• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.95-95
• /
• 2017

Lodging is a serious issue in rice production, because it drastically decreases the biomass production and grain yield. Since the Green Revolution, the lodging resistance has been increased by lowering the moment of above-ground parts due to the short culm by the semi-dwarf gene sd1. However, it has been pointed out that sd1 alone has suppressive effects for biomass production and yield. To increase rice yield, the long-culm and large panicle type varieties with a superior lodging resistance need to be developed. To improve the lodging resistance and yield of these type varieties, it would be effective to identify novel alleles for these traits underlying natural variations in rice and to pyramid these alleles to a single rice variety. In order to perform this strategy, we have developed new rice lines derived from crosses among varieties with superior alleles. At first, TULT-gh-5-5 was selected from a cross between strong culm and high biomass variety Leaf Star and high-yielding variety Takanari, and TUAT-32HB was selected from a cross between high-yielding variety Akenohoshi and Takanari. Then, we developed the super thick-culm and super grain-bearing line, LTAT-29 derived from a cross between TULT-gh-5-5 and TUAT-32HB. In the current study, to identify the QTLs and genes relating to the strong culm and the high yield of LTAT-29, we performed QTL analysis using SNPs markers with $F_2$ population derived from a cross between LTAT-29 and Takanari. LTAT-29 has never lodged throughout the growth period despite it had long culms and heavy panicles. LTAT-29 had a larger outer diameter of the culm and twice the size of the section modulus than Takanari. As a result, the bending moment at breaking of LTAT-29 was significantly larger than that of Takanari. Brown rice yield of LTAT-29 was $9.2t\;ha^{-1}$ about 10% higher than that of Takanari due to the larger number of spikelets per panicle. LTAT-29 had a greater number of secondary branches per panicle. In the $F_2$ population between LTAT-29 and Takanari, we found continuous frequency distributions in the section modulus and the spikelet number per panicle. Two QTLs increased the section modulus by the alleles of LTAT-29 were detected on Chr.1L and Chr.2L. One QTL increased the spikelet number per panicle of Takanari by the allele of LTAT-29 was detected on Chr.1L, and two QTLs increased the number of secondary branches per panicle by the alleles of LTAT-29 were detected on Chr.1L and Chr.4L. It was found that the alleles of these QTLs were the japonica type originated from Leaf Star or Akenohoshi. The novel QTLs for the traits related to super thick-culm and super grain-bearing and their combinations could be utilized for improving the lodging resistance and yield in rice varieties.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.57-62
• /
• 2016

PURPOSES : The objective of this study is to evaluate the effect of size and depth of cavities on the pavement failure using the full-scale accelerated pavement testing. METHODS : A full-scale testbed was constructed by installing the artificial cavities at a depth of 0.3 m and 0.7 m from the pavement surface for accelerated pavement testing. The cavities were made of ice with a dimension of 0.5 m*0.5m*0.3m, and the thickness of asphalt and base layer were 0.2 m and 0.3 m, respectively. The ground penetrating radar and endoscope testing were conducted to determine the shape and location of cavities. The falling weight deflectometer testing was also performed on the cavity and intact sections to estimate the difference of structural capacity between the two sections. A wheel loading of 80 kN was applied on the pavement section with a speed of 10 km/h in accelerated pavement testing. The permanent deformation was measured periodically at a given number of repetitions. The correlation between the depth and size of cavities and pavement failure was investigated using the accelerated pavement testing results. RESULTS : It is found from FWD testing that the center deflection of cavity section is 10% greater than that of the intact section, indicating the 25% reduction of modulus in subbase layer due to the occurrence of the cavity. The measured permanent deformation of the intact section is approximately 10 mm at 90,000 load repetitions. However, for a cavity section of 0.7 m depth, a permanent deformation of 30 mm was measured at 90,000 load repetitions, which is three times greater than that of the intact section. At cavity section of 0.3 m, the permanent deformation reached up to approximately 90 mm and an elliptical hole occurred at pavement surface after testing. CONCLUSIONS : This study is aimed at determining the pavement failure mechanism due to the occurrence of cavities under the pavement using accelerated pavement testing. In the future, the accelerated pavement testing will be conducted at a pavement section with different depths and sizes of cavities. Test results will be utilized to establish the criteria of risk in road collapse based on the various conditions.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.863-874
• /
• 2015

