• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.620-623
• /
• 2002

To cope with the challenge of competitive market, manufacturing system needs to be agile in terms of its reconfigurability and scalability. For a system to be adapted to changed requirements, decision support tools such as configurator have to be provided. This paper introduces the basic framework of a configurator for assembly system Based on the factory data model(FDM) depicting the overall structure of a manufacturing system, functions of the configurator are described, i.e., requirements analysis, module selection and configuration optimization.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.69-77
• /
• 1999

One of the objectives of any task design is to provide a safe and helpful workplace for the employees. The safety and health module may include means for confronting the design with safety and health regulations and standards as well as tools for obstacles and collisions detection (such as error models and simulators), Virtual Reality is a leading edge technology which has only very recently become available on platforms and at prices accessible to the majority of simulation engineers. The design of an automated manufacturing system is a complicated, multidisciplinary task that requires involvement of several specialists. In this paper, a design procedure that facilitates the safety and ergonomic considerations of an automated manufacturing system are described. The procedure consists of the following major steps. Data collection and analysis of the data, creation of a three-dimensional simulation model of the work environment, simulation for safety analysis and risk assessment, development of safety solutions, selection of the preferred solutions, implementation of the selected solutions, reporting, and training. When improving the safety of an existing system the three-dimensional simulation model helps the designer to perceive the work from operators point of view objectively and safely without the exposure to hazards of the actual system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (B)
• /
• pp.400-403
• /
• 2002

디지털 방송 시대가 개막되었다. Digital TV 소프트웨어는 디지털 방송을 위한 수신기 시스템이다. 복잡한 입력 데이터를 처리하기 때문에 시스템 자체도 복잡하고 방대해 Digital TV 소프트웨어를 테스트하는 것은 쉽지 않다. 본 논문은 MPEG-2 TS 표준 형식의 입력 데이터를 이용하여 테스트 데이터를 생성했던 기존 연구를 확장하여 Digital TV 소프트웨어의 특정 모듈을 테스트 하는 방안에 대해 제안한다. Digital TV 소프트웨어의 모듈을 분석하여 테스트 시나리오를 추출하고 테스트 시나리오에 MPEG-2 TS와의 연관관계를 적용하여 데스트 데이터를 생성한다. 본 논문에서 제안만 기법을 사용하면 D-TV 소프트웨어의 특정 모듈을 테스트 하는데 적합한 테스트 데이터를 선정할 수 있을 것이다

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.127-132
• /
• 2020

In this study, single-phase and three-level boost converters applied to the photovoltaic system were compared and analyzed in terms of efficiency and power density according to the input voltage and load conditions. For accurate analysis of efficiency, the losses in each device of the single-phase and three-level boost converters were derived using mathematical equations and simulations by using the PSIM thermal module. Then, the losses were compared with the efficiency confirmed through the actual experiments. Results confirmed that the efficiency and power density can be improved by applying the three-level boost converter to the system according to the selection of the switching frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1403-1412
• /
• 2019

A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.159-160
• /
• 2018

본 논문에서는 인덕션 쿠커의 토폴로지 중 하나인 직렬 공진 하프-브릿지 컨버터에 Wide-Bandgap 전력 반도체를 적용하여 전력 손실을 평가한다. 전력 반도체의 발전으로 Si-기반의 전력반도체를 대체할 GaN과 SiC의 Wide-Bandgap 소자들이 양산되고 있다. Wide-Bandgap 소자의 장점은 고주파수에서의 동작과 낮은 손실에 있다. 이에 인덕션 쿠커의 직렬 공진 하프-브릿지 컨버터에 Wide-Bandgap 전력반도체를 적용하여 전력 손실을 PSIM Thermal Module을 통해 평가하고 인덕션 쿠커에 적합한 소자를 선정한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.83-86
• /
• 2013

도시재생을 효율적으로 수행하기 위해서는 시간 공간속성을 가진 지표데이터를 기반으로 한 종합적인 분석이 가능한 진단체계의 구축이 필요하다. 본 연구에서는 이러한 진단체계 구축의 일환으로 도시 재생 대상지 선정 모듈을 개발하였다. 대상지 선정방식은 인구사회, 산업경제, 물리환경 부분별 진단지표 DB를 구축하고, 각 부문별 조건에 부합되는 지역을 선정하도록 하였다. 기준으로 설정된 조건 이외에 상세 분석을 위한 지표 조합방식을 도입하여 상세분석이 가능하도록 하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.31-38
• /
• 2023

This paper introduces a real-time face swapping system that enables video influencers to swap their faces with arbitrary generated face images of their choice. The system is implemented as a Django-based server that uses a REST request to communicate with the generative model,specifically the pretrained stable diffusion model. Once generated, the generated image is displayed on the front page so that the influencer can decide whether to use the generated face or not, by clicking on the accept button on the front page. If they choose to use it, both their face and the generated face are sent to the landmark extraction module to extract the landmarks, which are then used to swap the faces. To minimize the fluctuation of landmarks over time that can cause instability or jitter in the output, a temporal filtering step is added. Furthermore, to increase the processing speed the system works on a reduced set of the extracted landmarks.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.171-179
• /
• 1994

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implemen- tation details (such as robot selection, accessory design, and spatial layout) together with operation details, the computer aided design and analysis method should be sought. However, conventional robotic design systems and off-line programming systems cannot accommodate these inquiries in a unified fashion. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL (Simulation Package for Robotic Painting Line) users can design the painting objects (via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workpace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS).