• 한국전자통신학회논문지
• /
• 제18권5호
• /
• pp.945-952
• /
• 2023

본 논문에서는 안드로이드 플랫폼 기반의 GRS칩 구동 JNI 코드 응용 SW 설계 안드로이드 플랫폼 기반 동작 제스처 프레임 모듈 설계 제작하였다. 안드로이드 기반 모듈 설계, 안드로이드 기반 모듈 구현, 안드로이드 기반 기능 모듈 구현 설계로 응용애플리케이션 기반 네트워크 지원 API 기술 제안한 직렬 데이터 수신 모듈 설계를 하였다. 안드로이드 OS의 애플리케이션을 통해 무선 통신 디바이스로부터 데이터를 수신하기 위한 직렬 통신 드라이버, 라이브러리, 프레임워크의 클래스와 같은 안드로이드 애플리케이션을 통해 센서의 데이터 정보를 확인할 수 있었다. 또한 안드로이드에서의 어플리케이션들은 자바를 이용하여 좌우상하 4방향의 동작 제스처를 판단할 수 있는 응용 SW를 구현하였다.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.45-48
• /
• 2000

In this paper, we designed bluetooth module using 2.4 GHz ISM band. Bluetooth is wireless networking solution that connects PDA, cellular phone, printer, PC, etc each other. We integrated digital and RF part in one module. As a result, we can make low power consumption module that enables long battery life. In addition, we enlarged maximum available range of our module from 10m to l00m. This module satisfies bluetooth specification 1.0.

• 산업공학
• /
• 제14권2호
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.821-828
• /
• 2005

This paper was proposed Intelligent and wireless USN/RFID module system that can overcome disadvantage of existing RFID system with no sensing module and wire communication. The proposed USN/RFID system was designed and fabricated. After fabricating new system, we analyzed the characteristics of USN/RFID module. After design VCO block that is point circuit to develop next generation system one chip of RFID system. we were carried out simulation and verified the validity, this paper was showed that VCO system was enough usable in wireless network module. USN/RFID Reader module shows superior result that validity awareness distance corresponds to 30M in the case of USN and to 5M in RFID Reader's case and 900MHz of commercial frequency does practical use enoughly in range of high frequency. The USN/RFID Reader module is considered to act big role to Ubiqitous industry offering computing surrounding of new concept that is intelligence type service and that was associated to real time location system(RTLS). environment improvement/supervision. national defense, traffic administration etc.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.168-173
• /
• 2008

본 논문에서는 능동 위상 배열 레이다 시스템에 적용 가능한 송수신 모듈을 설계/제작/측정하였다. 송수신 모듈은 능동 위상 배열 시스템에서 배열의 빔 합성으로 TWTA와 유사한 고출력을 획득하면서 TWTA 같은 중앙 집중식 송신기보다 신뢰성이 높고 기계적 빔 조향보다 기민하게 빔 조향을 가능하게 하는 핵심 구성품이다. 제안된 송수신 모듈은 물리적으로 Brick구조이며, 전기적으로 common leg 구조로 구성되어 있다. 또한, 소형화를 위해 하나의 유전체 기판 위에 MCM(Multi Chip Module) 형태로 제작되었으며, 실제 군용 레이다 시스템에 적용 가능한 사양을 선정하여 측정하였고, 측정 결과를 통하여 송수신 모듈의 최적화 설계를 위해 고려해야 하는 사항들을 검토하였다.

• 디지털콘텐츠학회 논문지
• /
• 제17권3호
• /
• pp.173-180
• /
• 2016

본 논문에서는 종래의 보안관리 시스템과 송수신 모듈의 단점을 개선하기 위해 유무선 복합기능의 송수신 모듈과 이를 사용한 신뢰성 높은 실시간 보안시스템을 제안한다. 제안하는 복합 송수신모듈은 RF 제어 회로와 무선 송수신 회로로 구성된다. RF제어회로는 저전력 협대역 RF 송수신 시스템으로서 마이크로프로세서의 레지스터에 저장되어 있는 특정 주파수 대역을 불러올 수 있고, 임의로 값을 쓰거나 읽어 들여 임의 주파수의 송신출력을 사용자가 제어할 수 있도록 설계한다. RF 송신 모듈의 동작을 위한 구동 알고리듬을 제시하고 설계한 복합 송수신 모듈과 동작 알고리듬을 시작품으로 구현하여 실험을 통해 유효성을 확인한다.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.91-96
• /
• 2002

Recently industry has moved towards automated operations with the goal of achieving better product quality greater productivity and reliability The pump design in characterized by extensive utilization of the related database which contains performance data. The inputs to the system are through interactive dialogue sessions and the basic input consist of flow rate, head, of fluid efficiency and the customer special requirements. These basic inputs along with the numerous rules in the knowledge bases and the mathematical modeling enable the effective design of the pump industry This paper represents the development of an automatic pump design system that was composed of a main program the data input module the drawing module the drawing edit module and was programed by the AutoLISP language under the Auto CAD program The developed system ultimately generates the design for a pump through the AutoCAD language.

• 소성∙가공
• /
• 제8권5호
• /
• pp.454-464
• /
• 1999

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between the deformed blank contour and the target contour shape into account. the minimization object function R is proposed. Based on the method, a computer program composed of blank design module, FE-analysis module and mesh generation module is developed. The rollback method is applied to square cup, reentrant cross section, L-shaped cup drawing process with the flange of uniform size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary blank shape after several modifications. Good agreements are recognized between the numerical results and the published experimental results for initial blank shape and thickness strain distribution. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.111-118
• /
• 2018

Information communication authority module software contains various functions and services. A software test is the only acceptance test step. Recently, however, all development steps have become important. In particular, the software acceptance step is very high, and a study of the effective use of limited time and resources on acceptance step is needed. This study examined the efficiency of the Test Design Technique for Software Test. The proposed Test Design process was applied to the domain systems of info-communication and the degree of improvement was measured. This paper establishes Software Test design process Infrastructure based on the developed software.