• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1107-1114
• /
• 2010

In this paper, a development of a new 5 d.o.f. underwater manipulator which is actuated by electric motors capable of carrying over 20kg payload and of various operation under the water has been studied. The manipulator for applying to midium-sized AUV or ROV has been designed small and light but to handle a heavy 25kg payload. The joint actuator for the manipulator is designed and builted as a new modular typed double oil jacket for waterproofness. Also, superior joint torque performance of the developed joint actuator has been varified through tests in the air. And, a 5 d.o.f. highly perfomable underwater manipulator has been builted applying the developed underwater joint actuators.

• Ocean and Polar Research
• /
• v.25 no.3
• /
• pp.287-302
• /
• 2003

The seasonal variations in the circulation of the water mass in the East Sea/Japan Sea have been simulated using a free surface primitive ocean model, RIAMOM (RIAM Ocean Model), comparing the results from GFDL-MOM1 (Geophysical Fluid Dynamics Laboratory Modular Ocean Model, version 1.1, hereafter MOM) with the GDEM (Generalized Digital Environmental Model) data. Both models appear to successfully reproduce the distinct features of circulation in the East Sea/Japan Sea, such as the NB (Nearshore Branch) flowing along the Japanese coast, the EKWC (East Korean Warm Current) flowing northward along the Korean coast, and the NKCC/LCC (North Korean Cold Current/Liman Cold Current) flowing southwestward along Korean/Russian coast. RIAMOM has shown better performance, compared to MOM, in terms of the realistic simulation of the flow field in the East Sea/Japan Sea; RIAMOM has produced more rectified flows on the coastal region, for example, the narrower and stronger NKCC/LCC than MOM has. There is however obvious differences between the model results and the GDEM data in terms of the calculation of the water mass; both models have shown a tendency to overpredict temperature and underpredict salinity below 50m; more diffusive forms of thermocline and halocline have been simulated than noted in GDEM data.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.65-71
• /
• 2020

Recently, interest in the DC transmission is rapidly increasing worldwide. In many countries and leading companies are prior to the aggressive development of HVDC technology and application. Especially, VSC-HVDC system has been widely applied to transfer power at long distance between power plant and power consumption area. Therefore in this paper, we analyzed the benefit-cost of VSC-HVDC system which has more advantages than existing transmission system. The proposed system is MMC(Modular Multilevel Converter) VSC-HVDC system that have stability of Power Grid, interconnect Large-scale New Power Generation Plants by prevents Blackout. And MMC VSC-HVDC system Reduced the loss importing foreign systems. And the benefits were calculated in four stages, and the costs were applied to the actual project. By evaluating the various avoidance costs compared to the benefit-cost, it was confirmed that MMC VSC-HVDC system was advantageous in system stability and economic and social benefits.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.3-9
• /
• 2008

Recently, the plant industries are being activated and plant control systems use various technologies. Because the optimized design for the plants is very important for the reducing of operation and maintenance costs, automatic control systems become more important. Plant control systems consist of the master controller, the plant networks, the programming environment for engineering, monitoring software and the field devices. The control systems should have reliability, availability and safety. Modular architecture of hardware and software makes flexible configuration of the control systems. Each component should have diagnostic functions. It follows industrial standards and makes open systems. Open systems increase accessibility against the data which is distributed in the plants. The controllers including processor and communication modules use the up-to-date technology. They have real time and fault tolerant function by duplicating processors or networks. It also enables to make the distributed control systems. The distributed architecture makes more scalable main control system. Automatic control systems can be operated with better performance. In this paper, we analyzed the requirements of the seawater desalination plants and made some consideration facts for developing the optimized controller. Also we described the design concept of the main controller, which consists of several modules. We should validate and complement the design for the reliability and better performance.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.48-55
• /
• 1997

Advances in VLSI technology have brought us completely new design principles for the high-performance switching fabrics including ATM switches. From a practical point of view, port scalability of ATM switches emerges as an important issue while complexity and performance of the switches have been major issues in the switch design. In this paper, we propose a cost-effective approach to modular ATM switch design which provides the good scalability. Taking advantages of both time-division and space-division switch architectures, we propose a practically implementable large scale ATM switch architecture. We present a scalable shared buffer type switch for a building block and its expansion method. In our design, a large scale ATM switch is realized by interconnecting the proposed shared buffer switches in three stages. We also present an efficient control mechanism of the shared buffers, synchronization method for the switches in each stage, and a flow control between stages. It is believed that the proposed approach will have a significant impact on both improving the ATM switch performance and enhancing the scalability of the switch with a new cost-effective scheme for handling the traffic congestion. We show that the proposed ATM switch provides an excellent performance and that its cell delay characteristic is comparable to output queueing which provides the best performance in cell delay among known approaches.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.1-16
• /
• 2002

