• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.67-72
• /
• 2016

In projection moire topography, the investigation of fringe sensitivity, which means the change rate of fringe order according to object height, is important and necessary to reduce the measurement error of the shape of an object. Using the fringe sensitivity, the determination of the absolute orders of moire fringes can be performed very easily and rapidly. The important parameters in the determination of absolute orders of fringes are the positions of light source and object, and the grating period in projection moire topography. Among these parameters, the fringe sensitivity due to the transverse motion of the light source and the longitudinal motion of the object according to grating periods are analyzed and compared. As a result, whereas the fringe sensitivity in the transverse-motion method increases linearly and gradually as the distance between light source and imaging sensor increases, the fringe sensitivity due to the longitudinal-motion method decreases dramatically as the distance between imaging lens and object increases. In these methods, the fringe sensitivity and its change increase as the grating period increases.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.111-115
• /
• 1998

A phase-shifting projection moire method particularly intended for high-speed three-dimensional shape reconstruction of diffuse objects is presented. Emphasis is on realization of phase-shifting fringe analysis in projection moire topography using a set of line grating pairs designed to provide different phase shifts in sequence. Further a time-integral fringe capturing scheme is devised to remove undesirable high frequency original grating patterns in real-time without time-consuming software image processing. Finally the performances of the proposed method are discussed with measurement results.

• Korean Journal of Oriental Medicine
• /
• v.1 no.1
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.25-31
• /
• 2000

"모아레(MOIRE)"란 말은 처음으로 프랑스인들에 의해 불려진 단어로써 고대 중국에서 수입된 비단 위에 새겨진 물결무늬(wave pattern)를 일컫는 말이다. 이렇게 불리어지던 모아레는 요즈음에 들어서서 두 개 이상의 주기적인 패턴(periodic pattern)이 겹쳐질 때 만들어지는 간섭무늬 (interference fringe)를 지칭하는 말로써 다양한 분야에서 매우 광범위하게 사용되어 지고 있다.(중략)

• The Journal of Korean Medicine
• /
• v.21 no.4
• /
• pp.148-158
• /
• 2000

Objective : The purpose of this study was to investigate the back shape of school children using the phase-shifting scanning grating projection moire interferometer, which was developed by the Korea Advanced Institute of Science and Technology and is useful in evaluating three dimensional back shape. Methods : In this study the subjects consisted of 1,358 pupils [711 boys(52.36%), 647 girls(47.64%)] attending elementary and middle schools in Seoul. Their ages ranged from nine to fifteen and the average age was 12.2. With the phase-shifting scanning grating projection moire interferometer, the posterior view of the body were taken to see if there are correlations of moire fringe number, width difference between left and right, and correlation between differences in moire fringe number and width on both sides in the scapular, lumbar and gluteal regions. Results : The results were as follows : I. More frequent findings of fringe were observed on the right in all regions : in the scapular region, 309 boys(43.4%) and 156 girls(24.2%) had more fringe numbers on the right side; in the lumbar region, 68 boys(9.5%) and 11 girls(1.7%); and in the gluteal region, 160 boys(22.4%) and 63 girls(9.8%). Such tendency was striking especially in the scapular and lumbar regions, and in boys rather than in girls. In the scapula, 661 subjects(48.7%) with one moire fringe on either side need further attention and 110 subjects(8.I %) with two or more are required to do follow-up radiography for scoliosis. 2. In an analysis of width difference in the trunk, the left side is wider in all regions except for the gluteal region in boys : in the scapular region 21 boys(3.0%) and 103 girls(15.9%); in the lumbar region, 87 boys(12.2%) and 250 girls(38.6%); and in the gluteal region 197 girls(30.4%) had a wider left side and 45 boys(6.3%) showed a wider right side. 3. In correlation analysis of the number of moire fringe and width difference in each region, the side where more moire fringes were observed was significantly wider in the lumbar and gluteal regions, but not in the scapular region.(p<0.01) Conclusions : From these results, it is concluded that the back shape of elementary and middle school students in Seoul shows that the right side had more moire fringes; the left side was wider; and especially in the lumbar and gluteal regions the side where more moire fringes were observed was wider.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2008

We present the precise visual measurement method of rotational displacements using two different moire fringes simultaneously generated by repeated sinusoidal gratings. We investigate the variation of moire fringes depending on rotational displacements through computer simulation and experiment using a rotator in detail. The moire fringes are composed of the wide linear fringe part with a long period and the narrow linear fringe part with a short period. These parts are superior to the angle detection of more than 12 degrees and less than 12 degree, respectively. Additionally, the method can be visually used in the determination of the rotational direction by observing the moire fringe's direction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.1
• /
• pp.16-24
• /
• 1992

Moire interferometry using a diffraction grating and a laser is a powerful technique for analizing small deformation of a specimen. In the method, the x and y-directional fringe patterns are obtained by using the x and y-directional sets of two beams. If the both sets of two beams are simultaneously incident to the specimen, the x and y-directional fringe patterns are super imposed. In this case, it is difficult to separate each directional fringe pattern. Therefore each fringe pattern has been separately recorded by selecting each set of two beams. In order to analyze a two-dimensional strain changing with time, Moire interferometry using the two-dimensional fourier transform method is proposed and the x and y-directional fringes are separated. By this method, the thermal deformation of a glass plate is analyzed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.320-325
• /
• 1999

An absolute type shaft encoder which utilized moire fringe will be presented in this paper. Linear moire fringe is commonly used to measure the displacement of the linear motion. However, an absolute encoder which measure the rotation angle of a shaft is operated usually with a code disk which the gray code pattern is printed on. Such encoder has inherently resolution limit because of the patterning mechanism and sensing mechanism. In order to measure the position of fringes which move as the code disk rotates, neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software, which needs a little long calculation time. However, using neural network method can eliminate such calculation time, even though it needs learning job. The proposed method is verified through several experiments.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.