본 연구에서는 보강날개로 보강된 수중잠제 지지말뚝의 보강효과를 분석하기 위하여 하중전이거동을 분석하였다. 먼저 3차원 유한요소해석을 통해 말뚝의 변위 및 하중전이곡선(지반반력) 결과로부터 보강효과를 확인하고, 하중전이곡선에서 극한저항력 비율로 보강말뚝의 수평 및 인발하중에 대한 보강계수를 산정함으로써 보강효과를 정량화 하였다. 산정된 보강계수를 쌍곡선 하중전이함수의 극한저항력 $p_u$와 $t_{max}$에 곱해서 보정상수(fitting parameter)로 적용하여 보강효과를 고려한 하중전이함수를 제안하였다. 제안된 하중전이함수가 수치해석 결과를 잘 반영하고 있는지 확인하기 위해 3차원 유한요소해석을 비교하여 보강말뚝의 하중전이거동을 분석하였다. 제안된 하중전이함수를 하중전이법 해석에 적용하여, 실제 수중잠제를 해석한 결과 보강말뚝의 전단력, 휨 모멘트, 변위가 무보강말뚝보다 작게 발생하고, 지반반력은 더 크게 발생하여 비교적 경제적인 설계가 가능할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.333-352
• /
• 2017

A comparison study is made between the dynamic properties of an argillaceous siltstone and its grouting-reinforced body. The purpose is to investigate how grout injection can help repair broken soft rocks. A slightly weathered argillaceous siltstone is selected, and part of the siltstone is mechanically crushed and cemented with Portland cement to simulate the grouting-reinforced body. Core specimens with the size of $50mm{\times}38mm$ are prepared from the original rock and the grouting-reinforced body. Impact tests on these samples are then carried out using a Split Hopkinson Pressure Bar (SHPB) apparatus. Failure patterns are analyzed and geotechnical parameters of the specimens are estimated. Based on the experimental results, for the grouting-reinforced body, its shock resistance is poorer than that of the original rock, and most cracks happen in the cementation boundaries between the cement mortar and the original rock particles. It was observed that the grouting-reinforced body ends up with more fragmented residues, most of them have larger fractal dimensions, and its dynamic strength is generally lower. The mass ratio of broken rocks to cement has a significant effect on its dynamic properties and there is an optimal ratio that the maximum dynamic peak strength can be achieved. The dynamic strain-softening behavior of the grouting-reinforced body is more significant compared with that of the original rock. Both the time dependent damage model and the modified overstress damage model are equally applicable to the original rock, but the former performs much better compared with the latter for the grouting-reinforced body. In addition, it was also shown that water content and impact velocity both have significant effect on dynamic properties of the original rock and its grouting-reinforced body. Higher water content leads to more small broken rock pieces, larger fractal dimensions, lower dynamic peak strength and smaller elastic modulus. However, the water content plays a minor role in fractal dimensions when the impact velocity is beyond a certain value. Higher impact loading rate leads to higher degree of fragmentation and larger fractal dimensions both in argillaceous siltstone and its grouting-reinforced body. These results provide a sound basis for the quantitative evaluation on how cement grouting can contribute to the repair of broken soft rocks.

