• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.600-607
• /
• 2006

For the effective operation of manufacturing system, FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing) system are developed. In these systems, a machine tool is the target of integration in last 3 decades. In nowadays, the conventional concept of machine tools is changing to the autonomous manufacturing device based on knowledge-evolution through applying advanced information technology in which open architecture controller, high speed network and internet technology are contained. In this environment, a machine tool is not the target of integration but the subject of cooperation. In the future, a machine tool will be more improved in the form of a knowledge-evolution based device. In order to develop the knowledge-evolution based machine tools, this paper proposes the structure of knowledge evolution in M2M(Machine To Machine) and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design the dialogue agent module in M2M environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge-evolution based machine tools can be hereafter more easily implemented.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.99-105
• /
• 2011

This paper is about the design of 3-axis magnetic sensor module which detects parking and moving vehicle. For the sensor module, MR Sensor from Honeywell of which maximum measurement range is ${\pm}2$[G] is used. It also consisted of amplifier and sensor filter and fabricated $30{\times}50$[mm] PCB. Fabricated sensor module produced helmholtz coil of which the length is 1.2[m] of 3-axis to know the performance. It installed sensor module at the center and measured the detected magnetic field. In result, 3-axis were detected as 0.2~0.3[mG] and the drift of the fluctuation of magnetic field was stabilized at 0.03[mG] unit. For the performance evaluation of the vehicle detection, after the entry and parking of the vehicle, variation of magnetic field was measured as 0.323~0.695[G] which the average 0.5[G] of the earth magnetic field was the center and the range of variation was confirmed as 0.37[G]. Therefore, the designed magnetic sensor can be used as the vehicle detection sensor module.

• 한국가스학회지
• /
• 제2권4호
• /
• pp.1-6
• /
• 1998

중화학 플랜트의 고온고압 요소인 증기 발생기(steam generator)의 드럼, 헤더 및 헤더 스터브 설계에 응력해석에서 부터 도면자동작도, 제작용 서류 자동생성에 이르기까지의 제반설계과정을 체계적으로 연결시킨 설계정보 통합 관리로 단순 설계오류를 줄이고, 또한 설계변경에 대해 신속한 재설계가 가능한 효율적인 설계를 도모하기 위하여 "피로수명을 고려한 헤더스터브 형상설계 모듈", "TRD301을 기초로한 후육내압부 운전조건(기동/정지 조건) 및 수명평가 모듈", "헤더 및 드럼부 자동작도 모듈"을 개발하였다. 이에 따라 형상설계 모듈을 이용하여 설계된 스터브 형상을 토대로 수명평가 모듈로 수명을 평가한 후 상세설계 도면 및 관련 서류의 자동작도로 이어지는 일관된 종합설계 시스템을 구축하였다.

• Architectural research
• /
• 제4권1호
• /
• pp.1-6
• /
• 2002

Every year new tall buildings are being conceived, designed, and built with new schemes. Thus it is important to explore the factors that affect tall building design. Thus it is important to explore the tall building design factors. The planning and design of tall buildings require different criteria than those that exist in regular size buildings. Tall buildings are uniquely expressed by their structural systems where exterior esthetic and requirements of space drive the form and composition of the structural systems. Therefore the exploration of design factors is the key to achieve optimum building systems. Optimization as mentioned here is associated with the efficiency of the different building systems. To achieve an optimal system, there is a need for an understanding of the factors that affect on overall tall building design such as planning module, building function, lease span, floor-to-floor-height, building height (aspect ratio), structural system, environmental systems. In this paper a statistical approach will be used and will be based on data collected from the practice through a rigorous survey taken. This information is tabulated and analyzed. The major target of investigation will be lease span related to space requirement in the tall building planning. Factors related to lease spans, such as function, floor-to-floor height, planning module, building height, overall plan dimension, and plan ratio (building geometry), will be looked at carefully. IN conclusion, this approach of optimization can introduce a preliminary design guideline for tall building projects. The purpose of the paper should shed some light on the optimum tall building design criteria.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.166-171
• /
• 2008

In this paper, the optimization design module for the brake system of a vehicle is developed. As using this module, design variables, that minimize an object function and satisfy nonlinear constraint conditions, can be found easily. Before an optimization is operated, Plackett-Burman design, one of the factorial design methods, is used to choose the design variables which affect a response function significantly. Using the response surface analysis, second order recursive model function, which informs a relation between design variables and response function, is estimated. In order to verify the reliability of the model function, analysis of variances(ANOVA) table is used. The value of design variables which minimize the model function and satisfy the constraint conditions is predicted through Sequential Quadratic-Programming (SQP) method. As applying the above procedure to a real vehicle simulation model and comparing the values of object functions of a current and optimized system, the optimization results are verified.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.35-46
• /
• 2013

