• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.387-391
• /
• 2014

Self-assembled InAlAs/AlGaAs quantum dots (QDs) on GaAs substrates were grown by using modified molecular epitaxy beam in Stranski-Krastanov method. In order to study the structural and optical properties of InAlAs/AlGaAs QDs, atomic force microscopy (AFM) and photoluminescence (PL) measurements are conducted. The size and uniformity of QDs have been observed from the AFM images. The average widths and heights of QDs are increased as the deposition time increases. The PL spectra of QDs are composed of two peaks. The PL spectra of QDs were analyzed by the excitation laser power- and temperature-dependent PL, in which two PL peaks are attributed to two predominant sizes of QDs.

• Environmental Engineering Research
• /
• 제9권4호
• /
• pp.168-174
• /
• 2004

• Applied Science and Convergence Technology
• /
• 제24권4호
• /
• pp.111-116
• /
• 2015

The graphene oxide (GO) and graphene oxide quantum dots (GOQDs), which have gained research interest as new types of light-emitting materials, were synthesized by the modified Hummers method for oxidation of graphite flake and graphite nanoparticle. The optical properties of GO and GOQDs have been compared by mean of photoluminescence (PL), PL excitation (PLE), UV-vis absorbance, and time-resolved PL. The GO have an absorption peak at 229 nm and shoulder part at 310 nm, whereas the GOQDs show broad absorption with a gradual change up without any absorption peaks. The PL emission of GOQDs and GO showed the green color at 520 nm and the red color at 690 nm, respectively. The red emission of GO showed faster PL decay time than the green emission of GOQDs. In particular, the temporal PL profile of the GO showed redshift from 560 nm to 660 nm after the pump event.

• 대한수학교육학회지:학교수학
• /
• 제18권3호
• /
• pp.479-501
• /
• 2016

본 연구는 예비 고등학교 3학년 학생 20명을 대상으로 수학 교과서, G+, 수능기출문제를 학습도구로 하여 2015년 12월 24일부터 9주간 프로젝트를 진행하였다. 본 연구의 목적은 온라인과 오프라인을 연계한 혼합형 학습 방법인 '수학 교과서 프로젝트 학습(MtPL)'을 개발하여, MtPL이 고등학생들의 정의적 영역에 어떤 영향을 미쳤는지 분석하는 것이다. 연구결과에 의하면 MtPL은 학생들의 자기효능감, 자신감에 긍정적인 영향을 주었고, 교과서를 이용한 협력학습과 교사의 역할은 수학 학습에서 도구적 동기로 작용했다는 것을 알 수 있었다. 본 연구는 입시에 성공하기 위해서 더 어려운 수학 문제를 풀어야 한다는 우리나라 고등학생들의 수학 학습 방법에 대한 인식이 수정되어야 함을 시사하고 있다. 또한 교과서를 활용한 수능 준비와 수학 학습에서 교과서의 이용은 학생들에게 긍정적으로 작용했음을 알 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.242-244
• /
• 1992

Conventionally in the industrial control, PlD controller has been used because of its robustness, and nonlinear characteristic of a system under control. Although the PlD controller produce suitable parameter of the each system and also variable of PlD controller should be changed according to environment, disturbance, load. In this paper, the convergence and learning accuracy of the back-propagation(BP) method in neural network are investigated by analyzing the reason for decelerating the convergence of BP method. and examining the rapid deceleration of the convergence when the learning is executed on the part of sigmoid activation function with the very small first derivative. The modified logistic activation function it proposed by defining the convergence factor based on the analysis and applied to the position and speed control of a DC-servo motor. This paper revealed for experimental, a neural network and a PD controller combined off-line system using developed the position and speed characteristics of a DC-servo motor.

• Journal of Microbiology and Biotechnology
• /
• 제25권3호
• /
• pp.358-365
• /
• 2015

