• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1269-1276
• /
• 2014

The main objective of this paper is to design DC-DC MPPT circuit using chaotic pulse width modulation to track maximum power from solar PV module for space application. The direct control method of tracking is used to extract maximum power. The nominal duty cycle of the main switch of DC-DC SEPIC converter is adjusted so that the solar panel output impedance is equal to the input resistance of the SEPIC converter which results better spectral performance in the tracked voltages when compared to conventional PWM control. The conversion efficiency of the proposed MPPT system is increased when CPWM is used as a control scheme

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.100-112
• /
• 1996

This paper presents a design experience of a control language for coordination of a multi-robot system. To effectively program job commands, a Petrinet-type Graphical Robot Language(PGRL) is proposed, where some functions, such as concurrency and synchronization, for coordination among tasks can be easily programmed.In our system, the proposed task commands of PGRL are implemented by employing formal model languages, which are composed of three modules, sensory, data handling, and action module. It is expected that by using our proposed PGRL and formal languages, one can easily describe a job or task, and hence can effectively operate a complex real-time and concurrent system. The control system is being implemented by using VME-based 32-bit microprocessor boards for supervisory, each module controller(arm, hand, leg, sensor data processing module) and a real time multi-tasking operating system(VxWorks). (author). 17 refs., 16 figs., 2 tabs.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.145-150
• /
• 1997

A computer-aided process design system for axisymmetric deep drawing products has been developed. An approach to the system is based on the knowledge based system. The hypothesized process outline of the deep drawing operations is generated in the geometrical design module of the system. In this paper, the module has been expanded. The rules of process design sechems for complex cup drawings are formulated from handbooks, experimental results and empirical knowhow of the field experts. The input to the system is final sheet-metal objects geometry and the output from the system is process sequence with intermediate objects geometries and process parameters, such as drawing load, blank holding force, clearance and cup-drawing coefficient.

• 한국지열·수열에너지학회논문집
• /
• 제14권3호
• /
• pp.29-34
• /
• 2018

To present the design direction of the thermoelectric module (TEM) refrigerator, analysis of the effect of the design parameters on the energy efficiency and performance of the refrigerator is performed. The design parameters considered are the cooling capacity of the TEM and the heat transfer performance of the heating and cooling surface of the TEM. The heat transfer performance is the most effective design parameter for improving cooling power. The smaller ΔT and cooling capacity of the TEM make the higher efficiency of the refrigerator.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.160-161
• /
• 2014

This paper describes the classification problems of the unit modular housing through reviewing design drawings. Modular construction is a new industrialized homebuilding technology that uses large, factory produced modules. In general, more than 70% of construction processes in unit modular construction method are produced in factory after that the modular, which is completed is lifted on site and assembled. This research considers categorization in which the design drawing of the unit module housing can have problems. There are 17 types of construction method and 14 types of design approach as a result of the classification.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.504-507
• /
• 2011

3D graphic softwares have brought design spaces beyond the limitations of Euclidean space. Moreover, as computational geometry has been considered together with algorithms, generative algorithms are being evolved. Recently 3D graphic softwares with the embedded generative algorithms allow designers to design free form curves and surfaces in a systematic way. While architectural design has been greatly affected by the advancement of 3D graphic technology, such attention has not given in the realm of structural design. Grasshopper is a platform in Rhino to deal with these Generative Algorithms and Associative modelling techniques. This study has tried to develop a module for preliminary structural configuration using Rhino with Grasshopper. To verify the proposed concept in this study, a module for designing a basic type of suspension structure is introduced.