본 연구에서는 모듈러 강교량 상부모듈 구성파트의 효율적인 3차원 조립설계를 위하여 BIM(Building Information Modeling)의 핵심기술 요소인 파라메트릭 모델링 방법을 연구하였다. 모듈러 강교량 상부모듈 구성파트의 3차원 조립설계를 위하여 모듈의 조립체계를 상세수준(LoD: Level of Details) 3단계로 정의하였다. 모듈을 구성하는 각 파트들의 3차원 형상구성을 위한 요소들을 추출하여 매개변수, 매개변수에 따라 변하는 종속변수, 매개변수에 따라 변하지 않는 고정 값으로 구분하여 정의하였으며, 조립체계 단계에 따라 파트간의 공간적 조립규칙을 정의하였다. 공간적 위치를 구속하기 위하여 3차원 형상구성 요소간의 위치관계를 정의하였으며, X, Y, Z 축에 대한 자유도를 구속하기 위하여 기하학적 관계를 정의하였다. 또한, 정의한 조립규칙을 적용하여 모듈러 강교량 상부모듈의 3차원 조립설계를 위한 표준템플릿을 구축하였으며, 정의한 매개변수의 변화에 따른 강교량 상부모듈의 형상변화 검토를 통하여 파라메트릭 모델링 방법의 적용성을 검증하였다.

• 한국수자원학회논문집
• /
• 제51권6호
• /
• pp.491-501
• /
• 2018

본 연구는 도시 유역의 물 순환을 개선시키기 위해 최근 활발하게 적용되고 있는 저영향개발(low impact development, LID) 시설의 설계 및 계획 매개변수를 선정하기 위한 방법을 제시하였다. 이때 Storm Water Management Model (SWMM) 모형의 LID 시설 모의 기능을 활용하여 다양한 매개변수에 대해 민감도 분석 및 다양한 시나리오를 자동으로 수행하여 비교할 수 있도록 개발된 Water Management Analysis Module (WMAM)을 이용하였다. 본 연구는 최근 도시화가 진행되고 있는 서울의 한 유역에 적용하였다. 적용 결과 LID 중 하나인 투수성포장 시설이 없는 경우와 임의로 결정된 설계 및 계획 시나리오 보다 본 방법을 통해 도출된 시나리오가 총유출량 및 첨두유량 감소와 침투량 증가에 더 좋은 효과를 보였다. 향후 경제성을 고려한 방법을 개발한다면 실무에서도 활용될 수 있을 것으로 예상된다.

• 한국시뮬레이션학회논문지
• /
• 제17권1호
• /
• pp.43-52
• /
• 2008

HLA는 이기종 시뮬레이터간의 연동을 위한 상위레벨 개념으로서 IEEE 1516 표준이며 Run-Time Infrastructure(RTI)는 이를 구현한 라이브러리 형태의 소프트웨어이다. RTI의 시간 관리 서비스를 개발함에 있어 효율적인 설계와 GALT 계산 알고리즘은 반드시 고려해야 하는 사항이다. 그러나 기존의 많은 RTI의 시간 관리 서비스는 수정과 확장이 용이하지 않다. 몇몇 RTI가 이러한 단점을 극복하기 위하여 모듈화 설계방안을 제안하고 있지만 이들은 IEEE 1516 HLA/RTI에 적합하도록 설계 및 구현된 것이 아니라 HLA 1.3을 위한 것이었다. 많은 RTI는 GALT 계산 알고리즘으로 분산 시뮬레이션에서 널리 알려진 Mattern의 알고리즘을 이용하고 있다. 그러나 Mattern의 알고리즘을 IEEE 1516 HLA/RTI에 적용시키기에는 몇 가지 제약사항이 존재한다. 본 논문은 IEEE 1516 HLA/RTI를 만족하는 시간 관리 서비스의 모듈화 설계를 제안하고 이를 바탕으로 구현한다. 시간 관리 서비스 모듈을 TIME 모듈과 GALT 모듈로 나누는 설계방안을 제안하고 GALT 계산 알고리즘으로는 Mattern의 알고리즘을 수정 보완하였다. 그리고 제안한 설계방안대로 구현한 시간 관리 서비스 모듈의 성능을 살펴보기 위하여 실험을 수행하고 그 결과를 분석하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권3호
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.512-520
• /
• 2006

The effects of flexibilities of supporting structures on shaft alignment are growing as ship sizes are Increasing mainly for container carrier and LNG carrier. But, most of classification societies not only do not suggest any quantitative guidelines about the flexibilities but also do not have shaft alignment design program considering the flexibility of supporting structures. A newly developed program, which is based on innovative shaft alignment technologies including nonlinear elastic multi-support bearing concept and hull deflection database approach, has S basic modules : 1)fully automated finite element generation module, 2) hull deflection database and it's mapping module on bearings, 3) squeezing and oil film pressure calculation module, 4) optimization module and 5) gap & sag calculation module. First module can generate finite element model including shafts, bearings, bearing seats, hull and engine housing without any misalignment of nodes. Hull deflection database module has built-in absolute deflection data for various ship types, sizes and loading conditions and imposes the transformed relative deflection data on shafting system. The squeezing of lining material and oil film pressures, which are relatively solved by Hertz contact theory and built-in hydrodynamic engine, can be calculated and visualized by pressure calculation module. One of the most representative capabilities is an optimization module based on both DOE and Hooke-Jeeves algorithm.