ε-Poly-L-lysine (ε-PL) is a homopolymer of L-lysine molecules connected between the epsilon amino and alpha carboxyl groups. This polymer is currently used as a natural preservative in food. Insufficient biomass is a major problem in ε-PL fermentation. Here, to improve cell growth and ε-PL productivity, various nitrogen-rich nutrients were supplemented into flask cultures after 16 h cultivation, marking the onset of ε-PL biosynthesis. Yeast extract, soybean powder, corn powder, and beef extract significantly improved cell growth. In terms of ε-PL productivity, yeast extract at 0.5% (w/v) gave the maximum yield (2.24 g/l), 115.4% higher than the control (1.04 g/l), followed by soybean powder (1.86 g/l) at 1% (w/v) and corn powder (1.72 g/l) at 1% (w/v). However, supplementation with beef extract inhibited ε-PL production. The optimal time for supplementation for all nutrients examined was at 16 h cultivation. The kinetics of yeast-extract-supplemented cultures showed enhanced cell growth and production duration. Thus, the most commonly used two-stage pH control fed-batch fermentation method was modified by omitting the pH 5.0-controlled period, and coupling the procedure with nutrient feeding in the pH 3.9-controlled phase. Using this process, by continuously feeding 0.5 g/h of yeast extract, soybean powder, or corn powder into cultures in a 30 L fermenter, the final ε-PL titer reached 28.2 g/l, 23.7 g/l, and 21.4 g/l, respectively, 91.8%, 61.2%, and 45.6% higher than that of the control (14.7 g/l). This describes a promising option for the mass production of ε-PL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.337-339
• /
• 1992

This paper deals with the tuning method of PID controls for process controls. It introduces the normalized process gain and the normalized process dead-time for processes based on Ziegler-Nichols tuning methods. In the case of PID auto-tuning, the first, this method applies Ziegler-Nichols tuning method and introduces the set-point weighting for reducing overshoot in the large normalized process gain or small normalized process dead-time, the second, this method is modified and includes the set-point weighting in the small normalized process gain or large normalized process dead-time. In the case of PI auto-tuning, this method is modified for reducing overshoot. This paper obtains empirical data with Ziegler-Nichols methods for refined Ziegler-Nichols tuning methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.225-230
• /
• 1988

In this paper, a new method for determining the order of AR, ARMA processes based on PLS (predictive least square) principle is proposed, This method using modified lattice algorithm which has additional step is amenable to on-line or adaptive operation and is more accurate than any other mpthod. Some computer simulations are presented to show the efficiency of the proposed algorithms.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.1-6
• /
• 2019

유기 염료가 도핑 된 실리카 나노입자는 바이오 라벨링, 바이오 이미징 및 바이오 센싱에 사용되고 있는 유망한 나노소재이다. 일반적으로 형광 실리카 나노입자는 수정된 스토버 방법($St{\ddot{o}}ber$ Method)으로 합성된다. 본 연구에서는 다양한 크기를 갖는 염료가 첨가되지 않은 형광 실리카 나노입자를 수정된 스토버 합성법인 졸겔 공정으로 합성하였다. 졸겔 공정 중에 기능성 물질인 APTES를 첨가제로 첨가하였다. 졸겔 공정으로 합성된 실리카 나노입자는 $400^{\circ}C$에서 2시간 동안 하소되었다. 합성된 실리카 나노입자의 표면형상과 크기를 전계방출 주사전자현미경으로 조사하였고, 합성된 실리카 나노입자의 형광 특성은 파장 365 nm의 자외선 램프를 조사하여 확인하였다. 또한 합성된 실리카 나노입자의 광발광 (PL) 특성을 형광 분석 형광법으로 조사하였다. 그 결과 합성된 실리카 나노입자는 입자의 크기와 무관하게 모두 청색 형광 특성을 갖는 것으로 확인되었다. 특히, 실리카 나노입자의 크기가 증가할수록 PL 강도는 감소하였다. 염료가 첨가되지 않은 실리카 나노입자의 청색 형광 특성은 APTES 층의 $NH_2$ 기능기와 실리카 매트릭스 뼈대 내부의 산소관련 결함과의 결합에 기인하는 것으로 추정된다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.353-366
• /
• 2021

In this study, photocatalytic degradation of ammonia in petrochemical wastewater is investigated by solar light photocatalysis. Two-dimensional ultra-thin atomic layer structured MoS₂ are synthesized via a simple hydrothermal method. We examine all prepared samples by means of physical techniques, such as SEM-EDX, HRTEM, FT-IR, BET, XRD, XPS, DRS and PL. And, we use fullerene modified MoS₂ nanosheets to enhance the activity of photochemically generated oxygen (PGO) species. Surface area and pore volumes of the MoS₂-fullerene samples significantly increase due to the existence of MoS₂. And, PGO oxidation of MB, TBA and TMST, causing its concentration in aqueous solution to decrease, is confirmed by the results of PL. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the PGO effect increase in the case with modified fullerene. The experimental results show that this heterogeneous catalyst has a degradation of 88.43% achieved through visible light irradiation. The product for the degradation of NH₃ is identified as N₂, but not NO^2- or NO^3-.