• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.333-336
• /
• 2008

This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for each diameter of surface dead fuels in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on the ranges which are less than 0.6cm, 0.6-3.0cm, 3.0-6.0cm, and more than 6.0cm in the forest for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days for surface deads fuels which diameter are less than 3.0cm and the convergence was made more than six days for ones which diameters are more than 3.0cm except the surface dead fuel of 3.0-6.0cm diameter of loose forest density.

• Water Engineering Research
• /
• 제1권3호
• /
• pp.209-222
• /
• 2000

A spectral formalism was applied to quantify the sampling errors due to spatial and/or temporal gaps in soil moisture measurements. The lack of temporal measurements of the two-dimensional soil moisture field makes it difficult to compute the spectra directly from observed records. Therefore, the space-time soil moisture spectra derived by stochastic models of rainfall and soil moisture was used in their record. Parameters for both models were tuned with Southern Great Plains Hydrology Experiment(SGP'97) data and the Oklahoma Mesonet data. The structure of soil moisture data is discrete in space and time. A design filter was developed to compute the sampling errors for discrete measurements in space and time. This filter has the advantage in its general form applicable for all kinds of sampling designs. Sampling errors of the soil moisture estimation during the SGP'97 Hydrology Experiment period were estimated. The sampling errors for various sampling designs such as satedlite over pass and point measurement ground probe were estimated under the climate condition between June and August 1997 and soil properties of the SGP'97 experimental area. The ground truth design was evaluated to 25km and 50km spatial gap and the temporal gap from zero to 5 days.

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.571-581
• /
• 2015

Soil moisture content is generally accepted as an important factor to understand the process of crop growth and is the basis of earth system models for analysis and prediction of the crop condition. To continuously monitor soil moisture changes at kilometer scale, it is demanded to create high resolution data from the current, several tens of kilometers. In this paper we described a downscaling method for Advanced Microwave Scanning Radiometer 2 (AMSR2) Soil Moisture Content (SMC) from 10 km to 30 m resolution using a soil texture and field measurements that have a high correlation with the SMC. As a result, the soil moisture variations of both data (before and after downscaling) were identical, and the Root Mean Square Error (RMSE) of SMC exhibited the low values. Also, time series analyses showed that three kinds of SMC data (field measurement, original AMSR2, and downscaled AMSR2) had very similar temporal variations. Our method can be applied to downscaling of other soil variables and can contribute to monitoring small-scale changes of soil moisture by providing high resolution data.

• 마이크로전자및패키징학회지
• /
• 제29권3호
• /
• pp.37-42
• /
• 2022

최근 반도체 패키지 구조는 점점 더 얇아지고 복잡해지고 있다. 두께가 얇아짐에 이종 계면에서 물성차이에 의한 박리는 심화될 수 있으며 따라서 계면의 신뢰성이 패키징 설계에 중요한 요소라 할 수 있다. 특히, 반도체 패키징에 많이 사용되는 폴리머는 온도와 수분에 영향을 크게 받기 때문에 환경에 따른 물성 변화 고려가 필수적이다. 따라서, 본 연구에서는 다양한 온도조건에서 수분의 흡습과 탈습을 모두 고려한 패키지 구조의 계면 박리 예측을 유한 요소 해석을 통해 수행하였다. 확산계수와 포화 수분 함량과 같은 재료의 물성은 흡습 실험을 통해 확보하였으며, 흡습 이후 TMA 와 TGA 를 통하여 각 재료의 수분 팽창 계수를 확보하였다. 각 계면의 접합 강도 평가를 위해 수분의 영향을 고려하여 다양한 온도 조건에서 마이크로 전단 실험을 수행하였다. 이러한 물성을 바탕으로 온도와 수분에 의해 발생하는 변형을 모두 고려한 패키지 박리 예측 해석을 수행하였으며, 결과적으로 리플로우 공정 동안의 실시간 수분 탈습 거동을 고려한 계면 박리 예측을 성공적으로 수행하였다.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.755-761
• /
• 2010

This study analyzed water quality data from a coniferous forest catchment in order to quantify the contributions of runoff components to stormflow, and to understand the effects of antecedent moisture conditions within catchment on the contributions of runoff components. Hydrograph separation by the twocomponent mixing model analysis was used to partition stormflow discharge into pre-event and event components for total 10 events in 2005 and 2008. To simplify the analysis, this study used single geochemical tracer with Na+. The result shows that the average contributions of event water and pre-event water were 34.8% and 65.2% of total stormflow of all 10 events, respectively. The event water contributions for each event varied from 18.8% to 47.9%. As the results of correlation analysis between event water contributions versus some storm event characteristics, 10 day antecedent rainfall and 1 day antecedent streamflow are significantly correlated with event water contributions. These results can provide insight which will contribute to understand the importance of antecedent moisture conditions in the generation of event water, and be used basic information to stormflow generation process in forest catchment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.174-177
• /
• 2004

Differential interferometric phases from JERS-1 L­band data sets show spatial variation of path-length ranging from a few mm to several cm. The variation may be caused by changes in soil moisture contents, i.e. variation of penetration depth and the swelling of soils. Although the amount of total effect caused by soil moisture is not measurable, it is clear that the soil moisture according to precipitation is another factor to be considered in DInSAR analysis. We also discuss DInSAR characteristics in a rice paddy according to irrigation conditions, and discrimination of hydrological features such as stream channels and watershed boundaries by applying DInSAR technique.

• Architectural research
• /
• 제14권4호
• /
• pp.153-161
• /
• 2012

This paper presents an integrated procedure to predict the temperature and moisture distributions in hardening concrete considering the effects of temperature and aging. The degree of hydration is employed as a fundamental parameter to evaluate hydro-thermal-mechanical properties of hardening concrete. The temperature history and temperature distribution in hardening concrete is evaluated by combining cement hydration model with three-dimensional finite element thermal analysis. On the other hand, the influences of both self-desiccation and moisture diffusion on variation of relative humidity are considered. The self-desiccation is evaluated by using a semi-empirical expression with desorption isotherm and degree of hydration. The moisture diffusivity is expressed as a function of degree of hydration and current relative humidity. The proposed procedure is verified with experimental results and can be used to evaluate the early-age crack of hardening concrete.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.204-207
• /
• 2008

The purpose of this study is to identify how much the MODIS NDVI (Normalized Difference Vegetation Index) can explain the soil moisture simulated from SWAT (Soil and Water Assessment Tool) continuous hydrological model. For the application, ChungjuDam watershed (6,661.3 $km^2$) was adopted which covers land uses of 82.2 % forest, 10.3 % paddy field, and 1.8 % upland crop respectively. For the preparation of spatial soil moisture distribution, the SWAT model was calibrated and verified at two locations (watershed outlet and Yeongwol water level gauging station) of the watershed using daily streamflow data of 7 years (2000-2006). The average Nash and Sutcliffe model efficiencies for the verification at two locations were 0.83 and 0.91 respectively. The 16 days spatial correlation between MODIS NDVI and SWAT soil moisture were evaluated especially during the NDVI increasing periods for forest areas.

• 한국농공학회지
• /
• 제40권6호
• /
• pp.79-88
• /
• 1998

This study was conducted to measure the moisture content of soil using RF impedance in the range of 1 to 30MHz. Considering the water potential flow in the soils, two types of sensor such as parallel cylinder and perpendicular plate type were fabricated and tested. The capacitance and resistance of sonsors for soil samples having moisture content range of 2 to 27% were measured by Q-meter (HP4342). The higher soil moisture content was and the larger soil bulk density was, the more the capacitance of sensors increased. To eliminate the effect of bulk density on measuring soil moisture content using RF impedance, two kinds of model having the density independent functions such as the ratio of capacitance change to conductance change and weight of water and dry soils respectively were developed and estimated by regression analysis.

• 한국식품과학회지
• /
• 제25권4호
• /
• pp.400-403
• /
• 1993

Corn starch와 waxy corn starch를 시료전분으로 사용하여 수분함량 $20{\sim}80%$ 범위에서 DSC를 사용하여 얻은 흡열곡선의 엔탈피와 효소분석법으로 전분의 호화도를 측정하여, 측정방법들 사이의 차이를 비교하여 보았다. DSC로 시료전분의 엔탈피 측정시 수분함량 70%까지는 수분함량 증가에 따라 엔탈피가 비례적으로 증가하였으나 70% 이상의 수분함량에서는 엔탈피가 평형에 도달하였으며 waxy corn starch가 4.2 cal/g, corn starch가 3.23cal/g의 엔탈피를 나타내었다. 효소분석법으로 호화도를 측정하였을 때는 수분함량의 증가에 따라 80% 수분함량까지도 시료전분의 호화도가 비례적으로 증가하였다. DSC에 의한 엔탈피 변화와 효소분석법에 의한 호화도 결과를 비교하여 보면 수분함량 70% 이하에서는 서로 직선적인 비례관계를 나타내었으나, 수분함량 70% 이상의 고 수분계 전분은 DSC로 측정시 엔탈피 차이가 나지 않았으나 효소분석법으로 측정했을 때는 수분함량 80%까지도 호화도 차이가 잘 나타났다.