• 한국태양에너지학회 논문집
• /
• 제38권6호
• /
• pp.51-63
• /
• 2018

Nowadays the bifacial PV system market and its applications are increasing rapidly. The performance of the bifacial PV system take advantage of its rear surface irradiance. Also, the ground albedo, PV module tilt and azimuth, PV module installation height, shading effect and module temperature are factors of bifacial PV system performance. This paper investigates how the performance of bifacial PV system is influenced by above factors. First, we analyzed the energy yield depending on PV module installation by simulation. Secondly, we compare energy performance evaluation of monofacial and bifacial module on different weather condition by experiment. Thirdly, we tested the albedo effect and checked operating characteristics using Dupont Tyvek material for the bifacial PV module. Fourthly, we check the shading effect of bifacial PV module on bypass diode operating. Finally, we applied the bifacial PV module in the nearby subway station for the noise reduction barrier using a qualified simulation program. In summary, we confirm that the energy performance superiority of the bifacial PV module has a lot of application use including road. Also, we have confirmed the bifacial module and inverter design should be considered by rear surface irradiance.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.77-88
• /
• 2007

Axiomatic Design has been developed as a general design framework during past two decades and TRIZ has been developed for a design tool over 50 years. Axiomatic design is quite excellent in that design should be decoupled. When a design matrix is established, the characteristics of the design are identified according to the coupling properties. If the design is coupled, a decoupling process should be found. However, axiomatic design does not specifically indicate how to decouple a coupled design. In this research, the coupling manner is classified into six patterns. Each pattern could be solved by an appropriate TRIZ module. A table, which matches the coupling pattern and a TRIZ module, is proposed for effective application of the two design theories. The decoupling ideas are proposed by using TRIZ modules. When the number of decoupled designs is more than one, the engineer should select the final idea. The proposed method is applied to practical cases such as a tape feeder and a beam adjuster of the laser marker.

• 공학교육연구
• /
• 제2권1호
• /
• pp.10-16
• /
• 1999

본 논문에서는 인터넷을 이용한 디지탈 논리회로 설계 및 모의실험실습을 위한 교육용 소프트웨어 패키지(DVLab)를 개발하였다. 개발된 패키지는 디지탈 조합/순차회로는 물론 마이크로콘트롤러 응용회로까지 설계하고 시뮬레이션할 수 있는 모듈, 브레드보드 시뮬레이터 모듈, 실험항목별 이론 강의를 위한 모듈, 보고서 작성 및 보고서 자동검사 모듈 등을 포함하고 있다. 개발된 모든 모듈들은 독립적인 응용 프로그램으로 뿐만 아니라 인터넷을 이용한 사용이 가능하며, 특히 시뮬레이터 모듈의 경우 실시간 클럭 제공, 설계회로도 상에서 직접 소자의 출력값 확인, 논리값 변화 기록 기능, 설계회로 복사 방지 기능, 다양한 논리회로 소자뿐만 아니라 LED, buzzer등과 같은 시각적, 청각적 소자 제공 등의 특징을 가진다. 또한 개발된 교육용 패키지를 이용한 디지탈 논리회로 실험실습 과목의 학습 모형을 제시하였다.

• 건축역사연구
• /
• 제17권4호
• /
• pp.97-112
• /
• 2008

In this study, I attempted to the architectural design characteristics of Daeung-Jeon in Sudeok Temple. For this purpose, After I set up several assumptions in the basis of the general characteristics of Korean wood architecture, and then, analyzed floor plan, structural formation and section sizes of structure and bracket members in relation to module and unit. As the results, the characteristics of the design process of plan and structure are follows. (1) 1 ja(尺), the unit applied to this building is measured $307.6{\sim}318.3mm$) and the average is 312.9mm (2) It is estimated that the floor plan designed on the basis of the top of columns. By the applied unit, every bay of the front side and the side is each designed by 15 ja and 8.5 ja. (3) The section is composed of piled members which have same section size. As basic module of section size called 'jae(재;材)', it is estimated at width 0.45 ja by height 0.75 ja. And as the secondary module, height between jae and is called 'gyoe(계;)' and it wes designed by three height size of 0.25 ja, 0.27 ja and 0.30 ja, (4) It is estimated that the section plan was designed by the order as follows. Firstly, the horizontal position of purlins wes decided on the basis of the intersection point of long and short rafters, and then the position and the section size of purlins and jangheyo(長舌) wes decided on the basis of the slope of roof and rafters. Secondly, going down from purlins, the members of structure composed of 'jae' and 'gyoe' was repeated. Lastly, for the purpose of linking the structure members located on the center line of adjacent purlins organically, the height of whaban(화반) was controlled.