• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.905-912
• /
• 2009

1-g shaking table test is conducted to evaluate the dynamic behavior of a soil-structure system under seismic loading condition. A consistent similitude law between the model and prototype is needed to predict the behavior of the prototype structure, quantitatively. The natural frequency of geomaterial decreases with the increase of shaking intensity because of the non-linear property of the geomaterial. This phenomenon affects the applicability of similitude laws in 1-g shaking table tests. In this study, a simple method is suggested to determine the frequency of the input motions in 1-g tests in order to enhance the applicability of similitude laws. Modified input frequency is calculated using the frequency ratio with consideration of the variation of the natural frequency according to the intensity of input ground acceleration. To verify the applicability of the suggested method, a series of 1-g shaking table tests were performed for three different sizes of model piles having an overburden mass on their heads by varying the acceleration and the frequency of input motion. The acceleration amplification ratio on the overburden mass, the lateral displacement at the pile head and the maximum bending moment along the pile depth were measured. The projected behaviors of the virtual prototype based on the measured values of the model tests, where the input frequencies were calculated by the new method, showed good consistency, verifying the applicability of the suggested method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.23-32
• /
• 2004

The local geologic and dynamic site characteristics, which include soil profiles, shear wave velocity profiles and depths to the bed rock were gathered from 148 sites all over the Korean peninsula and those values are compared to those in the western USA. Site response analyses were performed based on equivalent linear scheme using design rock-outcrop acceleration of 0.154g which corresponds to the collapse level of earthquake for seismic category I structure. The results show that the amplification factor based on Korean seismic design guideline underestimates the motion in short-period range and overestimates the motion in mid-period range. It is suggested that the existing Korean seismic guideline based on UBC is required to be modified considering dynamic site characteristics in Korea for the reliable estimation of site amplification.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.129-132
• /
• 1988

Ginseng is cultivated in Korea. Japan. China. the Soviet Union and North America. Studies of the macroclimate of each of these producing areas shows that ginseng has certain requirements for production. In each producing area the microclimate is modified in different ways. Comparisons of recent research data from North America. Korea and China is presented in order to define. more precisely. the various microclimate requirements for ginseng production. These include studies of light interception as influenced by different shade materials. In North America. wood. woven black polypropylene and knitted polyethylene shade are used. whereas in China. dried grasses are bound together in layers with wire and polyvinylchloride is inserted between the layers. The influence of these various shade materials in terms of crop grow1h and root yield are presented. The major effect of temperature seems to be on root growth. During much of the growing season optimum temperatures for root grow1h are not reached. Growth analysis data for different age plants are being used to show the effects of different soil temperature regimes on distribution of dry matter between the shoot and root.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.261-269
• /
• 2002

The objectives of this paper are to study the use of geotextile tribes for dewatering high water content sludges and sediments and to evaluate their feasibility and affecting fsctors. To accomplish these objectives, pressure filtration tests were conducted on woven geotextile (Geotex$\circledR$ 46T and 1212T) fir high water content materials with a modified experimental apparatus. Test results indicate that 1) the filter cake formed on the inside of the geotextile tube is the major contributor to the retention of fine particles, but also causes a decrease in permeability, 2) controlling the formation of the filter cake and thus achieving a balance between soil retention and permeability is vital to a successful project, and 3) geotextiles, sludge properties, and filtration pressures have some effects on the dewatering efficiency and dewatering rate.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.2
• /
• pp.35-44
• /
• 1981

This experiment was conducted to find out the consumptive use of irrigated water for calculation of duty water in paddy rice. Tall statured Japonica rice varieties, Nongbaek (early), Jinheung (medium) and Akibare (late), and short statured Tongil typed varieties, Josaeng Tongil(early), Suweon 264 (medium) and Suweon 258(late) were planted on the experimental farm of Kon-Kuk University in 1979. The results obtained in this study were as follows: 1. During the experimental period, the daily mean temperature was almost similar, the relative humidity was higher as much as 2.8%, the amount of rain fall was 100mm less and the pan evaporation was 70mm less compared with those of 30 years average, respectively. 2. The paddy soil was silty loam, which was suitable for the rice cultivation. 3. Varietal differences were find out for plant height, culm length, number of tillers, number of panicles, heading date, matured grain ratio, 1000-grain weight and rough rice yield. This difference might he the cause of varietal difference of the consumptive use of irrigated water during the rice growing period. 4. The evapotranspiration was gradually increased after transplanting and showed the peak from booting to heading stage of rice varieties. The average evapotranspiration through the whole growing period was 5.67-5. 80mm/day for tall statured Japonica varieties, and 5.99-6. 39mm/day for short statured Tongil typed varieties. 5. The ratio of evapotranspiration to pan-evaporation through the whole growing period was 1.49-1.50 for Japonica varieties, and 1.60-1.66 for Tongil typed varies. 6. Average amount of percolation in paddy field was 3. 62mm/day through the whole growing period of rice plant. 7. K-value in Blaney & Criddle formula was 0.94-0.98 for Japonica varieties and 1.02-1.08 for Tongil typed varieties, and coefficient consumptive water use (Kc-value) was 0.95-1.02 for Japonica varieties and 1.04-1.12 for Tongil typed varieties in this study. The modified coefficient for consumptive water use, which was calculated from data collected through the country including this study, was as follows;

• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.59-67
• /
• 2011

A bacterial strain CH-67 which exhibits antagonism towards several plant pathogenic fungi such as Botrytis cinerea, Fulvia fulva, Rhizoctonia solani, Sclerotinia sclerotiorum, Colletotrichum sp. and Phytophthora sp. was isolated from forest soil by a chitin-baiting method. This strain was identified as Burkholderia cepacia complex (Bcc) and belonging to genomovar IX (Burkholderia pyrrocinia) by colony morphology, biochemical traits and molecular method like 16S rRNA and recA gene analysis. This strain was used to develop a bio-fungicide for the control of tomato leaf mold caused by Fulvia fulva. Various formulations of B. pyrrocinia CH-67 were prepared using fermentation cultures of the bacterium in rice oil medium. The result of pot experiments led to selection of the wettable powder formulation CH67-C containing modified starch as the best formulation for the control of tomato leaf mold. CH67-C, at 100-fold dilution, showed a control value of 85% against tomato leaf mold. Its disease control efficacy was not significantly different from that of the chemical fungicide triflumidazole. B. pyrrocinia CH-67 was also effective in controlling damping-off caused by Rhizoctonia solani PY-1 in crisphead lettuce and tomato plants. CH67-C formulation was recognized as a cell-free formulation since B. pyrrocinia CH-67 was all lethal during formulation process. This study provides an effective biocontrol formulation of biofungicide using B. pyrrocinia CH-67 to control tomato leaf mold and damping-off crisphead lettuce and tomato.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.2
• /
• pp.37-51
• /
• 2019

This study focuses on the numerical simulations of the cone penetration tests in a sand ground. The mechanical responses of sand were described using the modified Mohr Coulomb plasticity model based on the critical state soil mechanics. In the plasticity model, the dilatancy angle was not a constant, but a function of the distance to the critical state line from the current state of void ratio and mean effective stress. To simulate cone penetration tests numerically, this study relied on Lagrangian finite element method under the axisymmetric condition. To enable penetration of the cone penetrometer without tearing elements along the symmetric axis, the penetration guide concept was adopted in this study. The results of numerical simulations on the calibration chamber cone penetration tests had good agreement with the experimental results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.501-508
• /
• 2022

Required essential technique is to determine the maximum recharge pressure in the well with condition of non-ground failure for the recovery of the groundwater. Based on the classical soil mechanics, the maximum recharge pressure was estimated with the numerical anlaysis and laboratory triaxial test. In the numerical analysis, the maximum recharge pressure is defined as the ground failure stress. The ground failure of the sand was defined as the piping and the one of the caly was to the undrained failure by the confined pressure increment. In the triaxial test, the recharge pressure in the ground was modified by the back pressure in the specimen. In case of sand, the volume strain was dramatically increased at the 93 % of the maximum back pressure, same meaning of the 0 effective stress state. In case of clay, the only radial volume strain was to reached 1.5 % without failure. Therefore, The maximum recharge pressure could be determined with the numerical analysis and triaxial test.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.37-45
• /
• 2021

Flooding damage may occur due to an unexpected increase in rainfall in summer. Previously, the roughness coefficient, which is a major factor of conveyance, was calculated through on-site measurement, but in case of on-site measurement, there are many limits in accurately grasping changes in vegetation. In this study, the vegetation index (NDVI) was calculated using the Sentinel-2 optical images, and the modified roughness coefficient was calculated through the density and distribution area of the vegetation. Then the calculated roughness coefficient was applied to HEC-RAS 1D model and verified by comparing the results with the water level at the water level station directly downstream of the Soyang River dam. As a result, the error rate of the water level decreased about 14% compared to applying the previous roughness coefficient. Through this, it is expected that it will be possible to refine the flood level of rivers in consideration of seasonal flood characteristics and to efficiently maintain rivers in specific sections.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.47-55
• /
• 2009

As a conventional line-fitting method, the Bouwer and Rice method has been popularly adopted to estimate the hydraulic conductivity of an aquifer through a slug test. Because a vertical cutoff wall is usually very compressible and features a small wall thickness, the Bouwer and Rice method should be carefully applied to analyzing slug test results to estimate the hydraulic conductivity of vertical cutoff walls. In addition, a relatively impermeable layer, called a filter cake, formed at the interface between the cutoff wall and the natural soil formation makes it difficult to use the Bouwer and Rice method directly. In order to overcome such limitations, the original Bouwer and Rice method has been modified by incorporating the concept of the flow net method. In this modification, the geometry condition of cutoff walls including the filter cake is effectively considered in evaluating the hydraulic conductivity of a vertical cutoff wall.