• 한국지반환경공학회 논문집
• /
• 제13권6호
• /
• pp.19-26
• /
• 2012

본 연구에서는 산업부산물 중 고로슬래그를 기본 재료로 바이패스 더스트(Bypass dust), 플라이애쉬와 인산석고를 자극제로 활용하고 원료들 간의 화학적 상호작용을 이용하여 개발된 지반 고화제의 개량효과를 판단하기 위하여 화강풍화토 및 준설된 해성점토에 다양한 혼합비로 혼합하여 기본 물성실험과 일축압축실험을 실시하였다. 화강풍화토와 혼합하여 실험한 결과, 인산석고를 자극제로 활용한 B-2고화제가 바이패스 더스트를 자극제로 활용한 B-1고화제에 비해 우수한 강도를 발현하였다. 화강풍화토에 5~7%의 무게비로 혼합된 B-1 및 B-2고화제는 일반 포트랜트 시멘트(OPC)에 비해 44%~60%의 강도를 발현시키나 원료가 산업부산물이므로 특별히 높은 강도를 요구하지 않는 지반구조물에 사용된다면 시멘트뿐 아니라 현재 국내에서 판매되는 고화제에 비해 경제적인 것으로 판단된다. 또한 해성준설토에 5~14%로 혼합하여 실험한 결과, 양생일 및 혼합비 증가에 따라 혼합토의 강도는 증가하며 B-1 고화제의 경우 양생일에 대해 선형적으로 증가하여 14% 혼합비에서 28일 양생일의 일축압축강도가 OPC혼합토에 비해 40%의 강도를 보이나 B-2는 양생일에 대해 비선형적으로 증가하여 OPC 혼합토 대비 133%로 매우 큰 강도를 발현하였다. 한편 B-1혼합토와 B-2혼합토의 변형계수는 $E_{50}=(20{\sim}47)_{qu,28}$ 범위인 것으로 나타나 OPC 혼합 준설토의 하한계 값에 가까운 것으로 나타났다.

• 한국가스학회지
• /
• 제27권4호
• /
• pp.19-26
• /
• 2023

지진은 지하 구조물에 영향을 미치는 가장 중요한 재해 중 하나이다. 도시가스 지하 매설 배관은 지진 발생 시 구조물의 안전성 문제가 발생할 수 있다. 우리나라는 디지털 관측을 시작한 이래로 지진 발생 횟수가 꾸준히 증가하고 있다. 도시가스배관의 내진 설계 기준은 2008년에 KGS GC204 가스배관 내진설계 기준이 제정되었지만 이는 배관 설치 시 기준으로 지진 발생 시 배관의 영향을 추정하기는 어렵다. 본 연구에서는 국내에서 매설배관으로 주로 사용하고 있는 PE(폴리에틸렌관)배관과 PLP(폴리에틸렌 피복강관) 배관을 대상으로 지진 발생 시 환경 및 배관의 변수에 따른 구조해석을 수행하였다. 본 연구는 CAE(Computer Aided Engineering)를 통해 배관을 모델링하고 지반에 변위를 발생시켜 가장 취약한 매설배관의 변수를 찾고자하였다. 이 연구를 통해 토양은 탄성계수가 클 수록, 매설심도는 깊을 수록, 관경은 작을 수록, 압력은 높을 수록, PE 보다 PLP 배관이 더 지진에 영향을 많이 받는 것을 확인할 수 있었다. 이 결과를 토대로 매설 도시가스배관의 취약지점을 유추하여 지진발생 시 매설배관의 특별점검에 활용하고자한다.[1]

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.85-92
• /
• 2011

말뚝의 동적 거동은 지반-말뚝의 동적상호작용, 지반의 비선형성, 지반-말뚝 시스템의 공진 현상 등 많은 요소가 상호 작용을 하므로 매우 복잡하다. 그러므로, 말뚝의 동적 거동을 수치해석으로 정확히 모사하려면 많은 노력과 시간이 필요하다. 본 연구에서는 기존의 범용 수치해석 프로그램인 FLAC 3D를 활용하면서도 해석시간을 크게 감소 시킬 수 있는 새로운 모델링 기법을 개발하였다. 본 기법은 전체 해석 영역을 근역 지반과 원역 지반으로 나누고 지반-말뚝 동적상호작용에 영향을 받지 않는 원역 지반을 요소망으로 모델링하는 대신 원역 지반의 지반 운동 시간이력을 근역 지반의 경계 조건에 입력 하중으로 적용하는 기법이다. 이 수치 모델링에서 지진파의 강도가 클 때 일어나는 지반의 비선형 거동을 모사하기 위하여 이력 감쇠 모델을 이용하여 접선 탄성 계수를 전단 변형률의 함수 값으로 입력하였으며, 지반과 말뚝 사이의 분리 현상을 모사하기 위하여 지반-말뚝 경계 요소를 도입하였다. 이 방법은 기존의 방법과 비교하여 해석 결과의 정확성을 유지하면서 해석 시간을 1/3로 감소시켰다. 제안된 수치해석 방법으로 예측한 1g 진동대 모형 실험의 원형 거동은 원형으로 환산한 모형 실험 결과와 유사하게 나타났다.

