• 한국광학회지
• /
• 제27권2호
• /
• pp.67-72
• /
• 2016

영사식 무아레 토포그래피에서 실제 물체에 대한 측정오차를 줄이기 위해서는 물체높이에 따른 무늬차수의 변화율인 무늬 민감도에 대한 조사가 필수적이며, 또한 무늬 민감도를 활용을 하면 절대 차수 결정이 매우 편리하고 정확해진다. 영사기를 사용한 영사식 무아레 토포그래피에서 무늬차수를 결정하기 위한 변수는 광원의 위치와 물체의 위치, 격자주기이다. 이 변수들 중에서 광원의 위치를 횡축으로 움직이는 광원 횡축 이동법과 물체를 종축으로 움직인 물체 종축 이동법에 따른 무늬 민감도를 격자주기에 따라 서로 비교하고 이를 분석하였다. 그 결과 광원 횡축 이동법에서 광원과 상검출기 사이의 간격이 클수록 민감도가 높았으나, 물체 종축 이동법에서 물체와 결상렌즈 사이의 거리가 작을수록 민감도가 높았다. 그리고 두 방법에서 격자주기가 작을수록 민감도가 더 높았으며 변수 변화에 따른 무늬 민감도 변화량은 더 컸다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 추계학술발표 논문집
• /
• pp.111-115
• /
• 1998

A phase-shifting projection moire method particularly intended for high-speed three-dimensional shape reconstruction of diffuse objects is presented. Emphasis is on realization of phase-shifting fringe analysis in projection moire topography using a set of line grating pairs designed to provide different phase shifts in sequence. Further a time-integral fringe capturing scheme is devised to remove undesirable high frequency original grating patterns in real-time without time-consuming software image processing. Finally the performances of the proposed method are discussed with measurement results.

• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.25-31
• /
• 2000

"모아레(MOIRE)"란 말은 처음으로 프랑스인들에 의해 불려진 단어로써 고대 중국에서 수입된 비단 위에 새겨진 물결무늬(wave pattern)를 일컫는 말이다. 이렇게 불리어지던 모아레는 요즈음에 들어서서 두 개 이상의 주기적인 패턴(periodic pattern)이 겹쳐질 때 만들어지는 간섭무늬 (interference fringe)를 지칭하는 말로써 다양한 분야에서 매우 광범위하게 사용되어 지고 있다.(중략)

• 대한한의학회지
• /
• 제21권4호
• /
• pp.148-158
• /
• 2000

Objective : The purpose of this study was to investigate the back shape of school children using the phase-shifting scanning grating projection moire interferometer, which was developed by the Korea Advanced Institute of Science and Technology and is useful in evaluating three dimensional back shape. Methods : In this study the subjects consisted of 1,358 pupils [711 boys(52.36%), 647 girls(47.64%)] attending elementary and middle schools in Seoul. Their ages ranged from nine to fifteen and the average age was 12.2. With the phase-shifting scanning grating projection moire interferometer, the posterior view of the body were taken to see if there are correlations of moire fringe number, width difference between left and right, and correlation between differences in moire fringe number and width on both sides in the scapular, lumbar and gluteal regions. Results : The results were as follows : I. More frequent findings of fringe were observed on the right in all regions : in the scapular region, 309 boys(43.4%) and 156 girls(24.2%) had more fringe numbers on the right side; in the lumbar region, 68 boys(9.5%) and 11 girls(1.7%); and in the gluteal region, 160 boys(22.4%) and 63 girls(9.8%). Such tendency was striking especially in the scapular and lumbar regions, and in boys rather than in girls. In the scapula, 661 subjects(48.7%) with one moire fringe on either side need further attention and 110 subjects(8.I %) with two or more are required to do follow-up radiography for scoliosis. 2. In an analysis of width difference in the trunk, the left side is wider in all regions except for the gluteal region in boys : in the scapular region 21 boys(3.0%) and 103 girls(15.9%); in the lumbar region, 87 boys(12.2%) and 250 girls(38.6%); and in the gluteal region 197 girls(30.4%) had a wider left side and 45 boys(6.3%) showed a wider right side. 3. In correlation analysis of the number of moire fringe and width difference in each region, the side where more moire fringes were observed was significantly wider in the lumbar and gluteal regions, but not in the scapular region.(p<0.01) Conclusions : From these results, it is concluded that the back shape of elementary and middle school students in Seoul shows that the right side had more moire fringes; the left side was wider; and especially in the lumbar and gluteal regions the side where more moire fringes were observed was wider.

• 한국광학회지
• /
• 제19권4호
• /
• pp.302-309
• /
• 2008

컴퓨터 전산모의와 회전자를 이용한 실험을 통하여 회전변위에 따른 반복사인격자 한 쌍이 만드는 무아레 무늬의 변화를 세밀하게 조사하여 반복사인격자가 겹쳐서 동시에 생기는 두 가지의 서로 다른 무아레 무늬를 사용하는 작은 회전변위를 측정하는 가시적 방법을 보여준다. 이 무아레 무늬는12도 이상의 큰 각도 측정에 유용한 장주기의 넓고 긴 직선무늬와 12도 이하의 작은 각도 측정에 유리한 좁고 짧은 복잡한 직선무늬로 이루어져 있다. 그리고 무아레 무늬의 회전방향에 따라 회전변위의 회전방향도 동시에 가시적으로 판별할 수 있다.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.16-24
• /
• 1992

Moire interferometry using a diffraction grating and a laser is a powerful technique for analizing small deformation of a specimen. In the method, the x and y-directional fringe patterns are obtained by using the x and y-directional sets of two beams. If the both sets of two beams are simultaneously incident to the specimen, the x and y-directional fringe patterns are super imposed. In this case, it is difficult to separate each directional fringe pattern. Therefore each fringe pattern has been separately recorded by selecting each set of two beams. In order to analyze a two-dimensional strain changing with time, Moire interferometry using the two-dimensional fourier transform method is proposed and the x and y-directional fringes are separated. By this method, the thermal deformation of a glass plate is analyzed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• 센서학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.