The need for network security is being increasing due to the development of information communication and internet technology. In this paper, firewall models, operating system models and other network component models are constructed. Each model is defined by basic or compound model, referencing DEVS formalism. These models and the simulation environment are implemented with MODSIM III, a general purpose, modular, block-structured high-level programming language which provides direct support for object-oriented programming and discrete-event simulation. In this simulation environment with representative attacks, the following three attacks are generated, SYN flooding and Smurf attack as an attack type of denial of service, Mail bomb attack as an attack type of e-mail. The simulation is performed with the models that exploited various security policies against these attacks. The results of this study show that the modeling method of packet filtering system, proxy system, unix and windows NT operating system. In addition, the results of the simulation show that the analysis of security performance according to various security policies, and the analysis of correlation between availability and confidentiality according to security empowerment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.66-72
• /
• 2000

As the demand for the design of modular manipulators or special purpose manipulators has increased, task based design to design an optimal manipulator for a given task become more and more important. However, the complexity with a large number of design parameters, and highly nonlinear and implicit functions are characteristics of a general manipulator design. To achieve the goal of task based design, it is necessary to develop a methodology to solve the complexity. This paper addresses how to determine the kinematic parameters of a two-degrees of freedom manipulator with parallelogram five-bar link mechanism from a given task, namely, how to map a given task into the kinematic parameters. With simplified example of designing a manipulator with five-bar link mechanism, the methodology for task based design is presented. And it introduces formulations of a given task and manipulator specifications, and presents a new dexterity measure for manipulator design. Also the optimization problem with constraints is solved by using a genetic algorithm that provides robust search in complex spaces.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.2
• /
• pp.79-88
• /
• 2013

Steel plate concrete (SC) composite structure is now being recognized as a promising technology applicable to nuclear power plants as it is faster and suitable for modular construction. It is required to identify its dynamic characteristics prior to perform the seismic design of the SC structure. Particularly, the damping ratio of the structure is one of the critical design factors to control the dynamic response of structure. This paper compares the criteria for the damping ratios of each type of structures which are prescribed in the regulatory guide for the nuclear power plant. In order to identify the damping ratio of SC shear wall, this study made SC wall specimens and conducted experiments by cyclic lateral load tests and vibration tests with impact hammer. During the lateral loading test, SC wall specimens exhibited large ductile capacities with increasing amplitude of loading due to the confinement effects by the steel plate and the damping ratios increased until failure. The experimental results show that the damping ratios increased from about 6% to about 20% by increasing the load from the safe shutdown earthquake level to the ultimate strength level.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.100-109
• /
• 2015

Mobile phone carriers face challenges from three synergistic dimensions: Wireless, social, and mobile. Despite significant advances that have been made about social networks and human mobility, respectively, our knowledge about the interplay between two layers remains largely limited, partly due to the difficulty in obtaining large-scale datasets that could offer at the same time social and mobile information across a substantial population over an extended period of time. In this paper, we take advantage of a massive, longitudinal mobile phone dataset that consists of human mobility and social network information simultaneously, allowing us to explore the impact of human mobility patterns on the underlying social network. We find that human mobility plays an important role in shaping both local and global structural properties of social network. In contrast to the lack of scale in social networks and human movements, we discovered a characteristic distance in physical space between 10 and 20 km that impacts both local clustering and modular structure in social network. We also find a surprising distinction in trajectory overlap that segments social ties into two categories. Our results are of fundamental relevance to quantitative studies of human behavior, and could serve as the basis of anchoring potential theoretical models of human behavior and building and developing new applications using social and mobile technologies.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.8
• /
• pp.452-461
• /
• 2003

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indicator system and its actual implementation in the existing nuclear power plants in Korea was performed first. The control rod position indicator having the high performance for SMART was developed on the basis of RSPT technology identified through the survey. The arrangement of permanent magnet and reed switches is the most important procedure in the design of control rod position indicator. The hysteresis of reed switches is one of the important factors in a repeat accuracy of control rod position indicator as well. This paper investigates efficiency of the magnetic flux concentrator and the hysteresis using FEM and verified differences in physicals characteristics by comparing the results of FEM and those of the experiment. As a result, it is shown that the characteristics of prototype control rod position indicator have a good agreement with the results of FEM.