imaging Spectroradiometer(MODIS)로부터 취득된 지표복사열(thermal emission) 자료는 평균 NDVI에 대한 편차로 표현되는 가뭄정도와 통계적으로 유의한 상관관계를 가졌으며, 식물생육기간에 걸친 가뭄지역의 공간적 변화를 잘 나타내었다. 토양수분의 결핍양이 많아질수록, 복사열 시그널 값도 높아지며, 공간적 분포로 볼 때. 상대적으로 건조한 캔자스 서부로부터 증가하여 시간에 따라 점차 그 분포도 변화하였다. 연구결과는 또한 가뭄의 진행단계에 따라 가뭄에 대한 각 토양 변수의 영향도 달라짐을 보여주었다.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.195-200
• /
• 2005

For the longevity of OLEDs, passivation of OLEDs is an important process step since organic materials used in OLEDs are very vulnerable to moisture. In this work, the passivation effect of the plasma polymerized para-xylene (PP$\rho$X) layers was studied. The PPpX layers deposited by PECVD were formed on top of the cathode with various plasma powers of 50 - 90 W. Passivation effect of PP$\rho$X was significantly dependent upon the deposition plasma power of the PP$\rho$X film. The lifetime of OLEDs with the 70 W deposited PP$\rho$X passivation layer was about 5 times longer than that of the control device.

• 한국의류산업학회지
• /
• 제21권2호
• /
• pp.203-208
• /
• 2019

This paper considers the moisture permeability and fashion in the upper fabrics of cotton fabric shoes woven into various tissues and properties measured to examine the use as upper fabrics. We measured the tissues of the manufactured upper fabric are 1/3 twill, $4{\times}4$ weft rib, Maya, Triple, Deformed twill design (DTD), Diamond tissues and tear strength, tensile strength, breaking elongation, stretching under load at 100N, stitch tear resistance, and fastness. In the case of $4{\times}4$ weft rib, the tear strength and tensile strength were excellent; however, the elongation and stitch tear resistance at 100N load were less than the standard value. DTD fabrics are characterized by physical properties in the warp direction that are superior to those in the weft direction; however, the tear strength and tensile strength in the weft direction are less than the standard value. The 1/3 twill fabrics showed high tensile strength value and stitch tear resistance value in the warp direction; however, toughness, the main property of the shoe upper, was below the standard value. Triple and diamond fabrics, which have a significant effect on the performance of the shoe upper fabric, also had less than the standard value of tear strength. Maya upper fabric for shoes has better properties than other upper fabrics except for the elongation at break, and the stitch tear resistance has a value of 178% in the warp direction and 214% in the weft direction compared to the standard value. Therefore, the Maya fabric showed the possibility of being used as an upper textile for shoes.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.241-252
• /
• 2021

An experimental program was conducted to investigate the fresh properties, mechanical properties and durability characteristics of the self-compacting mortars (SCM) produced with pumice powder and Artificial Lightweight Fine Aggregate (aLWFA). aLWFA was produced by using fly ash. A total of 16 different mixtures were designed with a constant water-binder ratio of 0.37, in which natural sands were partially replaced with aLWFA and pumice powder at different volume fractions of 5%, 10% and 15%. The artificial lightweight aggregates used in this study were manufactured through cold bonding pelletisation of 90% of class-F fly ash and 10% of Portland cement in a tilted pan with an ambient temperature and moisture content. Flowability tests were conducted on the fresh mortar mixtures beforehand, to determine the self-compacting characteristics on the basis of EFNARC. To determine the conformity of the fresh mortar characteristics with the standards, mini-slump and mini-V-funnel tests were carried out. Hardened state tests were conducted after 7, 28 and 56 days to determine the flexural strength and axial compressive strength respectively. Durability, sorptivity, permeability and density tests were conducted at the end of 28 days of curing time. The test results showed that the pumice powder replacement improved both the fresh state and the hardened state characteristics of the mortar and the optimum mixture ratio was determined as 15%, considering other studies in the literature. In the aLWFA mixtures used, the mechanical and durability characteristics of the modified compositions were very close to the control mixture. It is concluded in this study that mixtures with pumice powder replacement eliminated the negative effects of the aLWFA in the mortars and made a positive contribution.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권3호
• /
• pp.59-65
• /
• 2024

본 연구에서는 아스팔트 혼합물의 역학적 특성 및 내구성을 향상시키기 위해 양이온 처리된 실리케이트 섬유를 활용한 개질재(CSM, Cationized Silicate Modifier)를 아스팔트에 적용하여 최적 혼입률 조건을 도출하였다. 개질 아스팔트 바인더를 활용한 아스팔트 혼합물의 배합설계를 실시하였으며, 최적 배합 조건을 대상으로 수분저항성 및 동적안정도의 내구성을 평가하였다. 평가결과 관련 지침에서 규정하고 있는 기준을 상회하는 것으로 나타났으며, 최적 배합비를 대상으로 투수시험을 실시한 결과 비배수성능을 확보하는 것으로 확인되었다. 현장 시험시공을 통해 소음저감 성능을 검토한 결과 포장 전 대비 약 10 dB의 소음 저감 성능을 확보하였으며, 추후 지속적인 소음 발생도 평가를 통해 신뢰성을 확보할 필요가 있을 것으로 판단된다.