• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.327-330
• /
• 2009

CH-6를 이용한 격벽 착화모듈을 설계하였다. 격벽 착화모듈은 도우너 화약에 의해 발생한 충격파가 격벽을 통해 도우너 화약에 전달되었을 때 동작한다. 격벽 착화모듈의 구조적 안전성은 구조해석을 통해 확인하였고 점화 성능은 10cc 밀폐용기 시험을 통하여 검증하였다. 동작시험 결과를 토대로 통계적처리방법인 Probit Method를 이용하여 신뢰도 분석을 하였다. 신뢰도 분석 결과를 통하여 격벽 착화모듈의 중요한 설계변수인 격벽두께를 결정하였다.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.243-247
• /
• 2014

본 논문은 수/배전반에 대한 오류 및 전기 화재를 일으키는 부분 방전을 측정하기 위한 두 가지 형태의 센서 모듈 설계하고 이들의 성능을 평가한다. 설계한 센서 모듈을 이용하여 상전류의 관계와 부분 방전 및 과열을 분석한다. 수/배전반의 고장이나 전기화재를 방지하기 위하여 정보를 분석 및 이용을 이용하여 안정성 지수를 활용하는 방법을 제안한다.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.113-121
• /
• 2000

A compact pre- and post-processor that runs on PC has been developed for the purpose of remote CAE. This includes a linear-finite-element-analysis module for on-site analysis of simple and midium-sized structural problems and an interfacing module for remote analysis of more complex cases such as nonlinear and large-scale linear problems which are cpu-consuming to solve. The software was designed to provide convenient interfacing capability for the use of client-server-type analysis. In this paper, the interface module was specially designed to use ABAQUS on the supercomputer. As a benchmark for the remote CAE, a sheet-forming simulation was perfomed on a PC networked with the supercomputer.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.358-363
• /
• 2007

This paper presents a floating point unit(FPU) with 3 stages for a 3D graphics shader engine. It targeted to accelerate 3D graphics in portable device environments. In order to design a balanced architecture for a shader engine, we analyzed shader assembly instructions and estimated the performance of FPU with the method we propose. The proposed unit handles 4-dimensional data through separated two paths that are lead to general operation module and special function module. The proposed FPU is compiled as a form of the cascade FPU with 3 stages to efficiently handle a matrix operation with relatively low hardware overhead. Except some complex instructions that are executed using macro instructions, all instructions complete an operation in a single instruction cycle at 100MHz frequency. A special function module performs all operations in a single clock cycle using the Newton Raphson method with the look-up table.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.158-162
• /
• 2002

This paper presents a novel 3-phase IGBT module called the SPM (Smart Power Module). This is a new design developed to provide a very compact, low cost, high performance and reliable motor drive system. Several distinct design concepts were used to achieve the highly integrated functionality in a new cost-effective small package. An overall description to the SPM is given and actual application issues such as electrical characteristics, circuit configurations, thermal performance and power ratings are discussed

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.105-112
• /
• 1990

The main concepts in the design and construction of an motorized wheelchair for loading in the tar which is intended to drive a disabled to long distance. The wheelchair is basically a powered and folding, so it is designed to motorized manual wheel- chair by modularity method. The wheelchair hrs been installed with a power motor module, battery module, and drive & control module. The goal of this project is to develop a wheelchair that has multifunction and operated disabled who has variety impairment. So we ave currently working. Experimental results of the system approach our purpose, which is improved maneuverability, safety and can be loaded.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.146-148
• /
• 2007

CMDPS (COMS Meteorological Data Processing System) is the operational meteorological products extraction system for data observed from COMS (Communication, Ocean and Meteorological Satellite) meteorological imager. CMDPS baseline products consist of 16 parameters including cloud information, water vapor products, surface information, environmental products and atmospheric motion vector. Additionally, CMDPS includes the function of calibration monitoring, and validation mechanism of the baseline products. The main objective of CMDPS validation module development is near-real time monitoring for the accuracy and reliability of the whole CMDPS products. Also, its long time validation statistics are used for upgrade of CMDPS such as algorithm parameter tuning and retrieval algorithm modification. This paper introduces the preliminary design on CMDPS validation module.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.31-35
• /
• 2018

The peltier thermoelectric module are used to cool the heat generated by electronic equipment. In order to increase the efficiency of the peltier thermoelectric module, the heat must be released to the outside. A heat sink is used to discharge such heat to the outside. in this paper, two types of heat sinks with internal tunnels were designed. And the heating and cooling performance of the heat sink with internal tunnel structure was compared and analyzed through ANSYS. The heat sink of the A type had better heat transfer than the heat sink of the B type. Which is about 70% improved.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 춘계학술대회
• /
• pp.63-65
• /
• 1990

The main concepts in the design and construction of an motorized wheelchair for loading in the car which is intended to drive a disabled to long distance. The wheelchair is basically a powered and folding, so it is designed to motorized manual wheelchair by modularity method. The wheelchair has been installed with a power motor module, battery module, and drive & control module. The goal of this project is to develop a wheelchair that has multifunction and operated disabled who has variety impairment. So we are currently working.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2556-2558
• /
• 2002

In this paper, the design guideline of communication interrace module for home-appliances is proposed. The requirements of the interface between white-goods and communication module are analyzed. Finally, the proposed interface structure is implemented using PLC technology.