• 터널과지하공간
• /
• 제18권2호
• /
• pp.98-106
• /
• 2008

암질이 불량한 암반에 터널이 굴착되는 경우 터널의 주변 암반은 그라우팅, 록볼트 설치 등의 보강법을 활용하여 일정 깊이까지 보강이 이루어진다. 터널보강의 효과를 수치해석적으로 계산하기 위해서는 보강재를 직접 요소로 표현하거나 보강영역의 등가물성을 활용하는 방법이 적용될 수 있다. 이 연구에서는 후자의 목적에 이용될 수 있는 원형터널의 탄소성 해석을 위한 간단한 수치해석 기법을 개발하였다. 정수압조건의 초기응력이 작용하는 Mohr-Coulomb 암반에 굴착된 원형터널이 고리형태로 일정 깊이까지 보강된다면 보강대는 원 암반과 물성의 차이를 보인다고 가정할 수 있다. 보강대와 보강대를 제외한 가상의 터널에 대해 각각 Lee & Pietruszczak (2007)가 제안한 탄소성 해석법을 적용하고 적합조건을 만족하도록 두 영역의 해석결과를 연결시키는 방법으로 보강대 효과를 계산할 수 있는 탄소성 수치해석법을 개발하였다. 상업코드인 FLAC을 활용한 해석결과와 비교를 통하여 개발된 방법의 정확성을 검증하였다. 해석결과 보강대의 변형계수와 강도정수의 변화를 고려한 응력 및 변위 분포는 균질한 암반을 가정한 해석결과와 큰 차이를 보여주었다.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.128-136
• /
• 2014

화력발전소에서 발생되는 플라이애시는 콘크리트의 첨가재로 사용되는 것이 석탄회 재활용 방안 중 최선으로 알려져 있다. 이러한 석탄회는 최근 더 이상 매립이 불가능하여 콘크리트에 다량 첨가가 시도되고 있다. 그럼에도 불구하고 현재까지 하이볼륨 플라이애시(High Volume Fly Ash : HVFA) 시멘트 콘크리트의 연구분야는 주로 재료적인 분야에 대해서만 수행되어지고 있는 실정이다. 그러나 하이볼륨 플라이애시 시멘트 콘크리트의 구조재료로의 적용을 위해서는 탄성계수, 응력-변형률 관계 및 구조 부재 거동 등에 대한 연구가 필수적이다. 이를 위하여 본 논문에서는 플라이애시 치환율 0, 35 및 50%, 압축강도 20, 40 및 60MPa 그리고 인장철근비 2수준을 실험변수로 하여 플라이애시 시멘트 철근콘크리트 보 18개를 제작하여 이들의 휨거동을 실험적으로 평가하였다. 실험결과에 의하면 플라이애시를 첨가하지 않은 일반 콘크리트(FA=0%)와 35, 50% 플라이애시 시멘트 콘크리트 부재의 휨거동은 크게 차이나지 않음을 알 수 있었다. 또한 HVFAC의 휨거동을 평가하기 위하여 해석적 모델을 제안하였고, 컴퓨터 프로그램을 개발하여 실험결과와 해석결과를 비교한 결과, 거동 차이가 적어 제안된 해석 모델은 적절한 것으로 평가된다.

• 농업과학연구
• /
• 제14권1호
• /
• pp.98-133
• /
• 1987

The mechanical and rheological properties of agricultural materials are important for engineering design and analysis of their mechanical harvesting, handling, transporting and processing systems. Agricultural materials, which composed of structural members and fluids do not react in a purely elastic manner, and their response when subjected to stress and strain is a combination of elastic and viscous behavior so called viscoelastic behavior. Many researchers have conducted studies on the mechanical and rheological properties of the various agricultural products, but a few researcher has studied those properties of rice plant, and also those data are available only for foreign varieties of rice plant. This study are conducted to experimentally determine the mechanical and the rheological properties such as axial compressive strength, tensile strength, bending and shear strength, stress relaxation and creep behavior of rice stems, and grain detachment strength. The rheological models for the rice stem were developed from the test data. The shearing characteristics were examined at some different levels of portion, cross-sectional area, moisture content of rice stem and shearing angle. The results obtained from this study were summarized as follows 1. The mechanical properties of the stems of the J aponica types were greater than those of the Indica ${\times}$ Japonica hybrid in compression, tension, bendingand shearing. 2. The mean value of the compressive force was 80.5 N in the Japonica types and 55.5 N in the Indica ${\times}$ Japonica hybrid which was about 70 percent to that of the Japonica types, and then the value increased progressively at the lower portion of the stems generally. 3. The average tensile force was about 226.6 N in the Japonica types and 123.6 N in the Indica ${\times}$ Japonica hybrid which was about 55 percent to that of the Japonica types. 4. The bending moment was $0.19N{\cdot}m$ in the Japonica types and $0.13N{\cdot}m$ in the Indica ${\times}$ Japonica hybrid which was 68 percent to that of the Japonica types and the bending strength was 7.7 MPa in the Japonica types and 6.5 MPa in the Indica ${\times}$ Japonica hybrid respectively. 5. The shearing force was 141.1 N in Jinju, the Japonica type and 101.4 N in Taebaeg, the Indica ${\times}$ Japonica hybrid which was 72 percent to that of Jinju, and the shearing strength of Taebaeg was 63 percent to that of Jinju. 6. The shearing force and the shearing energy along the stem portion in Jinju increased progressively together at the lower portions, meanwhile in Taebaeg the shearing force showed the maximum value at the intermediate portion and the shearing energy was the greatest at the portion of 21 cm from the ground level, and also the shearing strength and the shearing energy per unit cross-sectional area of the stem were the greater values at the intermediate portion than at any other portions. 7. The shearing force and the shearing energy increased with increase of the cross-sectional area of the rice stem and with decrease of the shearing angie from $90^{\circ}$ to $50^{\circ}$. 8. The shearing forces showed the minimum values of 110 N at Jinju and of 60 N at Taebaeg, the shearing energy at the moisture content decreased about 15 percent point from initial moisture content showed value of 50 mJ in Jinju and of 30 mJ in Taebaeg, respectively. 9. The stress relaxation behavior could be described by the generalized Maxwell model and also the compression creep behavior by Burger's model, respectively in the rice stem. 10. With increase of loading rate, the stress relaxation intensity increased, meanwhile the relaxation time and residual stress decreased. 11. In the compression creep test, the logarithmic creep occured at the stress less than 2.0 MPa and the steady-state creep at the stress larger than 2.0 MPa. 12. The stress level had not a significant effect on the relaxation time, while the relaxation intensity and residual stress increased with increase of the stress level. 13. In the compression creep test of the rice stem, the instantaneous elastic modulus of Burger's model showed the range of 60 to 80 MPa and the viscosities of the free dashpot were very large numerical value which was well explained that the rice stem was viscoelastic material. 14. The tensile detachment forces were about 1.7 to 2.3 N in the Japonica types while about 1.0 to 1.3 N in Indica ${\times}$ Japonica hybrid corresponding to 58 percent of Japonica types, and the bending detachment forces were about 0.6 to 1.1 N corresponding to 30 to 50 percent of the tensile detachment forces, and the bending detachment of the Indica ${\times}$ Japonica hybrid was 0.1 to 0.3 N which was 7 to 21 percent of Japonica types. 15. The detachment force of the lower portion was little bigger than that of the upper portion in a penicle and was not significantly affected by the harvesting period from September 28 to October 20. 16. The tensile and bending detachment forces decreased with decrease of the moisture content from 23 to 13 percent (w.b.) by the natural drying, and the decreasing rate of detachment forces along the moisture content was the greater in the bending detachment force than the tensile detachment force.